Author: Nakazawa, S.
Paper Title Page
WEPVA061 High-Precision Pattern Power Supply of Kicker Magnet for Multi-Beamline Operation at SACLA 3404
 
  • C. Kondo, T. Fukui, T. Hara, T. Inagaki, Y. Otake, H. Tanaka
    RIKEN SPring-8 Center, Sayo-cho, Sayo-gun, Hyogo, Japan
  • K. Fukami
    JASRI/SPring-8, Hyogo-ken, Japan
  • H. Kawaguchi, Y. Kawaguchi
    Nichicon (Kusatsu) Corporation, Shiga, Japan
  • S. Nakazawa
    SES, Hyogo-pref., Japan
 
  At the Japanese XFEL facility SACLA, two XFEL beamlines (BL2 and BL3) and an injection line to the SPring-8 storage ring are switched by a kicker magnet. This multi-beamline operation has been tested since February 2015, however, CSR effects at a dogleg beam transport to BL2 with a deflecting angle of 3 degree currently limit the peak current of the electron beam. In order to suppress and cancel out the CSR effects, new beam optics is introduced for the dogleg in January 2017. In the new optics, a deflecting angle of the first kicker magnet is increased to 1.5 degree, which is three times larger than that of the old optics. To drive the kicker magnet, a high-power pattern power supply has been developed. To achieve the maximum output of 300 A and 1 kV, SiC MOSFETs are used as switching modules. The newly developed power supply can generate bipolar trapezoidal current waveforms at 60 Hz, and the amplitude and polarity of each waveform are controlled from pulse to pulse according to the beam energy and destination. The target stability is 10 ppm (peak to peak). In this presentation, we report the design and operation results of the newly developed pattern power supply.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-WEPVA061  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)