IPAC2017 - List of Authors (Ohnishi, Y.)

Paper	Title	Page
MOPIK076	Optimization of Dynamic Aperture with Constraints on Linear Chromaticity	705
	H. Sugimoto, H. Koiso, A. Morita, Y. Ohnishi, K. Oide, D. Zhou KEK, Ibaraki, Japan
	This paper presents numerical technique to optimize dynamic aperture with constraints on linear chromaticity of optical functions. By solving a set of linear equations at each iteration step of dynamic aperture optimization, the linear chromaticity is kept unchanged. The variable range of tuning knobs is taken into account in order to make the technique applicable to practical use. Numerical simulations assuming the SuperKEKB design lattice are performed, and it is demonstrated that the dynamic aperture obtained with the presented scheme is almost comparable to that without constraints. Luminosity simulations assuming weak-strong model show that the constraints lead to improvements of luminosity performance.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-MOPIK076
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPAB004	Progress of 7-GeV SuperKEKB Injector Linac Upgrade and Commissioning	1300
	K. Furukawa, M. Akemoto, D.A. Arakawa, Y. Arakida, H. Ego, A. Enomoto, Y. Enomoto, S. Fukuda, Y. Funahashi, T. Higo, H. Honma, N. Iida, M. Ikeda, H. Kaji, K. Kakihara, T. Kamitani, H. Katagiri, M. Kawamura, M. Kurashina, S. Matsumoto, T. Matsumoto, H. Matsushita, S. Michizono, K. Mikawa, T. Miura, F. Miyahara, H. Nakajima, K. Nakao, T. Natsui, M. Nishida, Y. Ogawa, Y. Ohnishi, S. Ohsawa, F. Qiu, I. Satake, D. Satoh, M. Satoh, Y. Seimiya, A. Shirakawa, H. Sugimoto, H. Sugimura, T. Suwada, T. Takatomi, T. Takenaka, M. Tanaka, N. Toge, Y. Yano, K. Yokoyama, M. Yoshida, R. Zhang, X. Zhou KEK, Ibaraki, Japan
	KEK injector linac has delivered electrons and positrons for particle physics and photon science experiments for more than 30 years. It is being upgraded for the SuperKEKB project, which aims at a 40-fold increase in luminosity over the previous project KEKB, in order to increase our understanding of new physics beyond the standard model of elementary particle physics. SuperKEKB asymmetric electron and positron collider with its extremely high luminosity requires a high current, low emittance and low energy spread injection beam from the injector. Electron beams will be generated by a new type of RF gun, that will provide a much higher beam current to correspond to a large stored beam current and a short lifetime in the ring. The positron source is another major challenge that enhances the positron bunch intensity from 1 to 4 nC by increasing the positron capture efficiency, and the positron beam emittance is reduced from 2000 micron to 20 micron in the vertical plane by introducing a damping ring, followed by the bunch compressor and energy compressor. The recent status of the upgrade and beam commissioning is reported.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-TUPAB004
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPIK006	Cancellation of the Leak Field from Lambertson Septum for the Beam Abort System in the SuperKEKB	2918
	N. Iida, M. Kikuchi, K. Kodama, T. Mimashi, T. Mori, Y. Ohnishi, K. Oide, H. Sugimoto, M. Tawada KEK, Ibaraki, Japan
	The first commissioning of SuperKEKB, Phase 1, was performed from February 2016 for five months. A Lambertson septum magnet is utilized to vertically extract the aborted beam, kicked by the horizontal abort kickers upstream into a beam dump. This magnet creates unexpected leak field with a non-negligible skew quadrupole component to the stored beam. Two kinds of skew quadrupole magnets are installed on both sides of the Lambertson septum. One is additional skew windings on the sextupole magnet, and the other is a skew quadrupole magnet with permanent magnets. This paper will report that the cancellations of the leak fields was successful and useful for optics correction.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-WEPIK006
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPIK007	Optics Design and Observation for the Beam Abort System in SuperKEKB HER	2922
	N. Iida, K. Egawa, Y. Enomoto, Y. Funakoshi, M. Kikuchi, T. Mimashi, Y. Ohnishi, K. Oide, Y. Suetsugu KEK, Ibaraki, Japan
	In the first commissioning of SuperKEKB, which is 'Phase 1', the new abort system is tested in the High Energy Ring (HER). There is a risk that aborted beams with low emittance and high current may destroy the window for extraction from beam pipe. In order to enlarge the aborted beam at the window, quadrupole field is applied only for the aborted beam. In the Low Energy Ring (LER), quadrupole pulsed magnets will be installed to enlarge the aborted beam, and in the HER, a pair of identical sextupole magnets is installed between the abort kickers and the extraction window. These sextrupole magnets are connected by I or 'I transformation to cancel the geometrical nonlinearity for the stored beam in the ring. This paper will report the optics design for the abort system of the HER as well as the observation of the aborted beam.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-WEPIK007
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPVA055	Pre Orbit Correction Based on Tunnel Level Measurement in SuperKEKB	3385
	A. Morita, H. Koiso, Y. Ohnishi, H. Sugimoto KEK, Ibaraki, Japan
	The SuperKEKB accelerator tunnel has about 30mm displacement in the vertical direction. From the result of optics correction simulation with the tunnel displacement, it was decided that the beamline components align against the smoothed line of the measured tunnel level in order to save the alignment cost and time. In order to compensate the large tunnel displacement, the pre orbit correction based on the tunnel level measurement is applied at the beginning of the phase-1 commissioning, and the beam circulation is achieved with the small number of magnet adjustments. We report the result of the pre orbit correction.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-WEPVA055
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPVA012	Transverse Impedance Measurement in SuperKEKB	4442
	N. Kuroo UTTAC, Tsukuba, Ibaraki, Japan T. Ishibashi, T. Mimashi, K. Ohmi, Y. Ohnishi, K. Shibata, Y. Suetsugu, S. Terui, M. Tobiyama, D. Zhou KEK, Ibaraki, Japan
	In KEK(Japan), SuperKEKB project is progressing toward upgrade. This project aims improvement luminosity (8×10³⁵ cm^-2s- 1) which is 40 times of the performance of the KEKB accelerator. In Phase 1 of this project, a performance test as storage ring was carried out. Understanding of ring Impedance/wake is an important subject in phase I. Measurement of Head Tail Damping using Turn by Turn monitor was performed to evaluate impedance/wake. Betatron motion is excited by kicker and its damping is measured for several parameters sets of bunch current and chromaticity in both HER and LER. The wake field was calculated from the decrement of betatron amplitude. We present the wake field which is cross-checked with tune shift based on the current dependence.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-THPVA012
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Optimization of Dynamic Aperture with Constraints on Linear Chromaticity

705

H. Sugimoto, H. Koiso, A. Morita, Y. Ohnishi, K. Oide, D. Zhou
KEK, Ibaraki, Japan

This paper presents numerical technique to optimize dynamic aperture with constraints on linear chromaticity of optical functions. By solving a set of linear equations at each iteration step of dynamic aperture optimization, the linear chromaticity is kept unchanged. The variable range of tuning knobs is taken into account in order to make the technique applicable to practical use. Numerical simulations assuming the SuperKEKB design lattice are performed, and it is demonstrated that the dynamic aperture obtained with the presented scheme is almost comparable to that without constraints. Luminosity simulations assuming weak-strong model show that the constraints lead to improvements of luminosity performance.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-MOPIK076

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPAB004

Progress of 7-GeV SuperKEKB Injector Linac Upgrade and Commissioning

1300

K. Furukawa, M. Akemoto, D.A. Arakawa, Y. Arakida, H. Ego, A. Enomoto, Y. Enomoto, S. Fukuda, Y. Funahashi, T. Higo, H. Honma, N. Iida, M. Ikeda, H. Kaji, K. Kakihara, T. Kamitani, H. Katagiri, M. Kawamura, M. Kurashina, S. Matsumoto, T. Matsumoto, H. Matsushita, S. Michizono, K. Mikawa, T. Miura, F. Miyahara, H. Nakajima, K. Nakao, T. Natsui, M. Nishida, Y. Ogawa, Y. Ohnishi, S. Ohsawa, F. Qiu, I. Satake, D. Satoh, M. Satoh, Y. Seimiya, A. Shirakawa, H. Sugimoto, H. Sugimura, T. Suwada, T. Takatomi, T. Takenaka, M. Tanaka, N. Toge, Y. Yano, K. Yokoyama, M. Yoshida, R. Zhang, X. Zhou
KEK, Ibaraki, Japan

KEK injector linac has delivered electrons and positrons for particle physics and photon science experiments for more than 30 years. It is being upgraded for the SuperKEKB project, which aims at a 40-fold increase in luminosity over the previous project KEKB, in order to increase our understanding of new physics beyond the standard model of elementary particle physics. SuperKEKB asymmetric electron and positron collider with its extremely high luminosity requires a high current, low emittance and low energy spread injection beam from the injector. Electron beams will be generated by a new type of RF gun, that will provide a much higher beam current to correspond to a large stored beam current and a short lifetime in the ring. The positron source is another major challenge that enhances the positron bunch intensity from 1 to 4 nC by increasing the positron capture efficiency, and the positron beam emittance is reduced from 2000 micron to 20 micron in the vertical plane by introducing a damping ring, followed by the bunch compressor and energy compressor. The recent status of the upgrade and beam commissioning is reported.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-TUPAB004

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPIK006

Cancellation of the Leak Field from Lambertson Septum for the Beam Abort System in the SuperKEKB

2918

N. Iida, M. Kikuchi, K. Kodama, T. Mimashi, T. Mori, Y. Ohnishi, K. Oide, H. Sugimoto, M. Tawada
KEK, Ibaraki, Japan

The first commissioning of SuperKEKB, Phase 1, was performed from February 2016 for five months. A Lambertson septum magnet is utilized to vertically extract the aborted beam, kicked by the horizontal abort kickers upstream into a beam dump. This magnet creates unexpected leak field with a non-negligible skew quadrupole component to the stored beam. Two kinds of skew quadrupole magnets are installed on both sides of the Lambertson septum. One is additional skew windings on the sextupole magnet, and the other is a skew quadrupole magnet with permanent magnets. This paper will report that the cancellations of the leak fields was successful and useful for optics correction.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-WEPIK006

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPIK007

Optics Design and Observation for the Beam Abort System in SuperKEKB HER

2922

N. Iida, K. Egawa, Y. Enomoto, Y. Funakoshi, M. Kikuchi, T. Mimashi, Y. Ohnishi, K. Oide, Y. Suetsugu
KEK, Ibaraki, Japan

In the first commissioning of SuperKEKB, which is 'Phase 1', the new abort system is tested in the High Energy Ring (HER). There is a risk that aborted beams with low emittance and high current may destroy the window for extraction from beam pipe. In order to enlarge the aborted beam at the window, quadrupole field is applied only for the aborted beam. In the Low Energy Ring (LER), quadrupole pulsed magnets will be installed to enlarge the aborted beam, and in the HER, a pair of identical sextupole magnets is installed between the abort kickers and the extraction window. These sextrupole magnets are connected by I or 'I transformation to cancel the geometrical nonlinearity for the stored beam in the ring. This paper will report the optics design for the abort system of the HER as well as the observation of the aborted beam.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-WEPIK007

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPVA055

Pre Orbit Correction Based on Tunnel Level Measurement in SuperKEKB

3385

A. Morita, H. Koiso, Y. Ohnishi, H. Sugimoto
KEK, Ibaraki, Japan

The SuperKEKB accelerator tunnel has about 30mm displacement in the vertical direction. From the result of optics correction simulation with the tunnel displacement, it was decided that the beamline components align against the smoothed line of the measured tunnel level in order to save the alignment cost and time. In order to compensate the large tunnel displacement, the pre orbit correction based on the tunnel level measurement is applied at the beginning of the phase-1 commissioning, and the beam circulation is achieved with the small number of magnet adjustments. We report the result of the pre orbit correction.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-WEPVA055

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPVA012

Transverse Impedance Measurement in SuperKEKB

4442

N. Kuroo
UTTAC, Tsukuba, Ibaraki, Japan
T. Ishibashi, T. Mimashi, K. Ohmi, Y. Ohnishi, K. Shibata, Y. Suetsugu, S. Terui, M. Tobiyama, D. Zhou
KEK, Ibaraki, Japan

In KEK(Japan), SuperKEKB project is progressing toward upgrade. This project aims improvement luminosity (8×10³⁵ cm^-2s- 1) which is 40 times of the performance of the KEKB accelerator. In Phase 1 of this project, a performance test as storage ring was carried out. Understanding of ring Impedance/wake is an important subject in phase I. Measurement of Head Tail Damping using Turn by Turn monitor was performed to evaluate impedance/wake. Betatron motion is excited by kicker and its damping is measured for several parameters sets of bunch current and chromaticity in both HER and LER. The wake field was calculated from the decrement of betatron amplitude. We present the wake field which is cross-checked with tune shift based on the current dependence.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-THPVA012

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)