IPAC2019 - List of Authors (Angier, B.J.)

Paper	Title	Page
TUPGW098	Fabrication & Cold Tests of a Millimeter-Period RF Undulator	1643
	F. Toufexis, B.J. Angier, D. Gamzina, S.G. Tantawi SLAC, Menlo Park, California, USA
	Funding: This project was funded by U.S. Department of Energy under Contract No. DE-AC02-76SF00515, and the National Science Foundation under Contract No. PHY-1415437. To reduce the linac energy required for an FEL radiating at a given wavelength, and hence its size, a smaller undulator period with sufficient field strength is needed. Previous work from our group successfully demonstrated a microwave undulator at 11.424GHz, using a corrugated cylindrical waveguide operating at the HE11 modes. We have designed a mm-wave undulator cavity at 91.392GHz* with an equivalent undulator period of 1.75 mm. This undulator requires 1.4 MW for sub microsecond pulses for an equivalent K value of 0.1. In this work we present the mechanical design and fabrication of this 91.392 GHz RF Undulator, as well as preliminary cold test data. * F. Toufexis and S.G. Tantawi, "A 1.75-mm Period RF-Driven Undulator", Proceedings of IPAC17.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPGW098
About •	paper received ※ 10 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPTS063	Development of a W-Band Power Extraction Structure	4252
	F. Toufexis, B.J. Angier, D. Gamzina, A. McGuire, M. Shumail, S.G. Tantawi SLAC, Menlo Park, California, USA
	Funding: This project was funded by U.S. Department of Energy under Contract No. DE-AC02-76SF00515, and the National Science Foundation under Contract No. PHY-1415437. We are modifying the X-Band Test Accelerator at SLAC to operate as an Extreme Ultra Violet (EUV) light source. The existing photo electron gun will be replaced by a thermionic X-Band injector which utilizes RF bunch compression. The beam is accelerated up to 129 MeV using an X-Band traveling wave structure followed by a novel high shunt impedance standing wave structure. The beam then goes through a mm-wave undulator with a period of 1.75 mm, producing EUV radiation around 13.5 nm. The undulator is powered by a W-Band decelerator structure, which extracts the RF power from the electron beam. In this work we present the mechanical design and fabrication of the 91.392 GHz decelerator structure, as well as structural characterization of its cavities using SEM and 3D microscopy. F. Toufexis, et al, "A Compact EUV Light Source using a mm-wave Undulator", Proceedings of IPAC17.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPTS063
About •	paper received ※ 10 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Fabrication & Cold Tests of a Millimeter-Period RF Undulator

1643

F. Toufexis, B.J. Angier, D. Gamzina, S.G. Tantawi
SLAC, Menlo Park, California, USA

Funding: This project was funded by U.S. Department of Energy under Contract No. DE-AC02-76SF00515, and the National Science Foundation under Contract No. PHY-1415437.
To reduce the linac energy required for an FEL radiating at a given wavelength, and hence its size, a smaller undulator period with sufficient field strength is needed. Previous work from our group successfully demonstrated a microwave undulator at 11.424GHz, using a corrugated cylindrical waveguide operating at the HE11 modes. We have designed a mm-wave undulator cavity at 91.392GHz* with an equivalent undulator period of 1.75 mm. This undulator requires 1.4 MW for sub microsecond pulses for an equivalent K value of 0.1. In this work we present the mechanical design and fabrication of this 91.392 GHz RF Undulator, as well as preliminary cold test data.
* F. Toufexis and S.G. Tantawi, "A 1.75-mm Period RF-Driven Undulator", Proceedings of IPAC17.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPGW098

About •

paper received ※ 10 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPTS063

Development of a W-Band Power Extraction Structure

4252

F. Toufexis, B.J. Angier, D. Gamzina, A. McGuire, M. Shumail, S.G. Tantawi
SLAC, Menlo Park, California, USA

Funding: This project was funded by U.S. Department of Energy under Contract No. DE-AC02-76SF00515, and the National Science Foundation under Contract No. PHY-1415437.
We are modifying the X-Band Test Accelerator at SLAC to operate as an Extreme Ultra Violet (EUV) light source*. The existing photo electron gun will be replaced by a thermionic X-Band injector which utilizes RF bunch compression. The beam is accelerated up to 129 MeV using an X-Band traveling wave structure followed by a novel high shunt impedance standing wave structure. The beam then goes through a mm-wave undulator with a period of 1.75 mm, producing EUV radiation around 13.5 nm. The undulator is powered by a W-Band decelerator structure, which extracts the RF power from the electron beam. In this work we present the mechanical design and fabrication of the 91.392 GHz decelerator structure, as well as structural characterization of its cavities using SEM and 3D microscopy.
* F. Toufexis, et al, "A Compact EUV Light Source using a mm-wave Undulator", Proceedings of IPAC17.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPTS063

About •

paper received ※ 10 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)