IPAC2017 - List of Authors (Mierau, A.)

Paper	Title	Page
WEOCB2	Superconducting Magnets at FAIR	2546
	E.S. Fischer, A. Bleile, J. Ceballos Velasco, V.I. Datskov, F. Kaether, J.P. Meier, A. Mierau, H. Müller, C. Roux, P.J. Spiller, K. Sugita GSI, Darmstadt, Germany
	For the FAIR (Facility of Antiproton and Ion Research) accelerators, various technologies of superconducting magnets have been developed. In total, 613 superconducting magnets are required for the FAIR modularized start version. For the heavy ion synchrotron SIS100, which is the central accelerator under construction, fast ramped, iron dominated superconducting magnets of the Nuclotron type will be used. Due to the high beam intensity operation desired for SIS100, highest precision and reproducibility is requested for the iron yoke of these magnets. For the dipole magnets of SIS100 the series production has already been released. In parallel, the Super-FRS will be built for the generation of radioactive beams and for isotope separation. Huge aperture superconducting dipole magnets and multiplet modules are required for the main separator of the Super-FRS. For testing of the various types of sc magnets, three test facilities at GSI, JINR and CERN have been set-up. We give an overview on the modern design aspects for the different magnet types and their first test results and the preparation of the appropriate test facilities.
	Slides WEOCB2 [12.633 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-WEOCB2
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPVA030	FAIR SIS100 - Features and Status of Realisation	3320
	P.J. Spiller, U. Blell, L.H.J. Bozyk, T. Eisel, E.S. Fischer, J. Henschel, P. Hülsmann, H. Klingbeil, H.G. König, H. Kollmus, P. Kowina, J.P. Meier, A. Mierau, C. Mühle, C. Omet, D. Ondreka, V.P. Plyusnin, I. Pongrac, N. Pyka, P. Rottländer, C. Roux, J. Stadlmann, B. Streicher, St. Wilfert GSI, Darmstadt, Germany
	SIS100 is a unique heavy ion synchrotron designed for the generation of high intensity heavy ion and Proton beams. New features and solutions are implemented to enable operation with low charge state heavy ions and to minimize ionization beam loss driven by collisions with the residual gas. SIS100 aims for new frontier and world wide leading Uranium bam intensities. A huge effort is taken to stabilized the dynamics of the residual gas pressure and to suppress ion induced desorption. Fast ramped superconducting magnets have been developed and are in production with highest precision in engineering and field quality, matching the requirements from beams with high space charge. A powerful equipment with Rf stations for fast acceleration, pre- and final compression, for the generation of barrier buckets and provision of longitudinal feed-back shall allow a flexible handling of the ion bunches for the matching to various user requirements. Results obtained with FOS (first of series) devices, status of realisation and technical challenges resulting from the demanding goals, will be presented.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-WEPVA030
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Superconducting Magnets at FAIR

2546

E.S. Fischer, A. Bleile, J. Ceballos Velasco, V.I. Datskov, F. Kaether, J.P. Meier, A. Mierau, H. Müller, C. Roux, P.J. Spiller, K. Sugita
GSI, Darmstadt, Germany

For the FAIR (Facility of Antiproton and Ion Research) accelerators, various technologies of superconducting magnets have been developed. In total, 613 superconducting magnets are required for the FAIR modularized start version. For the heavy ion synchrotron SIS100, which is the central accelerator under construction, fast ramped, iron dominated superconducting magnets of the Nuclotron type will be used. Due to the high beam intensity operation desired for SIS100, highest precision and reproducibility is requested for the iron yoke of these magnets. For the dipole magnets of SIS100 the series production has already been released. In parallel, the Super-FRS will be built for the generation of radioactive beams and for isotope separation. Huge aperture superconducting dipole magnets and multiplet modules are required for the main separator of the Super-FRS. For testing of the various types of sc magnets, three test facilities at GSI, JINR and CERN have been set-up. We give an overview on the modern design aspects for the different magnet types and their first test results and the preparation of the appropriate test facilities.

Slides WEOCB2 [12.633 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-WEOCB2

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPVA030

FAIR SIS100 - Features and Status of Realisation

3320

P.J. Spiller, U. Blell, L.H.J. Bozyk, T. Eisel, E.S. Fischer, J. Henschel, P. Hülsmann, H. Klingbeil, H.G. König, H. Kollmus, P. Kowina, J.P. Meier, A. Mierau, C. Mühle, C. Omet, D. Ondreka, V.P. Plyusnin, I. Pongrac, N. Pyka, P. Rottländer, C. Roux, J. Stadlmann, B. Streicher, St. Wilfert
GSI, Darmstadt, Germany

SIS100 is a unique heavy ion synchrotron designed for the generation of high intensity heavy ion and Proton beams. New features and solutions are implemented to enable operation with low charge state heavy ions and to minimize ionization beam loss driven by collisions with the residual gas. SIS100 aims for new frontier and world wide leading Uranium bam intensities. A huge effort is taken to stabilized the dynamics of the residual gas pressure and to suppress ion induced desorption. Fast ramped superconducting magnets have been developed and are in production with highest precision in engineering and field quality, matching the requirements from beams with high space charge. A powerful equipment with Rf stations for fast acceleration, pre- and final compression, for the generation of barrier buckets and provision of longitudinal feed-back shall allow a flexible handling of the ion bunches for the matching to various user requirements. Results obtained with FOS (first of series) devices, status of realisation and technical challenges resulting from the demanding goals, will be presented.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-WEPVA030

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)