IPAC2017 - List of Authors (Meng, C.)

Paper	Title	Page
MOPVA025	Step-Like Field Magnets to Uniform Beam Distribution and Experiment at CADS Injector-I	908
	C. Meng, Y. Chen, H. Geng, J.Y. Tang, F. Yan, L. Yu, Y.L. Zhao IHEP, Beijing, People's Republic of China
	High power is the development tendency of proton accelerator, so obtaining uniform beam distribution on target becomes more and more important and critical. The method of using step-like field magnets to obtain a uniform beam distribution on target was presented. In the beamdump line of CADS injector-I test facility four step-like field magnets have been installed to uniform beam distribution to reduce the maximum current density on the beamdump. The magnetic field of step-like field magnets have been measured and discussed in this paper. The simulation results and measurement results of beam uniformization are presented.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-MOPVA025
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPAB008	CEPC Linac Design and Beam Dynamics	1315
	C. Meng, Y.L. Chi, X.P. Li, G. Pei, S. Pei, D. Wang, J.R. Zhang IHEP, Beijing, People's Republic of China
	Circular Electron-Positron Collider (CEPC) is a 100 km ring e⁺ e⁻ collider for a Higgs factory, which is organized and led by the Institute of High Energy Physics (IHEP) of the Chinese Academy of Sciences (CAS) in collaboration with a number of institutions from various countries. The linac of CEPC is a normal con-ducting S-band linac with frequency in 2856.75 MHz and provide electron and positron beam at an energy up to 10 GeV with bunch charge in 1.0 nC and repetition frequency in 100 Hz. The linac scheme will be detailed discussed in this paper, including electron bunching system, positron source design, and main linac. Positrons are generated using a 4 GeV electron beam with bunch charge 10 nC hit tungsten target and the positron source design are presented. The beam dynamic results with longitudinal short Wakefield, transverse Wakefield and errors are presented.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-TUPAB008
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPAB009	Design Study on CEPC Positron Damping Ring and Bunch Compressor	1318
	D. Wang, Y.L. Chi, J. Gao, X.P. Li, C. Meng, J.R. Zhang IHEP, Beijing, People's Republic of China G. Pei Institute of High Energy Physics (IHEP), Chinese Academy of Sciences, Beijing, People's Republic of China
	The primary purpose of CEPC damping ring is to reduce the transverse phase spaces of positron beam to suitably small value at the beginning of Linac and also adjust the time structure of positron beam for reinjection into the Linac. Longitudinal bunch length control was provided to minimize wake field effects in the Linac by a bunch compressor system after the damping ring. Both designs for damping ring and bunch compressor were discussed in this paper.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-TUPAB009
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THOAA2	Research on Compensation of Superconducting Cavity Failures in C-ADS Injector-I	3635
	J.P. Dai, C. Meng, Y. Shao, Z. Xue, F. Yan IHEP, Beijing, People's Republic of China
	Funding: Work supported by Natural Science Foundation of China (11575216) For the proton accelerators such as the China Accelerator Driven subcritical System(C-ADS), it is essential and difficult to achieve extremely high performance reliability requirement. In order to achieve this performance reliability requirement, in addition to hardware improvement, a failure tolerant design is mandatory. A compensation mechanism to cope with hardware failure, mainly RF failures of superconducting cavities, will be in place in order to maintain the high uptime, short recovery time and extremely low frequency of beam loss. This paper proposes an innovative and challenging way for compensation and rematch of cavity failure with the hardware implementation of the scheme using fast electronic devices and Field Programmable Gate Arrays (FPGAs). A method combined building an equivalent model for the FPGA with an improved genetic algorithm has been developed. Results based on the model and algorithm are compared with TRACEWIN simulation to show the precision and correctness of the mechanism.
	Slides THOAA2 [2.414 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-THOAA2
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Step-Like Field Magnets to Uniform Beam Distribution and Experiment at CADS Injector-I

908

C. Meng, Y. Chen, H. Geng, J.Y. Tang, F. Yan, L. Yu, Y.L. Zhao
IHEP, Beijing, People's Republic of China

High power is the development tendency of proton accelerator, so obtaining uniform beam distribution on target becomes more and more important and critical. The method of using step-like field magnets to obtain a uniform beam distribution on target was presented. In the beamdump line of CADS injector-I test facility four step-like field magnets have been installed to uniform beam distribution to reduce the maximum current density on the beamdump. The magnetic field of step-like field magnets have been measured and discussed in this paper. The simulation results and measurement results of beam uniformization are presented.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-MOPVA025

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPAB008

CEPC Linac Design and Beam Dynamics

1315

C. Meng, Y.L. Chi, X.P. Li, G. Pei, S. Pei, D. Wang, J.R. Zhang
IHEP, Beijing, People's Republic of China

Circular Electron-Positron Collider (CEPC) is a 100 km ring e⁺ e⁻ collider for a Higgs factory, which is organized and led by the Institute of High Energy Physics (IHEP) of the Chinese Academy of Sciences (CAS) in collaboration with a number of institutions from various countries. The linac of CEPC is a normal con-ducting S-band linac with frequency in 2856.75 MHz and provide electron and positron beam at an energy up to 10 GeV with bunch charge in 1.0 nC and repetition frequency in 100 Hz. The linac scheme will be detailed discussed in this paper, including electron bunching system, positron source design, and main linac. Positrons are generated using a 4 GeV electron beam with bunch charge 10 nC hit tungsten target and the positron source design are presented. The beam dynamic results with longitudinal short Wakefield, transverse Wakefield and errors are presented.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-TUPAB008

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPAB009

Design Study on CEPC Positron Damping Ring and Bunch Compressor

1318

D. Wang, Y.L. Chi, J. Gao, X.P. Li, C. Meng, J.R. Zhang
IHEP, Beijing, People's Republic of China
G. Pei
Institute of High Energy Physics (IHEP), Chinese Academy of Sciences, Beijing, People's Republic of China

The primary purpose of CEPC damping ring is to reduce the transverse phase spaces of positron beam to suitably small value at the beginning of Linac and also adjust the time structure of positron beam for reinjection into the Linac. Longitudinal bunch length control was provided to minimize wake field effects in the Linac by a bunch compressor system after the damping ring. Both designs for damping ring and bunch compressor were discussed in this paper.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-TUPAB009

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THOAA2

Research on Compensation of Superconducting Cavity Failures in C-ADS Injector-I

3635

J.P. Dai, C. Meng, Y. Shao, Z. Xue, F. Yan
IHEP, Beijing, People's Republic of China

Funding: Work supported by Natural Science Foundation of China (11575216)
For the proton accelerators such as the China Accelerator Driven subcritical System(C-ADS), it is essential and difficult to achieve extremely high performance reliability requirement. In order to achieve this performance reliability requirement, in addition to hardware improvement, a failure tolerant design is mandatory. A compensation mechanism to cope with hardware failure, mainly RF failures of superconducting cavities, will be in place in order to maintain the high uptime, short recovery time and extremely low frequency of beam loss. This paper proposes an innovative and challenging way for compensation and rematch of cavity failure with the hardware implementation of the scheme using fast electronic devices and Field Programmable Gate Arrays (FPGAs). A method combined building an equivalent model for the FPGA with an improved genetic algorithm has been developed. Results based on the model and algorithm are compared with TRACEWIN simulation to show the precision and correctness of the mechanism.

Slides THOAA2 [2.414 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-THOAA2

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)