| Paper | Title | Page |
|---|---|---|
| TUPIK115 | Control System Developments for the Diamond Light Source DDBA Upgrade | 1996 |
|
||
|
Upgrading one Double Bend Achromat cell to a Double Double Bend Achromat (DDBA) cell in the Diamond Light Source storage ring* necessitated a broad range of changes to the overall control system. These changes covered developments to the interface layer of the controls system to incorporate changes to the underlying instrumentation, associated development of user interface, changes to real-time feedback and feed-forward processes and to the online accelerator model. Given the pressures to minimise the shutdown length, the control system developments were optimised for time effective installation and commissioning. This paper outlines the control system developments for DDBA, the management process and lessons learnt from this process.
* R.P. Walker et al., The Double-Double Bend Achromat (DDBA) Lattice Modification for the Diamond Storage Ring, Proc. IPAC 2014, MOPRO103, (2014) |
||
| DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-TUPIK115 | |
| Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
| WEPAB095 | Electron Beam Commissioning of the DDBA Modification to the Diamond Storage Ring | 2800 |
|
||
|
The Diamond storage ring has been modified by replacing one of the existing double bend achromat (DBA) cells with a double-DBA (DDBA) cell*. This change represents the largest modification to the storage ring since it was first commissioned in 2006, and was installed and fully commissioned during a single 8 week shutdown in autumn 2016. In view of this tight schedule, the planned commissioning steps and all high-level software needed to be developed and thoroughly tested in advance. Electron beam commissioning occupied the final 2 weeks of the shutdown, during which the injected electrons were captured and accumulated, the correct linear lattice was established, the nonlinear beam dynamics were studied, IDs were closed and the target 300 mA was achieved. This paper presents an overview of these activities.
* R.P. Walker et al., 'The Double-Double Bend Achromat (DDBA) Lattice Modification for the Diamond Storage Ring', Proc. IPAC 2014, MOPRO103, (2014) |
||
| DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-WEPAB095 | |
| Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
| THPAB153 | An Online Multi-Objective Optimisation Package | 4092 |
|
||
| The overall performance of an electron storage ring is critically dependant on a large number of variables. It can be characterised in many ways, such as by lifetime, injection efficiency, beam stability and so on. It is frequently the case however that improving one parameter comes at the cost of harming another. Equally, given the large number of variables involved in optimising the ring performance, the true, global optimum solution may be difficult to identify using simple parameter scans. In order to address this problem, a flexible optimisation tool has been developed. This tool is capable of optimising several parameters at once and can cope with an arbitrary number of variables (individually or in families). The tool is designed to be robust to measurement noise, and has been applied to a number of different optimisation problems. This paper presents an overview of the package, as well as the results of the first tests. | ||
| DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-THPAB153 | |
| Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |