IPAC2018 - List of Authors (Hannon, F.E.)

Paper	Title	Page
MOPMK015	Development of a Bunched-Beam Electron Cooler for the Jefferson Lab Electron-Ion Collider	382
	S.V. Benson, Y.S. Derbenev, D. Douglas, F.E. Hannon, A. Hutton, R. Li, R.A. Rimmer, Y. Roblin, C. Tennant, H. Wang, H. Zhang, Y. Zhang JLab, Newport News, Virginia, USA
	Funding: Authored by Jefferson Science Associates, LLC under U.S.DOE Contract No. DE-AC05-06OR23177. Jefferson Lab is in the process of designing an electron-ion collider with unprecedented luminosity at a 65 GeV center-of-mass energy. This luminosity relies on ion cooling in both the booster and the storage ring of the accelerator complex. The cooling in the booster will use a conventional DC cooler similar to the one at COSY. The high-energy storage ring, operating at a momentum of up to 100 GeV/nucleon, requires novel use of bunched-beam cooling. We will present a new design for a Circulator Cooler Ring for bunched-beam electron cooling. This requires the generation and transport of very high-charge magnetized bunches, acceleration of the bunches in an energy recovery linac, and transfer of these bunches to a circulating ring that passes the bunches 11 times through the proton or ion beam inside cooling solenoids. This design requires the suppression of the effects of space charge and coherent synchrotron radiation using shielding and RF compensation.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-MOPMK015
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPAK071	Simulation Study of the Magnetized Electron Beam	3395
SUSPF086	use link to see paper's listing under its alternate paper code
	S.A.K. Wijethunga, J.R. Delayen, G.A. Krafft ODU, Norfolk, Virginia, USA J. F. Benesch, F.E. Hannon, G.A. Krafft, M.A. Mamun, M. Poelker, R. Suleiman JLab, Newport News, Virginia, USA
	Funding: This work is supported by the Department of Energy, Laboratory Directed Research and Development funding, under contract DE-AC05-06OR23177 Electron cooling of the ion beam plays an important role in electron ion colliders to obtain the required high luminosity. This cooling efficiency can be enhanced by using a magnetized electron beam, where the cooling process occurs inside a solenoid field. This paper compares the predictions of ASTRA and GPT simulations to measurements made using a DC high voltage photogun producing magnetized electron beam, related to beam size and rotation angles as a function of the photogun magnetizing solenoid and other parameters.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPAK071
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPAL144	952.6 MHz SRF Cavity Development for JLEIC	3982
	R.A. Rimmer, W.A. Clemens, F. Fors, J. Guo, F.E. Hannon, J. Henry, F. Marhauser, L. Turlington, H. Wang, S. Wang JLab, Newport News, Virginia, USA
	Funding: Authored by Jefferson Science Associates, LLC under U.S. DOE Contract No. DE-AC05-06OR23177 JLab is developing new SRF cavity designs at 952.6 MHz for the proposed Jefferson Lab Electron-Ion Collider (JLEIC). New cavities will be required for the ion ring, cooler ERL and booster and eventually for an upgrade of the electron ring to allow the highest possible bunch collision rate. The challenges include the need for high fundamental mode power couplers and strong HOM damping, with high HOM power capability. Initial focus is on the cooler ERL 5-cell cavity as this is a critical component for the strong, high energy, bunched-beam cooling concept. 1-cell and 5-cell Nb prototype cavities have been designed and fabricated. Details concerning the cavity fabrication and test results will be presented.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPAL144
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPMK105	PERLE - Lattice Design and Beam Dynamics Studies	4556
	S.A. Bogacz, D. Douglas, F.E. Hannon, A. Hutton, F. Marhauser, R.A. Rimmer, Y. Roblin, C. Tennant JLab, Newport News, Virginia, USA D. Angal-Kalinin, J.W. McKenzie, B.L. Militsyn, P.H. Williams Cockcroft Institute, Warrington, Cheshire, United Kingdom G. Arduini, O.S. Brüning, R. Calaga, K.M. Dr. Schirm, F. Gerigk, B.J. Holzer, E. Jensen, A. Milanese, E. Montesinos, D. Pellegrini, P.A. Thonet, A. Valloni CERN, Geneva, Switzerland S. Bousson, D. Longuevergne, G. Olivier, G. Olry IPN, Orsay, France I. Chaikovska, W. Kaabi, A. Stocchi, C. Vallerand LAL, Orsay, France B. Hounsell, M. Klein, U.K. Klein, P. Kostka, C.P. Welsch The University of Liverpool, Liverpool, United Kingdom E.B. Levichev, Yu.A. Pupkov BINP SB RAS, Novosibirsk, Russia
	Funding: Work has been authored by Jefferson Science Associates, LLC under Contract No. DE-AC05-06OR23177 with the U.S. Department of Energy. PERLE (Powerful ERL for Experiments) is a novel ERL test facility, initially proposed to validate choices for a 60 GeV ERL foreseen in the design of the LHeC and the FCC-eh. Its main thrust is to probe high current, CW, multi-pass operation with superconducting cavities at 802 MHz (and perhaps testing other frequencies of interest). With very high virtual beam power (~ 10 MW), PERLE offers an opportunity for controllable study of every beam dynamic effect of interest in the next generation of ERL design; becoming a ‘stepping stone' between present state-of-art 1 MW ERLs and future 100 MW scale applications. PERLE design features Flexible Momentum Compaction lattice architecture for six vertically stacked return arcs and a high-current, 6 MeV, photo-injector. With only one pair of 4 cavity cryomodules, 400 MeV beam energy can be reached in 3 re-circulation passes, with beam currents in excess of 15 mA. The beam is decelerated in 3 consecutive passes back to the injection energy, transferring virtually stored energy back to the RF. This unique facility will serve as a test-bed for high current ERL technologies, as well as a user facility in low energy electron and photon physics.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPMK105
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPMK107	Design of a High Charge, Low Energy, Magnetized Electron Injector	4564
	F.E. Hannon JLab, Newport News, Virginia, USA
	Funding: Authored by Jefferson Science Associates, LLC under U.S. DOE Contract No. DE-AC05-06OR23177. Simulations of a magnetized injector for the bunched-beam electron cooler ring, as part of the Jefferson Lab Electron Ion Collider (JLEIC) are presented. A challenge of such an injector is in generating a magnetized, 3.2nC electron bunch at low energy and preserving the angular momentum so it can subsequently be merged into the cooler ring and transported to the cooling solenoid without degradation. The design of the proposed injector and the effect it has on the beam are discussed in detail.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPMK107
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPMK108	Production of Magnetized Electron Beam from a DC High Voltage Photogun	4567
	M.A. Mamun, P.A. Adderley, J. F. Benesch, D.B. Bullard, J.R. Delayen, J.M. Grames, J. Guo, F.E. Hannon, J. Hansknecht, C. Hernandez-Garcia, R. Kazimi, G.A. Krafft, M. Poelker, R. Suleiman, M.G. Tiefenback, Y.W. Wang, S. Zhang JLab, Newport News, Virginia, USA S.A.K. Wijethunga ODU, Norfolk, Virginia, USA
	Funding: This work is supported by the Department of Energy, Laboratory Directed Research and Development funding, under contract DE-AC05-06OR23177 Bunched-beam electron cooling is a key feature of all proposed designs of the future electron-ion collider, and a requirement for achieving the highest promised collision luminosity. At the Jefferson Lab Electron Ion Collider (JLEIC), fast cooling of ion beams will be accomplished via so-called 'magnetized cooling' implemented using a recirculator ring that employs an energy recovery linac. In this contribution, we describe the production of magnetized electron beam using a compact 300 kV DC high voltage photogun with an inverted insulator geometry, and using alkali-antimonide photocathodes. Beam magnetization was assessed using a modest diagnostic beamline that includes YAG view screens used to measure the rotation of the electron beamlet passing through a narrow upstream aperture. Magnetization results are presented for different gun bias voltages and for different laser spot sizes at the photocathode, using 532 nm lasers with DC and RF time structure. Photocathode lifetime was measured at currents up to 4.5 mA, with and without beam magnetization.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPMK108
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPMK110	300 kV DC High Voltage Photogun with Inverted Insulator Geometry and CsK2sb Photocathode	4571
SUSPF028	use link to see paper's listing under its alternate paper code
	Y.W. Wang, P.A. Adderley, J. F. Benesch, D.B. Bullard, J.M. Grames, F.E. Hannon, J. Hansknecht, C. Hernandez-Garcia, R. Kazimi, G.A. Krafft, G.A. Krafft, M.A. Mamun, G.G. Palacios Serrano, M. Poelker, R. Suleiman, M.G. Tiefenback, S. Zhang JLab, Newport News, Virginia, USA G.A. Krafft, S.A.K. Wijethunga ODU, Norfolk, Virginia, USA
	Funding: This work is supported by the Department of Energy, Laboratory Directed Research and Development funding, under contract DE-AC05-06OR23177 A compact DC high voltage photogun with inverted-insulator geometry was designed, built and operated reliably at 300 kV bias voltage using alkali-antimonide photocathodes. This presentation describes key electrostatic design features of the photogun with accompanying emittance measurements obtained across the entire photocathode surface that speak to field non-uniformity within the cathode/anode gap. A summary of initial photocathode lifetime measurements at beam currents up to 4.5 mA is also presented.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPMK110
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Development of a Bunched-Beam Electron Cooler for the Jefferson Lab Electron-Ion Collider

382

S.V. Benson, Y.S. Derbenev, D. Douglas, F.E. Hannon, A. Hutton, R. Li, R.A. Rimmer, Y. Roblin, C. Tennant, H. Wang, H. Zhang, Y. Zhang
JLab, Newport News, Virginia, USA

Funding: Authored by Jefferson Science Associates, LLC under U.S.DOE Contract No. DE-AC05-06OR23177.
Jefferson Lab is in the process of designing an electron-ion collider with unprecedented luminosity at a 65 GeV center-of-mass energy. This luminosity relies on ion cooling in both the booster and the storage ring of the accelerator complex. The cooling in the booster will use a conventional DC cooler similar to the one at COSY. The high-energy storage ring, operating at a momentum of up to 100 GeV/nucleon, requires novel use of bunched-beam cooling. We will present a new design for a Circulator Cooler Ring for bunched-beam electron cooling. This requires the generation and transport of very high-charge magnetized bunches, acceleration of the bunches in an energy recovery linac, and transfer of these bunches to a circulating ring that passes the bunches 11 times through the proton or ion beam inside cooling solenoids. This design requires the suppression of the effects of space charge and coherent synchrotron radiation using shielding and RF compensation.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-MOPMK015

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPAK071

Simulation Study of the Magnetized Electron Beam

3395

SUSPF086

use link to see paper's listing under its alternate paper code

S.A.K. Wijethunga, J.R. Delayen, G.A. Krafft
ODU, Norfolk, Virginia, USA
J. F. Benesch, F.E. Hannon, G.A. Krafft, M.A. Mamun, M. Poelker, R. Suleiman
JLab, Newport News, Virginia, USA

Funding: This work is supported by the Department of Energy, Laboratory Directed Research and Development funding, under contract DE-AC05-06OR23177
Electron cooling of the ion beam plays an important role in electron ion colliders to obtain the required high luminosity. This cooling efficiency can be enhanced by using a magnetized electron beam, where the cooling process occurs inside a solenoid field. This paper compares the predictions of ASTRA and GPT simulations to measurements made using a DC high voltage photogun producing magnetized electron beam, related to beam size and rotation angles as a function of the photogun magnetizing solenoid and other parameters.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPAK071

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPAL144

952.6 MHz SRF Cavity Development for JLEIC

3982

R.A. Rimmer, W.A. Clemens, F. Fors, J. Guo, F.E. Hannon, J. Henry, F. Marhauser, L. Turlington, H. Wang, S. Wang
JLab, Newport News, Virginia, USA

Funding: Authored by Jefferson Science Associates, LLC under U.S. DOE Contract No. DE-AC05-06OR23177
JLab is developing new SRF cavity designs at 952.6 MHz for the proposed Jefferson Lab Electron-Ion Collider (JLEIC). New cavities will be required for the ion ring, cooler ERL and booster and eventually for an upgrade of the electron ring to allow the highest possible bunch collision rate. The challenges include the need for high fundamental mode power couplers and strong HOM damping, with high HOM power capability. Initial focus is on the cooler ERL 5-cell cavity as this is a critical component for the strong, high energy, bunched-beam cooling concept. 1-cell and 5-cell Nb prototype cavities have been designed and fabricated. Details concerning the cavity fabrication and test results will be presented.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPAL144

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPMK105

PERLE - Lattice Design and Beam Dynamics Studies

4556

S.A. Bogacz, D. Douglas, F.E. Hannon, A. Hutton, F. Marhauser, R.A. Rimmer, Y. Roblin, C. Tennant
JLab, Newport News, Virginia, USA
D. Angal-Kalinin, J.W. McKenzie, B.L. Militsyn, P.H. Williams
Cockcroft Institute, Warrington, Cheshire, United Kingdom
G. Arduini, O.S. Brüning, R. Calaga, K.M. Dr. Schirm, F. Gerigk, B.J. Holzer, E. Jensen, A. Milanese, E. Montesinos, D. Pellegrini, P.A. Thonet, A. Valloni
CERN, Geneva, Switzerland
S. Bousson, D. Longuevergne, G. Olivier, G. Olry
IPN, Orsay, France
I. Chaikovska, W. Kaabi, A. Stocchi, C. Vallerand
LAL, Orsay, France
B. Hounsell, M. Klein, U.K. Klein, P. Kostka, C.P. Welsch
The University of Liverpool, Liverpool, United Kingdom
E.B. Levichev, Yu.A. Pupkov
BINP SB RAS, Novosibirsk, Russia

Funding: Work has been authored by Jefferson Science Associates, LLC under Contract No. DE-AC05-06OR23177 with the U.S. Department of Energy.
PERLE (Powerful ERL for Experiments) is a novel ERL test facility, initially proposed to validate choices for a 60 GeV ERL foreseen in the design of the LHeC and the FCC-eh. Its main thrust is to probe high current, CW, multi-pass operation with superconducting cavities at 802 MHz (and perhaps testing other frequencies of interest). With very high virtual beam power (~ 10 MW), PERLE offers an opportunity for controllable study of every beam dynamic effect of interest in the next generation of ERL design; becoming a ‘stepping stone' between present state-of-art 1 MW ERLs and future 100 MW scale applications. PERLE design features Flexible Momentum Compaction lattice architecture for six vertically stacked return arcs and a high-current, 6 MeV, photo-injector. With only one pair of 4 cavity cryomodules, 400 MeV beam energy can be reached in 3 re-circulation passes, with beam currents in excess of 15 mA. The beam is decelerated in 3 consecutive passes back to the injection energy, transferring virtually stored energy back to the RF. This unique facility will serve as a test-bed for high current ERL technologies, as well as a user facility in low energy electron and photon physics.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPMK105

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPMK107

Design of a High Charge, Low Energy, Magnetized Electron Injector

4564

F.E. Hannon
JLab, Newport News, Virginia, USA

Funding: Authored by Jefferson Science Associates, LLC under U.S. DOE Contract No. DE-AC05-06OR23177.
Simulations of a magnetized injector for the bunched-beam electron cooler ring, as part of the Jefferson Lab Electron Ion Collider (JLEIC) are presented. A challenge of such an injector is in generating a magnetized, 3.2nC electron bunch at low energy and preserving the angular momentum so it can subsequently be merged into the cooler ring and transported to the cooling solenoid without degradation. The design of the proposed injector and the effect it has on the beam are discussed in detail.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPMK107

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPMK108

Production of Magnetized Electron Beam from a DC High Voltage Photogun

4567

M.A. Mamun, P.A. Adderley, J. F. Benesch, D.B. Bullard, J.R. Delayen, J.M. Grames, J. Guo, F.E. Hannon, J. Hansknecht, C. Hernandez-Garcia, R. Kazimi, G.A. Krafft, M. Poelker, R. Suleiman, M.G. Tiefenback, Y.W. Wang, S. Zhang
JLab, Newport News, Virginia, USA
S.A.K. Wijethunga
ODU, Norfolk, Virginia, USA

Funding: This work is supported by the Department of Energy, Laboratory Directed Research and Development funding, under contract DE-AC05-06OR23177
Bunched-beam electron cooling is a key feature of all proposed designs of the future electron-ion collider, and a requirement for achieving the highest promised collision luminosity. At the Jefferson Lab Electron Ion Collider (JLEIC), fast cooling of ion beams will be accomplished via so-called 'magnetized cooling' implemented using a recirculator ring that employs an energy recovery linac. In this contribution, we describe the production of magnetized electron beam using a compact 300 kV DC high voltage photogun with an inverted insulator geometry, and using alkali-antimonide photocathodes. Beam magnetization was assessed using a modest diagnostic beamline that includes YAG view screens used to measure the rotation of the electron beamlet passing through a narrow upstream aperture. Magnetization results are presented for different gun bias voltages and for different laser spot sizes at the photocathode, using 532 nm lasers with DC and RF time structure. Photocathode lifetime was measured at currents up to 4.5 mA, with and without beam magnetization.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPMK108

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPMK110

300 kV DC High Voltage Photogun with Inverted Insulator Geometry and CsK2sb Photocathode

4571

SUSPF028

use link to see paper's listing under its alternate paper code

Y.W. Wang, P.A. Adderley, J. F. Benesch, D.B. Bullard, J.M. Grames, F.E. Hannon, J. Hansknecht, C. Hernandez-Garcia, R. Kazimi, G.A. Krafft, G.A. Krafft, M.A. Mamun, G.G. Palacios Serrano, M. Poelker, R. Suleiman, M.G. Tiefenback, S. Zhang
JLab, Newport News, Virginia, USA
G.A. Krafft, S.A.K. Wijethunga
ODU, Norfolk, Virginia, USA

Funding: This work is supported by the Department of Energy, Laboratory Directed Research and Development funding, under contract DE-AC05-06OR23177
A compact DC high voltage photogun with inverted-insulator geometry was designed, built and operated reliably at 300 kV bias voltage using alkali-antimonide photocathodes. This presentation describes key electrostatic design features of the photogun with accompanying emittance measurements obtained across the entire photocathode surface that speak to field non-uniformity within the cathode/anode gap. A summary of initial photocathode lifetime measurements at beam currents up to 4.5 mA is also presented.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPMK110

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)