IPAC2019 - List of Authors (Alesini, D.)

Paper	Title	Page
TUPRB032	The CompactLight Design Study Project	1756
	G. D’Auria, S. Di Mitri, R.A. Rochow Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy M. Aicheler HIP, University of Helsinki, Finland A.A. Aksoy Ankara University, Accelerator Technologies Institute, Golbasi, Turkey D. Alesini, M. Bellaveglia, B. Buonomo, F. Cardelli, M. Croia, M. Diomede, M. Ferrario, A. Gallo, A. Giribono, L. Piersanti, B. Spataro, C. Vaccarezza INFN/LNF, Frascati, Italy R. Apsimon, A. Castilla Cockcroft Institute, Lancaster University, Lancaster, United Kingdom J.M. Arnesano, F. Bosco, L. Ficcadenti, A. Mostacci, L. Palumbo Sapienza University of Rome, Rome, Italy A. Bernhard, J. Gethmann KIT, Karlsruhe, Germany G. Burt Lancaster University, Lancaster, United Kingdom M. Calvi, T. Schmidt, K. Zhang PSI, Villigen PSI, Switzerland H.M. Castaneda Cortes, J.A. Clarke, D.J. Dunning, N. Thompson STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom A.W. Cross, L. Zhang USTRAT/SUPA, Glasgow, United Kingdom G. Dattoli, F. Nguyen, A. Petralia ENEA C.R. Frascati, Frascati (Roma), Italy R.T. Dowd, D. Zhu AS - ANSTO, Clayton, Australia W.D. Fang SINAP, Shanghai, People’s Republic of China A. Faus-Golfe, Y. Han LAL, Orsay, France E.N. Gazis, N. Gazis National Technical University of Athens, Zografou, Greece R. Geometrante, M. Kokole KYMA, Trieste, Italy V.A. Goryashko, M. Jacewicz, R.J.M.Y. Ruber Uppsala University, Uppsala, Sweden X.J.A. Janssen, J.M.A. Priem VDL ETG, Eindhoven, The Netherlands A. Latina, X. Liu, C. Rossi, D. Schulte, S. Stapnes, X.W. Wu, W. Wuensch CERN, Geneva, Switzerland O.J. Luiten, P.H.A. Mutsaers, X.F.D. Stragier TUE, Eindhoven, The Netherlands J. Marcos, E. Marín, R. Muñoz Horta, F. Pérez ALBA-CELLS Synchrotron, Cerdanyola del Vallès, Spain G. Taylor The University of Melbourne, Melbourne, Victoria, Australia
	Funding: This project has received funding from the European Union’s Horizon2020 research and innovation programme under grant agreement No 777431 The H₂020 CompactLight Project (www. CompactLight.eu) aims at designing the next generation of compact X-rays Free-Electron Lasers, relying on very high gradient accelerating structures (X-band, 12 GHz), the most advanced concepts for bright electron photo injectors, and innovative compact short-period undulators. Compared to existing facilities, the proposed facility will benefit from a lower electron beam energy, due to the enhanced undulators performance, and will be significantly more compact, with a smaller footprint, as a consequence of the lower energy and the high-gradient X-band structures. In addition, the whole infrastructure will also have a lower electrical power demand as well as lower construction and running costs.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPRB032
About •	paper received ※ 15 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPTS024	Design of a Full C-Band Injector for Ultra-High Brightness Electron Beam	1979
	D. Alesini, F. Cardelli, G. Castorina, M. Croia, M. Diomede, M. Ferrario, A. Gallo, A. Giribono, B. Spataro, C. Vaccarezza, A. Vannozzi INFN/LNF, Frascati, Italy
	High gradient rf photo-injectors have been a key development to enable several applications of high quality electron beams. They allow the generation of beams with very high peak current and low transverse emittance, satisfying the tight demands for free-electron lasers, energy recovery linacs, Compton/Thomson sources and high-energy linear colliders. In the paper we present the design of a new full C-band RF photo-injector recently developed in the framework of the XLS-Compact Light design study and of the EuPRAXIA@SPARC_LAB proposal. It allows to reach extremely good beam performances in terms of beam emittance (at the level of few hundreds nm), energy spread and peak current. The photo-injector is based on a very high gradient (>200 MV/m) ultra-fast (RF pulses <200 ns) C-band RF gun, followed by two C band TW structures. Different types of couplers for the 1.6 cell RF gun have been considered and also a new compact low pulsed heating coupler working on the TM020 mode on the full cell has been proposed. In the paper we report the design criteria of the gun, the powering system, and the results of the beam dynamics simulations. We also discuss the case of 1 kHz repetition rate.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPTS024
About •	paper received ※ 15 May 2019 paper accepted ※ 21 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEZPLM1	The LATINO Project - An Italian Perspective on Connecting SMEs with Research Infrastructures	2277
	L. Sabbatini, D. Alesini, A. Falone, A. Gallo INFN/LNF, Frascati (Roma), Italy V. Pettinacci INFN-Roma, Roma, Italy
	Funding: The LATINO project is co-funded by the Regione Lazio within POR-FESR 2014-2020 European activities (public call ’Open Research Infrastructures’). The National Laboratories of Frascati (LNF) are the first Italian research facility for the study of nuclear and subnuclear physics with accelerators and are the largest laboratories of the Italian National Institute for Nuclear Physics (INFN), the public body whose mission is theoretical, experimental and technological research in subnuclear, nuclear and astroparticle physics. LNF have an extensive experience in designing, installation, testing and operation of particle accelerators and the related technologies. The competences range over almost all the technologies related to particle accelerators, including radio frequency, vacuum, magnets and mechanics. LNF have always had a close relationship with the regional and national industries, stimulating the development and growth of the industrial background by means of close collaboration with partners. The LATINO (a Laboratory in Advanced Technologies for INnOvation) project is an initiative that fits into this path and aims to strengthen this relationship, allowing access to the technologies, instruments and competences not otherwise available to the enterprises. A modern vision of advanced economies recommends the Technology Transfer from the research world to the productive activities through the creation of research infrastructures as the most efficient system for generating innovation and economic development [1-3]. The Regione Lazio, despite hosting centres of excellence, has a delay in the establishment of this kind of infrastructures.
	Slides WEZPLM1 [4.103 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEZPLM1
About •	paper received ※ 15 May 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEZZPLS2	EuPRAXIA, a Step Toward a Plasma-Wakefield Based Accelerator With High Beam Quality	2291
	P.A.P. Nghiem, A. Chancé CEA-IRFU, Gif-sur-Yvette, France D. Alesini, E. Chiadroni, M. Croia, A. Del Dotto, M. Ferrario, A. Giribono, R. Pompili, S. Romeo, V. Shpakov, A. Stella, C. Vaccarezza INFN/LNF, Frascati, Italy A. Aschikhin, R.W. Aßmann, U. Dorda, A. Ferran Pousa, V. Libov, B. Marchetti, A. Martinez de la Ossa, D. Marx, P. Niknejadi, L. Schaper, E.N. Svystun, P.A. Walker, M.K. Weikum, J. Zhu DESY, Hamburg, Germany T. Audet, B. Cros, P. Lee, G. Maynard CNRS LPGP Univ Paris Sud, Orsay, France A. Beck, F. Massimo, A. Specka LLR, Palaiseau, France M. Chen, S.M. Weng Shanghai Jiao Tong University, Shanghai, People’s Republic of China A. Cianchi Università di Roma II Tor Vergata, Roma, Italy J.A. Clarke STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom M.-E. Couprie, A. Ghaith, D. Oumbarek Espinos SOLEIL, Gif-sur-Yvette, France G. Dattoli, F. Nguyen ENEA C.R. Frascati, Frascati (Roma), Italy N. Delerue LAL, Orsay, France R.A. Fonseca, L.O. Silva Instituto Superior Tecnico, Lisbon, Portugal L.A. Gizzi, G. Toci, P. Tomassini INO-CNR, Pisa, Italy A. Helm IST-UTL, Lisbon, Portugal B. Hidding Cockcroft Institute, Warrington, Cheshire, United Kingdom S.M. Hooker, R. Walczak Oxford University, Physics Department, Oxford, Oxon, United Kingdom M.G. Ibison, M. Vujanovic, C.P. Welsch, J. Wolfenden The University of Liverpool, Liverpool, United Kingdom D.A. Jaroszynski, F.Y. Li, Z.M. Sheng, S.M. Wiggins, S. Yoffe USTRAT/SUPA, Glasgow, United Kingdom K.O. Kruchinin, A.Y. Molodozhentsev ELI-BEAMS, Prague, Czech Republic L. Labate CNR/IPP, Pisa, Italy X. Li DESY Zeuthen, Zeuthen, Germany F. Mathieu LULI, Palaiseau, France Z. Mazzotta Ecole Polytechnique, Palaiseau, France T.J. Mehrling LBNL, Berkeley, USA A. Mosnier, C. Simon CEA, Gif-sur-Yvette, France A. Mostacci Rome University La Sapienza, Roma, Italy Z. Najmudin Imperial College of Science and Technology, Department of Physics, London, United Kingdom R. Pattathil, D. Symes STFC/RAL, Chilton, Didcot, Oxon, United Kingdom A.R. Rossi INFN-Milano, Milano, Italy T. Silva, J.M. Vieira IPFN, Lisbon, Portugal M.J.V. Streeter JAI, London, United Kingdom D. Terzani UniNa, Napoli, Italy
	Funding: European Union’s Horizon 2020 research and innovation programme under grant agreement No. 653782 The EuPRAXIA project aims at designing the world’s first accelerator based on plasma-wakefield advanced technique, which can deliver a 5 GeV electron beam with simultaneously high charge, low emittance and low energy spread to user’s communities. Such challenging objectives can only have a chance to be achieved when particular efforts are dedicated to identify the subsequent issues and to find the way to solve them. Many injection/acceleration schemes and techniques have been explored by means of thorough simulations in more than ten European institutes to sort out the most appropriate ones. The specific issues of high charge, high beam quality and beam extraction then transfer to the user’s applications, have been tackled with many innovative approaches. This article highlights the different advanced methods that have been employed by the EuPRAXIA collaboration and the preliminary results obtained. The needs in terms of laser and plasma parameters for such an accelerator are also summarized. - in 2017: Phys. Plasmas, 24,10,103120; Nat. Commun.8,15705; - in 2018: NIMA, 909,84-89; NIMA, 909,49-53; Phys. Rev.Acc. Beams, 21,111301; NIMA, 909,54-57; Phys. Rev.Acc. Beams, 21,052802; NIMA, 909,282-285
	Slides WEZZPLS2 [5.157 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEZZPLS2
About •	paper received ※ 12 April 2019 paper accepted ※ 17 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPGW022	A Numerical Analysis to Choose the Most Performing Optical Transition Radiation Screen	2518
	F. Cioeta, D. Alesini, A. Variola INFN/LNF, Frascati, Italy M. Ciambrella, A. Mostacci Sapienza University of Rome, Rome, Italy D. Cortis, M. Marongiu, V. Pettinacci INFN-Roma, Roma, Italy
	Optical Transition Radiation (OTR) screen represents the most appropriate instrument to measure and verify the characteristics of a beam spot size produced by a particle accelerator. In order to measure such beam properties, OTR screens have to sustain thermal and mechanical stresses due to the energy that several bunches deposit. Owing to these requirements, it is essential to identify the more suitable material to optimize the OTR dimensions and to get reliable measures from the diagnostic system. In this paper, we describe a numerical procedure to choose the most performing material taking into account the physical requirements of a multi-bunch high brightness. The procedure is based on a dedicated ANSYS script able to evaluate the fatigue life time of the material considering a high number of thermal cycles generated by several bunches. The main characteristic of this script is the capability to simulate the real thermal and mechanical effect on the target that the hitting particle beam produces. The numerical procedure has been applied to compare the performance of three relevant materials-Aluminium, Silicon and Graphite simulating a beam hitting with well-known parameters.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPGW022
About •	paper received ※ 13 May 2019 paper accepted ※ 18 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPGW025	High Level Software for Beam 6D Phase Space Characterization	2522
SUSPFO037	use link to see paper's listing under its alternate paper code
	V. Martinelli, D. Alesini, M. Ferrario, A. Giribono, S. Pioli, C. Vaccarezza, A. Variola INFN/LNF, Frascati, Italy A. Bacci INFN-Milano, Milano, Italy
	Operation of modern particle accelerators require high qualitity beams and conseguently sensitive diagnostic system in order to monitories and characterize the beam during the acceleration and transport. A turn-key high level software BOLINA (Beam Orbit for Linear Accelerators) has been developed to fully characterise the 6D beam phase space in order to help operator during commissioning with an easily scalable suite for any high brightness LINAC. In this work will be presented the diagnostic toolkit is presented as designed for the ELI-NP Gamma Beam System (GBS) a radiation source based on the Compton back scattering effect able to provide tunable gamma rays in the 0.2-20 MeV range with narrow bandwidth (0.3% and a high spectral density (10⁴ photons/sec/eV) by the Compton backscattering effect. BOLINA suite is design to be machine independent, thanks to the file exchanges with the EPICS based control system. Simulation of raw data of the ELI-NP-GBS accelerator has been used to test the capabilities of the diagnostic toolkit.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPGW025
About •	paper received ※ 15 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPMP009	LATINO: A Laboratory in Advanced Technologies for Innovation	3466
	L. Sabbatini, D. Alesini, A. Falone, A. Gallo INFN/LNF, Frascati (Roma), Italy V. Pettinacci INFN-Roma, Roma, Italy
	Funding: The LATINO project is co-funded by the Regione Lazio within POR-FESR 2014-2020 European activities (public call ’Open Research Infrastructures’). LATINO (a Laboratory in Advanced Technologies for INnOvation) is an open Research Infrastructure that will be hosted at the Frascati National Laboratories (LNF) of the Italian National Institute for Nuclear Physics (INFN). LATINO will allow the scientific community and the SMEs to get access to the technologies and competences developed for particle accelerators. The Infrastructure will be organized in four Laboratories: Radio Frequency, Vacuum and Thermal Treatments, Magnetic Measurements, Mechanical Integration. The list of the available instruments will include, besides others, a high power X-Band station to test cavities up to 50 Hz repetition rate and 200 MW input power, a network analyser to characterize microwave devices up to 100 GHz, a ultra high vacuum oven for thermal treatments and brazing, an outgassing measurement system to characterize vacuum materials, a stretched wire bench and a rotating coil for the magnetic field measurements of multipoles, environment and laser scanners. The regional and national industrial background comprises a remarkable number of highly qualified small and medium enterprises that could take advantage of the technologies offered by LATINO infrastructure to develop novel products within the Key Enabling Technologies and to get the access to new market segments. The Infrastructure will be fully operational at the beginning of 2020. For further information please visit www.latino.lnf.infn.it.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPMP009
About •	paper received ※ 15 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPGW026	Status of the Horizon 2020 EuPRAXIA Conceptual Design Study	3638
	M.K. Weikum, A. Aschikhin, R.W. Aßmann, R. Brinkmann, U. Dorda, A. Ferran Pousa, T. Heinemann, F. Jafarinia, A. Knetsch, C. Lechner, W. Leemans, B. Marchetti, A. Martinez de la Ossa, P. Niknejadi, J. Osterhoff, K. Poder, R. Rossmanith, L. Schaper, E.N. Svystun, G.E. Tauscher, P.A. Walker, J. Zhu DESY, Hamburg, Germany T. Akhter, S. De Nicola INFN-Napoli, Napoli, Italy D. Alesini, M.P. Anania, F.G. Bisesto, E. Chiadroni, M. Croia, A. Del Dotto, M. Ferrario, F. Filippi, A. Gallo, A. Giribono, R. Pompili, S. Romeo, J. Scifo, C. Vaccarezza, F. Villa INFN/LNF, Frascati, Italy A.S. Alexandrova, R. Torres, C.P. Welsch, J. Wolfenden The University of Liverpool, Liverpool, United Kingdom A.S. Alexandrova, A. Beaton, J.A. Clarke, A.F. Habib, T. Heinemann, B. Hidding, P. Scherkl, N. Thompson, R. Torres, D. Ullmann, C.P. Welsch, S.M. Wiggins, J. Wolfenden, G.X. Xia Cockcroft Institute, Warrington, Cheshire, United Kingdom N.E. Andreev, D. Pugacheva JIHT RAS, Moscow, Russia N.E. Andreev, D. Pugacheva MIPT, Dolgoprudniy, Moscow Region, Russia I.A. Andriyash, M.-E. Couprie, A. Ghaith, D. Oumbarek Espinos SOLEIL, Gif-sur-Yvette, France T. Audet, B. Cros, G. Maynard CNRS LPGP Univ Paris Sud, Orsay, France A. Bacci, D. Giove, V. Petrillo, A.R. Rossi, L. Serafini INFN-Milano, Milano, Italy I.F. Barna, M.A. Pocsai Wigner Research Centre for Physics, Institute for Particle and Nuclear Physics, Budapest, Hungary A. Beaton, A.F. Habib, T. Heinemann, B. Hidding, D.A. Jaroszynski, G.G. Manahan, P. Scherkl, Z.M. Sheng, D. Ullmann, S.M. Wiggins USTRAT/SUPA, Glasgow, United Kingdom A. Beck, F. Massimo, A. Specka LLR, Palaiseau, France A. Beluze, F. Mathieu, D.N. Papadopoulos LULI, Palaiseau, France A. Bernhard, E. Bründermann, A.-S. Müller KIT, Karlsruhe, Germany S. Bielawski, E. Roussel, C. Szwaj PhLAM/CERLA, Villeneuve d’Ascq, France F. Brandi, G. Bussolino, L.A. Gizzi, P. Koester, L. Labate, B. Patrizi, G. Toci, P. Tomassini, M. Vannini INO-CNR, Pisa, Italy M.H. Bussmann, A. Irman, U. Schramm HZDR, Dresden, Germany M. Büscher, A. Lehrach FZJ, Jülich, Germany A. Chancé, P.A.P. Nghiem, C. Simon CEA-IRFU, Gif-sur-Yvette, France M. Chen, Z.M. Sheng Shanghai Jiao Tong University, Shanghai, People’s Republic of China A. Cianchi Università di Roma II Tor Vergata, Roma, Italy A. Cianchi INFN-Roma II, Roma, Italy J.A. Clarke, N. Thompson STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom J. Cole, S.M. Hooker, M.J.V. Streeter, R. Walczak JAI, Oxford, United Kingdom P.A. Crump, M. Huebner FBH, Berlin, Germany G. Dattoli, F. Nguyen ENEA C.R. Frascati, Frascati (Roma), Italy N. Delerue, K. Wang LAL, Orsay, France J.M. Dias, R.A. Fonseca, J.L. Martins, L.O. Silva, T. Silva, U. Sinha, J.M. Vieira IPFN, Lisbon, Portugal R. Fedele, G. Fiore, D. Terzani UniNa, Napoli, Italy A. Ferran Pousa, T. Heinemann, V. Libov University of Hamburg, Hamburg, Germany M. Galimberti, P.D. Mason, R. Pattathil, D. Symes STFC/RAL, Chilton, Didcot, Oxon, United Kingdom L.A. Gizzi, L. Labate INFN-Pisa, Pisa, Italy F.J. Grüner, A.R. Maier CFEL, Hamburg, Germany F.J. Grüner, O.S. Karger, A.R. Maier University of Hamburg, Institut für Experimentalphysik, Hamburg, Germany C. Haefner, C. Siders LLNL, Livermore, California, USA B.J. Holzer CERN, Geneva, Switzerland S.M. Hooker University of Oxford, Oxford, United Kingdom T. Hosokai ISIR, Osaka, Japan C. Joshi UCLA, Los Angeles, California, USA M. Kaluza IOQ, Jena, Germany M. Kaluza HIJ, Jena, Germany M. Kando JAEA/Kansai, Kyoto, Japan S. Karsch LMU, Garching, Germany E. Khazanov, I. Kostyukov IAP/RAS, Nizhny Novgorod, Russia D. Khikhlukha, D. Kocon, G. Korn, K.O. Kruchinin, A.Y. Molodozhentsev, L. Pribyl ELI-BEAMS, Prague, Czech Republic O.S. Kononenko, A. Lifschitz LOA, Palaiseau, France C. Le Blanc, Z. Mazzotta Ecole Polytechnique, Palaiseau, France X. Li DESY Zeuthen, Zeuthen, Germany V. Litvinenko BNL, Upton, Long Island, New York, USA V. Litvinenko Stony Brook University, Stony Brook, USA W. Lu TUB, Beijing, People’s Republic of China O. Lundh Lund University, Lund, Sweden V. Malka Weizmann Institute of Science, Physics, Rehovot, Israel S.P.D. Mangles, Z. Najmudin, A.A. Sahai Imperial College of Science and Technology, Department of Physics, London, United Kingdom A. Mostacci INFN-Roma, Roma, Italy A. Mostacci Sapienza University of Rome, Rome, Italy C.D. Murphy York University, Heslington, York, United Kingdom V. Petrillo Universita’ degli Studi di Milano, Milano, Italy M. Rossetti Conti Universita’ degli Studi di Milano & INFN, Milano, Italy G. Sarri Queen’s University of Belfast, Belfast, Northern Ireland, United Kingdom C.B. Schroeder LBNL, Berkeley, California, USA C.-G. Wahlstrom Lund Institute of Technology (LTH), Lund University, Lund, Sweden R. Walczak Oxford University, Physics Department, Oxford, Oxon, United Kingdom G.X. Xia UMAN, Manchester, United Kingdom M. Yabashi RIKEN SPring-8 Center, Sayo-cho, Sayo-gun, Hyogo, Japan A. Zigler The Hebrew University of Jerusalem, The Racah Institute of Physics, Jerusalem, Israel
	Funding: This work was supported by the European Union’s Horizon 2020 Research and Innovation programme under grant agreement No. 653782. The Horizon 2020 Project EuPRAXIA (European Plasma Research Accelerator with eXcellence In Applications) is producing a conceptual design report for a highly compact and cost-effective European facility with multi-GeV electron beams accelerated using plasmas. EuPRAXIA will be set up as a distributed Open Innovation platform with two construction sites, one with a focus on beam-driven plasma acceleration (PWFA) and another site with a focus on laser-driven plasma acceleration (LWFA). User areas at both sites will provide access to FEL pilot experiments, positron generation and acceleration, compact radiation sources, and test beams for HEP detector development. Support centres in four different countries will complement the pan-European implementation of this infrastructure.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPGW026
About •	paper received ※ 26 April 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

The CompactLight Design Study Project

1756

G. D’Auria, S. Di Mitri, R.A. Rochow
Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy
M. Aicheler
HIP, University of Helsinki, Finland
A.A. Aksoy
Ankara University, Accelerator Technologies Institute, Golbasi, Turkey
D. Alesini, M. Bellaveglia, B. Buonomo, F. Cardelli, M. Croia, M. Diomede, M. Ferrario, A. Gallo, A. Giribono, L. Piersanti, B. Spataro, C. Vaccarezza
INFN/LNF, Frascati, Italy
R. Apsimon, A. Castilla
Cockcroft Institute, Lancaster University, Lancaster, United Kingdom
J.M. Arnesano, F. Bosco, L. Ficcadenti, A. Mostacci, L. Palumbo
Sapienza University of Rome, Rome, Italy
A. Bernhard, J. Gethmann
KIT, Karlsruhe, Germany
G. Burt
Lancaster University, Lancaster, United Kingdom
M. Calvi, T. Schmidt, K. Zhang
PSI, Villigen PSI, Switzerland
H.M. Castaneda Cortes, J.A. Clarke, D.J. Dunning, N. Thompson
STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom
A.W. Cross, L. Zhang
USTRAT/SUPA, Glasgow, United Kingdom
G. Dattoli, F. Nguyen, A. Petralia
ENEA C.R. Frascati, Frascati (Roma), Italy
R.T. Dowd, D. Zhu
AS - ANSTO, Clayton, Australia
W.D. Fang
SINAP, Shanghai, People’s Republic of China
A. Faus-Golfe, Y. Han
LAL, Orsay, France
E.N. Gazis, N. Gazis
National Technical University of Athens, Zografou, Greece
R. Geometrante, M. Kokole
KYMA, Trieste, Italy
V.A. Goryashko, M. Jacewicz, R.J.M.Y. Ruber
Uppsala University, Uppsala, Sweden
X.J.A. Janssen, J.M.A. Priem
VDL ETG, Eindhoven, The Netherlands
A. Latina, X. Liu, C. Rossi, D. Schulte, S. Stapnes, X.W. Wu, W. Wuensch
CERN, Geneva, Switzerland
O.J. Luiten, P.H.A. Mutsaers, X.F.D. Stragier
TUE, Eindhoven, The Netherlands
J. Marcos, E. Marín, R. Muñoz Horta, F. Pérez
ALBA-CELLS Synchrotron, Cerdanyola del Vallès, Spain
G. Taylor
The University of Melbourne, Melbourne, Victoria, Australia

Funding: This project has received funding from the European Union’s Horizon2020 research and innovation programme under grant agreement No 777431
The H₂020 CompactLight Project (www. CompactLight.eu) aims at designing the next generation of compact X-rays Free-Electron Lasers, relying on very high gradient accelerating structures (X-band, 12 GHz), the most advanced concepts for bright electron photo injectors, and innovative compact short-period undulators. Compared to existing facilities, the proposed facility will benefit from a lower electron beam energy, due to the enhanced undulators performance, and will be significantly more compact, with a smaller footprint, as a consequence of the lower energy and the high-gradient X-band structures. In addition, the whole infrastructure will also have a lower electrical power demand as well as lower construction and running costs.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPRB032

About •

paper received ※ 15 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPTS024

Design of a Full C-Band Injector for Ultra-High Brightness Electron Beam

1979

D. Alesini, F. Cardelli, G. Castorina, M. Croia, M. Diomede, M. Ferrario, A. Gallo, A. Giribono, B. Spataro, C. Vaccarezza, A. Vannozzi
INFN/LNF, Frascati, Italy

High gradient rf photo-injectors have been a key development to enable several applications of high quality electron beams. They allow the generation of beams with very high peak current and low transverse emittance, satisfying the tight demands for free-electron lasers, energy recovery linacs, Compton/Thomson sources and high-energy linear colliders. In the paper we present the design of a new full C-band RF photo-injector recently developed in the framework of the XLS-Compact Light design study and of the EuPRAXIA@SPARC_LAB proposal. It allows to reach extremely good beam performances in terms of beam emittance (at the level of few hundreds nm), energy spread and peak current. The photo-injector is based on a very high gradient (>200 MV/m) ultra-fast (RF pulses <200 ns) C-band RF gun, followed by two C band TW structures. Different types of couplers for the 1.6 cell RF gun have been considered and also a new compact low pulsed heating coupler working on the TM020 mode on the full cell has been proposed. In the paper we report the design criteria of the gun, the powering system, and the results of the beam dynamics simulations. We also discuss the case of 1 kHz repetition rate.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPTS024

About •

paper received ※ 15 May 2019 paper accepted ※ 21 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEZPLM1

The LATINO Project - An Italian Perspective on Connecting SMEs with Research Infrastructures

2277

L. Sabbatini, D. Alesini, A. Falone, A. Gallo
INFN/LNF, Frascati (Roma), Italy
V. Pettinacci
INFN-Roma, Roma, Italy

Funding: The LATINO project is co-funded by the Regione Lazio within POR-FESR 2014-2020 European activities (public call ’Open Research Infrastructures’).
The National Laboratories of Frascati (LNF) are the first Italian research facility for the study of nuclear and subnuclear physics with accelerators and are the largest laboratories of the Italian National Institute for Nuclear Physics (INFN), the public body whose mission is theoretical, experimental and technological research in subnuclear, nuclear and astroparticle physics. LNF have an extensive experience in designing, installation, testing and operation of particle accelerators and the related technologies. The competences range over almost all the technologies related to particle accelerators, including radio frequency, vacuum, magnets and mechanics. LNF have always had a close relationship with the regional and national industries, stimulating the development and growth of the industrial background by means of close collaboration with partners. The LATINO (a Laboratory in Advanced Technologies for INnOvation) project is an initiative that fits into this path and aims to strengthen this relationship, allowing access to the technologies, instruments and competences not otherwise available to the enterprises. A modern vision of advanced economies recommends the Technology Transfer from the research world to the productive activities through the creation of research infrastructures as the most efficient system for generating innovation and economic development [1-3]. The Regione Lazio, despite hosting centres of excellence, has a delay in the establishment of this kind of infrastructures.

Slides WEZPLM1 [4.103 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEZPLM1

About •

paper received ※ 15 May 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEZZPLS2

EuPRAXIA, a Step Toward a Plasma-Wakefield Based Accelerator With High Beam Quality

2291

P.A.P. Nghiem, A. Chancé
CEA-IRFU, Gif-sur-Yvette, France
D. Alesini, E. Chiadroni, M. Croia, A. Del Dotto, M. Ferrario, A. Giribono, R. Pompili, S. Romeo, V. Shpakov, A. Stella, C. Vaccarezza
INFN/LNF, Frascati, Italy
A. Aschikhin, R.W. Aßmann, U. Dorda, A. Ferran Pousa, V. Libov, B. Marchetti, A. Martinez de la Ossa, D. Marx, P. Niknejadi, L. Schaper, E.N. Svystun, P.A. Walker, M.K. Weikum, J. Zhu
DESY, Hamburg, Germany
T. Audet, B. Cros, P. Lee, G. Maynard
CNRS LPGP Univ Paris Sud, Orsay, France
A. Beck, F. Massimo, A. Specka
LLR, Palaiseau, France
M. Chen, S.M. Weng
Shanghai Jiao Tong University, Shanghai, People’s Republic of China
A. Cianchi
Università di Roma II Tor Vergata, Roma, Italy
J.A. Clarke
STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom
M.-E. Couprie, A. Ghaith, D. Oumbarek Espinos
SOLEIL, Gif-sur-Yvette, France
G. Dattoli, F. Nguyen
ENEA C.R. Frascati, Frascati (Roma), Italy
N. Delerue
LAL, Orsay, France
R.A. Fonseca, L.O. Silva
Instituto Superior Tecnico, Lisbon, Portugal
L.A. Gizzi, G. Toci, P. Tomassini
INO-CNR, Pisa, Italy
A. Helm
IST-UTL, Lisbon, Portugal
B. Hidding
Cockcroft Institute, Warrington, Cheshire, United Kingdom
S.M. Hooker, R. Walczak
Oxford University, Physics Department, Oxford, Oxon, United Kingdom
M.G. Ibison, M. Vujanovic, C.P. Welsch, J. Wolfenden
The University of Liverpool, Liverpool, United Kingdom
D.A. Jaroszynski, F.Y. Li, Z.M. Sheng, S.M. Wiggins, S. Yoffe
USTRAT/SUPA, Glasgow, United Kingdom
K.O. Kruchinin, A.Y. Molodozhentsev
ELI-BEAMS, Prague, Czech Republic
L. Labate
CNR/IPP, Pisa, Italy
X. Li
DESY Zeuthen, Zeuthen, Germany
F. Mathieu
LULI, Palaiseau, France
Z. Mazzotta
Ecole Polytechnique, Palaiseau, France
T.J. Mehrling
LBNL, Berkeley, USA
A. Mosnier, C. Simon
CEA, Gif-sur-Yvette, France
A. Mostacci
Rome University La Sapienza, Roma, Italy
Z. Najmudin
Imperial College of Science and Technology, Department of Physics, London, United Kingdom
R. Pattathil, D. Symes
STFC/RAL, Chilton, Didcot, Oxon, United Kingdom
A.R. Rossi
INFN-Milano, Milano, Italy
T. Silva, J.M. Vieira
IPFN, Lisbon, Portugal
M.J.V. Streeter
JAI, London, United Kingdom
D. Terzani
UniNa, Napoli, Italy

Funding: European Union’s Horizon 2020 research and innovation programme under grant agreement No. 653782
The EuPRAXIA project aims at designing the world’s first accelerator based on plasma-wakefield advanced technique, which can deliver a 5 GeV electron beam with simultaneously high charge, low emittance and low energy spread to user’s communities. Such challenging objectives can only have a chance to be achieved when particular efforts are dedicated to identify the subsequent issues and to find the way to solve them. Many injection/acceleration schemes and techniques have been explored by means of thorough simulations in more than ten European institutes to sort out the most appropriate ones. The specific issues of high charge, high beam quality and beam extraction then transfer to the user’s applications, have been tackled with many innovative approaches*. This article highlights the different advanced methods that have been employed by the EuPRAXIA collaboration and the preliminary results obtained. The needs in terms of laser and plasma parameters for such an accelerator are also summarized.
*- in 2017: Phys. Plasmas, 24,10,103120; Nat. Commun.8,15705; - in 2018: NIMA, 909,84-89; NIMA, 909,49-53; Phys. Rev.Acc. Beams, 21,111301; NIMA, 909,54-57; Phys. Rev.Acc. Beams, 21,052802; NIMA, 909,282-285

Slides WEZZPLS2 [5.157 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEZZPLS2

About •

paper received ※ 12 April 2019 paper accepted ※ 17 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPGW022

A Numerical Analysis to Choose the Most Performing Optical Transition Radiation Screen

2518

F. Cioeta, D. Alesini, A. Variola
INFN/LNF, Frascati, Italy
M. Ciambrella, A. Mostacci
Sapienza University of Rome, Rome, Italy
D. Cortis, M. Marongiu, V. Pettinacci
INFN-Roma, Roma, Italy

Optical Transition Radiation (OTR) screen represents the most appropriate instrument to measure and verify the characteristics of a beam spot size produced by a particle accelerator. In order to measure such beam properties, OTR screens have to sustain thermal and mechanical stresses due to the energy that several bunches deposit. Owing to these requirements, it is essential to identify the more suitable material to optimize the OTR dimensions and to get reliable measures from the diagnostic system. In this paper, we describe a numerical procedure to choose the most performing material taking into account the physical requirements of a multi-bunch high brightness. The procedure is based on a dedicated ANSYS script able to evaluate the fatigue life time of the material considering a high number of thermal cycles generated by several bunches. The main characteristic of this script is the capability to simulate the real thermal and mechanical effect on the target that the hitting particle beam produces. The numerical procedure has been applied to compare the performance of three relevant materials-Aluminium, Silicon and Graphite simulating a beam hitting with well-known parameters.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPGW022

About •

paper received ※ 13 May 2019 paper accepted ※ 18 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPGW025

High Level Software for Beam 6D Phase Space Characterization

2522

SUSPFO037

use link to see paper's listing under its alternate paper code

V. Martinelli, D. Alesini, M. Ferrario, A. Giribono, S. Pioli, C. Vaccarezza, A. Variola
INFN/LNF, Frascati, Italy
A. Bacci
INFN-Milano, Milano, Italy

Operation of modern particle accelerators require high qualitity beams and conseguently sensitive diagnostic system in order to monitories and characterize the beam during the acceleration and transport. A turn-key high level software BOLINA (Beam Orbit for Linear Accelerators) has been developed to fully characterise the 6D beam phase space in order to help operator during commissioning with an easily scalable suite for any high brightness LINAC. In this work will be presented the diagnostic toolkit is presented as designed for the ELI-NP Gamma Beam System (GBS) a radiation source based on the Compton back scattering effect able to provide tunable gamma rays in the 0.2-20 MeV range with narrow bandwidth (0.3% and a high spectral density (10⁴ photons/sec/eV) by the Compton backscattering effect. BOLINA suite is design to be machine independent, thanks to the file exchanges with the EPICS based control system. Simulation of raw data of the ELI-NP-GBS accelerator has been used to test the capabilities of the diagnostic toolkit.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPGW025

About •

paper received ※ 15 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPMP009

LATINO: A Laboratory in Advanced Technologies for Innovation

3466

L. Sabbatini, D. Alesini, A. Falone, A. Gallo
INFN/LNF, Frascati (Roma), Italy
V. Pettinacci
INFN-Roma, Roma, Italy

Funding: The LATINO project is co-funded by the Regione Lazio within POR-FESR 2014-2020 European activities (public call ’Open Research Infrastructures’).
LATINO (a Laboratory in Advanced Technologies for INnOvation) is an open Research Infrastructure that will be hosted at the Frascati National Laboratories (LNF) of the Italian National Institute for Nuclear Physics (INFN). LATINO will allow the scientific community and the SMEs to get access to the technologies and competences developed for particle accelerators. The Infrastructure will be organized in four Laboratories: Radio Frequency, Vacuum and Thermal Treatments, Magnetic Measurements, Mechanical Integration. The list of the available instruments will include, besides others, a high power X-Band station to test cavities up to 50 Hz repetition rate and 200 MW input power, a network analyser to characterize microwave devices up to 100 GHz, a ultra high vacuum oven for thermal treatments and brazing, an outgassing measurement system to characterize vacuum materials, a stretched wire bench and a rotating coil for the magnetic field measurements of multipoles, environment and laser scanners. The regional and national industrial background comprises a remarkable number of highly qualified small and medium enterprises that could take advantage of the technologies offered by LATINO infrastructure to develop novel products within the Key Enabling Technologies and to get the access to new market segments. The Infrastructure will be fully operational at the beginning of 2020. For further information please visit www.latino.lnf.infn.it.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPMP009

About •

paper received ※ 15 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPGW026

Status of the Horizon 2020 EuPRAXIA Conceptual Design Study

3638

M.K. Weikum, A. Aschikhin, R.W. Aßmann, R. Brinkmann, U. Dorda, A. Ferran Pousa, T. Heinemann, F. Jafarinia, A. Knetsch, C. Lechner, W. Leemans, B. Marchetti, A. Martinez de la Ossa, P. Niknejadi, J. Osterhoff, K. Poder, R. Rossmanith, L. Schaper, E.N. Svystun, G.E. Tauscher, P.A. Walker, J. Zhu
DESY, Hamburg, Germany
T. Akhter, S. De Nicola
INFN-Napoli, Napoli, Italy
D. Alesini, M.P. Anania, F.G. Bisesto, E. Chiadroni, M. Croia, A. Del Dotto, M. Ferrario, F. Filippi, A. Gallo, A. Giribono, R. Pompili, S. Romeo, J. Scifo, C. Vaccarezza, F. Villa
INFN/LNF, Frascati, Italy
A.S. Alexandrova, R. Torres, C.P. Welsch, J. Wolfenden
The University of Liverpool, Liverpool, United Kingdom
A.S. Alexandrova, A. Beaton, J.A. Clarke, A.F. Habib, T. Heinemann, B. Hidding, P. Scherkl, N. Thompson, R. Torres, D. Ullmann, C.P. Welsch, S.M. Wiggins, J. Wolfenden, G.X. Xia
Cockcroft Institute, Warrington, Cheshire, United Kingdom
N.E. Andreev, D. Pugacheva
JIHT RAS, Moscow, Russia
N.E. Andreev, D. Pugacheva
MIPT, Dolgoprudniy, Moscow Region, Russia
I.A. Andriyash, M.-E. Couprie, A. Ghaith, D. Oumbarek Espinos
SOLEIL, Gif-sur-Yvette, France
T. Audet, B. Cros, G. Maynard
CNRS LPGP Univ Paris Sud, Orsay, France
A. Bacci, D. Giove, V. Petrillo, A.R. Rossi, L. Serafini
INFN-Milano, Milano, Italy
I.F. Barna, M.A. Pocsai
Wigner Research Centre for Physics, Institute for Particle and Nuclear Physics, Budapest, Hungary
A. Beaton, A.F. Habib, T. Heinemann, B. Hidding, D.A. Jaroszynski, G.G. Manahan, P. Scherkl, Z.M. Sheng, D. Ullmann, S.M. Wiggins
USTRAT/SUPA, Glasgow, United Kingdom
A. Beck, F. Massimo, A. Specka
LLR, Palaiseau, France
A. Beluze, F. Mathieu, D.N. Papadopoulos
LULI, Palaiseau, France
A. Bernhard, E. Bründermann, A.-S. Müller
KIT, Karlsruhe, Germany
S. Bielawski, E. Roussel, C. Szwaj
PhLAM/CERLA, Villeneuve d’Ascq, France
F. Brandi, G. Bussolino, L.A. Gizzi, P. Koester, L. Labate, B. Patrizi, G. Toci, P. Tomassini, M. Vannini
INO-CNR, Pisa, Italy
M.H. Bussmann, A. Irman, U. Schramm
HZDR, Dresden, Germany
M. Büscher, A. Lehrach
FZJ, Jülich, Germany
A. Chancé, P.A.P. Nghiem, C. Simon
CEA-IRFU, Gif-sur-Yvette, France
M. Chen, Z.M. Sheng
Shanghai Jiao Tong University, Shanghai, People’s Republic of China
A. Cianchi
Università di Roma II Tor Vergata, Roma, Italy
A. Cianchi
INFN-Roma II, Roma, Italy
J.A. Clarke, N. Thompson
STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom
J. Cole, S.M. Hooker, M.J.V. Streeter, R. Walczak
JAI, Oxford, United Kingdom
P.A. Crump, M. Huebner
FBH, Berlin, Germany
G. Dattoli, F. Nguyen
ENEA C.R. Frascati, Frascati (Roma), Italy
N. Delerue, K. Wang
LAL, Orsay, France
J.M. Dias, R.A. Fonseca, J.L. Martins, L.O. Silva, T. Silva, U. Sinha, J.M. Vieira
IPFN, Lisbon, Portugal
R. Fedele, G. Fiore, D. Terzani
UniNa, Napoli, Italy
A. Ferran Pousa, T. Heinemann, V. Libov
University of Hamburg, Hamburg, Germany
M. Galimberti, P.D. Mason, R. Pattathil, D. Symes
STFC/RAL, Chilton, Didcot, Oxon, United Kingdom
L.A. Gizzi, L. Labate
INFN-Pisa, Pisa, Italy
F.J. Grüner, A.R. Maier
CFEL, Hamburg, Germany
F.J. Grüner, O.S. Karger, A.R. Maier
University of Hamburg, Institut für Experimentalphysik, Hamburg, Germany
C. Haefner, C. Siders
LLNL, Livermore, California, USA
B.J. Holzer
CERN, Geneva, Switzerland
S.M. Hooker
University of Oxford, Oxford, United Kingdom
T. Hosokai
ISIR, Osaka, Japan
C. Joshi
UCLA, Los Angeles, California, USA
M. Kaluza
IOQ, Jena, Germany
M. Kaluza
HIJ, Jena, Germany
M. Kando
JAEA/Kansai, Kyoto, Japan
S. Karsch
LMU, Garching, Germany
E. Khazanov, I. Kostyukov
IAP/RAS, Nizhny Novgorod, Russia
D. Khikhlukha, D. Kocon, G. Korn, K.O. Kruchinin, A.Y. Molodozhentsev, L. Pribyl
ELI-BEAMS, Prague, Czech Republic
O.S. Kononenko, A. Lifschitz
LOA, Palaiseau, France
C. Le Blanc, Z. Mazzotta
Ecole Polytechnique, Palaiseau, France
X. Li
DESY Zeuthen, Zeuthen, Germany
V. Litvinenko
BNL, Upton, Long Island, New York, USA
V. Litvinenko
Stony Brook University, Stony Brook, USA
W. Lu
TUB, Beijing, People’s Republic of China
O. Lundh
Lund University, Lund, Sweden
V. Malka
Weizmann Institute of Science, Physics, Rehovot, Israel
S.P.D. Mangles, Z. Najmudin, A.A. Sahai
Imperial College of Science and Technology, Department of Physics, London, United Kingdom
A. Mostacci
INFN-Roma, Roma, Italy
A. Mostacci
Sapienza University of Rome, Rome, Italy
C.D. Murphy
York University, Heslington, York, United Kingdom
V. Petrillo
Universita’ degli Studi di Milano, Milano, Italy
M. Rossetti Conti
Universita’ degli Studi di Milano & INFN, Milano, Italy
G. Sarri
Queen’s University of Belfast, Belfast, Northern Ireland, United Kingdom
C.B. Schroeder
LBNL, Berkeley, California, USA
C.-G. Wahlstrom
Lund Institute of Technology (LTH), Lund University, Lund, Sweden
R. Walczak
Oxford University, Physics Department, Oxford, Oxon, United Kingdom
G.X. Xia
UMAN, Manchester, United Kingdom
M. Yabashi
RIKEN SPring-8 Center, Sayo-cho, Sayo-gun, Hyogo, Japan
A. Zigler
The Hebrew University of Jerusalem, The Racah Institute of Physics, Jerusalem, Israel

Funding: This work was supported by the European Union’s Horizon 2020 Research and Innovation programme under grant agreement No. 653782.
The Horizon 2020 Project EuPRAXIA (European Plasma Research Accelerator with eXcellence In Applications) is producing a conceptual design report for a highly compact and cost-effective European facility with multi-GeV electron beams accelerated using plasmas. EuPRAXIA will be set up as a distributed Open Innovation platform with two construction sites, one with a focus on beam-driven plasma acceleration (PWFA) and another site with a focus on laser-driven plasma acceleration (LWFA). User areas at both sites will provide access to FEL pilot experiments, positron generation and acceleration, compact radiation sources, and test beams for HEP detector development. Support centres in four different countries will complement the pan-European implementation of this infrastructure.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPGW026

About •

paper received ※ 26 April 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)