Author: Zvyagintsev, V.
Paper Title Page
THPAL112 RF Matching Circuit for CANREB RFQ 3902
 
  • T. Au, B. Barquest, J.J. Keir, V. Zvyagintsev
    TRIUMF, Vancouver, Canada
  
  A RF matching circuit has been developed to provide two phase RF voltage of 1.2 kVpp at 3 MHz and 6 MHz for the CANREB RFQ structure with an equivalent capacitive load of 300 pF. The RF matching circuit utilizes pi-network with two phase transformer. Beyond RF drive the CANREB structure requires pulse DC bias with amplitude up to 500 V. Results of development and testing of RF matching circuit and filters are presented in this paper.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPAL112  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPAL115 The Design of 1.1 MW RF Dummy Load for the RF System of 520 MeV Cyclotron 3911
 
  • N.V. Avreline, Y. Bylinskii, B. Jakovljevic, Y. Ma, V. Zvyagintsev
    TRIUMF, Vancouver, Canada
  
  The RF System of 520-MeV Cyclotron is operating at 23 MHz with 1 MW CW RF power. The RF dummy load is required to troubleshoot and tune the RF amplifier. The RF system is being constantly improved and the future goal is to increase cyclotron's beam current up to 400 μA, which requires increasing the RF amplifier's power. As a part of this goal, a new RF dummy load was designed.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPAL115  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPAL116 Development and Installation of the CANREB RFQ Buncher at TRIUMF 3914
 
  • B. Barquest, F. Ames, T. Au, L. Graham, M.R. Pearson, V. Zvyagintsev
    TRIUMF, Vancouver, Canada
  • J. Bale, J. Dilling, R. Kruecken, Y. Lan
    UBC & TRIUMF, Vancouver, British Columbia, Canada
  • G. Gwinner
    University of Manitoba, Manitoba, Canada
  • N. Janzen, R.A. Simpson
    UW/Physics, Waterloo, Ontario, Canada
  • R. Kanungo
    Saint Mary's University, Halifax, Canada
  
  Funding: TRIUMF receives federal funding via the National Research Council of Canada. CANREB is funded by the Canada Foundation for Innovation (CFI), the Provinces NS, MB and TRIUMF.
Pure, intense rare isotope beams at a wide range of energies are crucial to the nuclear science programs at TRIUMF. The CANREB project will deliver a high resolution spectrometer (HRS) for beam purification, and a charge breeding system consisting of a radiofrequency quadrupole (RFQ) beam cooler and buncher, an electron beam ion source (EBIS), and a Nier-type spectrometer to prepare the beam for post-acceleration. Bunching the beam prior to charge breeding will significantly enhance the efficiency of the EBIS. The RFQ buncher will accept continuous §I{60}{keV} rare isotope beams from the ARIEL or ISAC production targets and efficiently deliver low emittance bunched beams. A pulsed drift tube (PDT) will adjust the energy of the bunched beam for injection into the EBIS to match the acceptance of the post-accelerating RFQ. Ion optical simulations were carried out to inform the design of the RFQ buncher and PDT. Simulations indicate that delivery of up to 107~ions per bunch with high efficiency is possible. Experience with previous beam bunchers was also brought to bear in the design effort. Installation of the RFQ is under way, and tests with offline beam are expected to be performed in late 2018. 		 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPAL116  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPAL123 Fabrication and Test of β=0.3 325MHz Balloon Single Spoke Resonator 3934
 
  • Z.Y. Yao, J.J. Keir, D. Kishi, D. Lang, R.E. Laxdal, H.L. Liu, Y. Ma, B. Matheson, B.S. Waraich, Q. Zheng, V. Zvyagintsev
    TRIUMF, Vancouver, Canada
  
  A novel balloon variant of the single spoke resonator (SSR) has been designed, fabricated and tested at TRIUMF. The cavity is the β=0.3 325 MHz SSR1 prototype for the Rare Isotope Science Project (RISP) in Korea. The balloon variant is specifically designed to reduce the likelihood of multipacting barriers near the operating point. A systematic multipacting study led to a novel geometry, a spherical cavity with re-entrant irises plus a spoke. The balloon cavity provides competitive RF parameters and a robust mechanical structure. Cold tests demonstrated the principle of the balloon concept. The fabrication experience and the preliminary test results will be reported in this paper.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPAL123  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPMK090 First RF Test Results of Two-Cavities Accelerating Cryomodule for ARIEL eLinac at TRIUMF 4512
 
  • Y. Ma, Z.T. Ang, K. Fong, J.J. Keir, D. Kishi, D. Lang, R.E. Laxdal, R.R. Nagimov, B.S. Waraich, Z.Y. Yao, V. Zvyagintsev
    TRIUMF, Vancouver, Canada
  
  The Advanced Rare Isotope Laboratory (ARIEL) pro-ject requires a 50 MeV, 10 mA continuous-wave (CW) electron linear accelerator (e-Linac) as a driver accelera-tor. Now the stage of the 30MeV portion of the e-Linac is under commissioning which includes an injector cry-omodule(ICM) and the 1st accelerator cryomodules (ACM1) with two cavities configuration. A single 290kW klystron is used to feed the two ACM1 cavities in vector sum closed-loop control. In this paper the initial commis-sioning results of the ACM1 RF system will be present.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPMK090  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)