IPAC2017 - List of Authors (Lederer, S.)

Paper	Title	Page
MOPAB044	X-Band TDS Project	184
	B. Marchetti, R.W. Aßmann, B. Beutner, J. Branlard, F. Christie, R.T.P. D'Arcy, W. Decking, U. Dorda, J. Herrmann, M. Hoffmann, M. Hüning, O. Krebs, G. Kube, S. Lederer, F. Ludwig, F. Marutzky, D. Marx, J. Osterhoff, I. Peperkorn, S. Pfeiffer, F. Poblotzki, J. Rönsch-Schulenburg, J. Rothenburg, H. Schlarb, M. Scholz, S. Schreiber, M. Vogt, A. Wagner, T. Wilksen, K. Wittenburg DESY, Hamburg, Germany M. Bopp, H.-H. Braun, P. Craievich, M. Pedrozzi, E. Prat, S. Reiche, K. Rolli, R. Zennaro PSI, Villigen PSI, Switzerland N. Catalán Lasheras, A. Grudiev, G. McMonagle, W. Wuensch CERN, Geneva, Switzerland
	Based on the success of the X-Band Transverse Deflecting Structure (TDS) diagnostic at LCLS, a collaboration between DESY, PSI and CERN has formed with the aim of developing and building an advanced modular X-Band TDS system. The designed TDS has the new feature of providing variable polarization of the deflecting field. The possibility of changing the orientation of the streaking field of the TDS to an arbitrary azimuthal angle allows for 3D characterization of the phase space using tomographic methods. Moreover the complete 6D characterization of the beam phase space is possible by combining this technique with quadrupole scans and a dipole spectrometer. As this new cavity design requires very high manufacturing precision to guarantee highest azimuthal symmetry of the structure to avoid the deterioration of the polarization of the streaking field, the high precision tuning-free assembly procedures developed at PSI for the SwissFEL C-band accelerating structures will be used for the manufacturing*. The high-power rf system is based on the CERN-based X-band test stands. We summarize in this work the status of the projects and its main technical parameters. C. Behrens et al. , Nat. Comm. 4762 (2014). A. Grudiev, CLIC-note-1067 (2016). * D. Marx et al., contribution to this conference proceedings. **** U. Ellenberger et al., FEL 2013, TUPS017.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-MOPAB044
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPAB040	Status Update of the SINBAD-ARES Linac Under Construction at DESY	1412
	B. Marchetti, R.W. Aßmann, S. Baark, U. Dorda, C. Engling, K. Flöttmann, I. Hartl, J. Hauser, J. Herrmann, M. Hüning, M. Körfer, B. Krause, G. Kube, J. Kuhlmann, S. Lederer, F. Ludwig, D. Marx, F. Mayet, M. Pelzer, I. Peperkorn, A. Petrov, S. Pfeiffer, S. Pumpe, J. Rothenburg, H. Schlarb, M. Titberidze, S. Vilcins, M. Werner, Ch. Wiebers, L. Winkelmann, K. Wittenburg, J. Zhu DESY, Hamburg, Germany
	ARES (Accelerator Research Experiment at Sinbad) is a linear accelerator for the production of low charge (from few pC to sub-pC) electron bunches with 100 MeV energy, fs and sub-fs duration and excellent arrival time stability. This experiment is currently under construction at DESY Hamburg and it is foreseen to start operation by the beginning of 2018 with the commissioning of the RF-gun. After an initial beam characterization phase, ARES will provide high temporal resolution probes for testing novel acceleration techniques, such as Laser driven plasma Wake-Field Acceleration (LWFA), Dielectric Laser Acceleration (DLA) and THz driven acceleration. In this work we present an overview of the present design of the linac with a special focus on 3D integration and planned installation phases of the beamline.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-TUPAB040
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPIK051	Statistics on High Average Power Operation and Results from the Electron Beam Characterization at PITZ	1806
	Y. Renier, P. Boonpornprasert, J.D. Good, M. Groß, H. Huck, I.I. Isaev, D.K. Kalantaryan, M. Krasilnikov, X. Li, O. Lishilin, G. Loisch, D. Melkumyan, A. Oppelt, H.J. Qian, T. Rublack, C. Saisa-ard, F. Stephan, Q.T. Zhao DESY Zeuthen, Zeuthen, Germany G. Asova INRNE, Sofia, Bulgaria M. Bousonville, S. Choroba, S. Lederer DESY, Hamburg, Germany
	The Photo Injector Test Facility at DESY in Zeuthen (PITZ) develops, tests and characterizes high brightness electron sources for FLASH and European XFEL. Since these FELs work with superconducting accelerators in pulsed mode, also the corresponding normal-conducting RF gun has to operate with long RF pulses. Generating high beam quality from the photo-cathode RF gun in addition requires a high accelerating gradient at the cathode. Therefore, the RF gun has to ensure stable and reliable operation at high average RF power, e.g. 6.5 MW peak power in the gun for 650 μs RF pulse length and 10 Hz repetition rate for the European XFEL. Several RF gun setups have been operated towards these goals over the last years. The latest gun setup is in operation since March 2016 and includes RF Gun 4.6 with an improved contact spring design. The RF input distribution consists of a coaxial coupler, a T-combiner and 2 RF windows from DESY production. In this contribution we will present statistics on the high average power operation and results from the characterization of the produced electron beam.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-TUPIK051
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPVA048	Particle Generation of CapaciTorr Pumps	3363
	S. Lederer, L. Lilje DESY, Hamburg, Germany E. Maccallini, P. Manini, F. Siviero SAES Getters S.p.A., Lainate, Italy
	Non Evaporable Getter pumps have been used since four decades in various scientific and industrial Ultra High and Extremely Ultra High Vacuum applications. For the majority of applications properties like high pumping speed vs. small size, powerless operation and hydrocarbon cleanliness are main aspects for the usage. In addition to this a growing number of applications nowadays also require particle free systems. In this paper we report on investigations on in-vacuum particle creation during the conditioning and activation process of CapaciTorr pumps.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-WEPVA048
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

X-Band TDS Project

184

B. Marchetti, R.W. Aßmann, B. Beutner, J. Branlard, F. Christie, R.T.P. D'Arcy, W. Decking, U. Dorda, J. Herrmann, M. Hoffmann, M. Hüning, O. Krebs, G. Kube, S. Lederer, F. Ludwig, F. Marutzky, D. Marx, J. Osterhoff, I. Peperkorn, S. Pfeiffer, F. Poblotzki, J. Rönsch-Schulenburg, J. Rothenburg, H. Schlarb, M. Scholz, S. Schreiber, M. Vogt, A. Wagner, T. Wilksen, K. Wittenburg
DESY, Hamburg, Germany
M. Bopp, H.-H. Braun, P. Craievich, M. Pedrozzi, E. Prat, S. Reiche, K. Rolli, R. Zennaro
PSI, Villigen PSI, Switzerland
N. Catalán Lasheras, A. Grudiev, G. McMonagle, W. Wuensch
CERN, Geneva, Switzerland

Based on the success of the X-Band Transverse Deflecting Structure (TDS) diagnostic at LCLS*, a collaboration between DESY, PSI and CERN has formed with the aim of developing and building an advanced modular X-Band TDS system. The designed TDS has the new feature of providing variable polarization of the deflecting field**. The possibility of changing the orientation of the streaking field of the TDS to an arbitrary azimuthal angle allows for 3D characterization of the phase space using tomographic methods***. Moreover the complete 6D characterization of the beam phase space is possible by combining this technique with quadrupole scans and a dipole spectrometer. As this new cavity design requires very high manufacturing precision to guarantee highest azimuthal symmetry of the structure to avoid the deterioration of the polarization of the streaking field, the high precision tuning-free assembly procedures developed at PSI for the SwissFEL C-band accelerating structures will be used for the manufacturing****. The high-power rf system is based on the CERN-based X-band test stands. We summarize in this work the status of the projects and its main technical parameters.
* C. Behrens et al. , Nat. Comm. 4762 (2014).
** A. Grudiev, CLIC-note-1067 (2016).
*** D. Marx et al., contribution to this conference proceedings.
**** U. Ellenberger et al., FEL 2013, TUPS017.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-MOPAB044

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPAB040

Status Update of the SINBAD-ARES Linac Under Construction at DESY

1412

B. Marchetti, R.W. Aßmann, S. Baark, U. Dorda, C. Engling, K. Flöttmann, I. Hartl, J. Hauser, J. Herrmann, M. Hüning, M. Körfer, B. Krause, G. Kube, J. Kuhlmann, S. Lederer, F. Ludwig, D. Marx, F. Mayet, M. Pelzer, I. Peperkorn, A. Petrov, S. Pfeiffer, S. Pumpe, J. Rothenburg, H. Schlarb, M. Titberidze, S. Vilcins, M. Werner, Ch. Wiebers, L. Winkelmann, K. Wittenburg, J. Zhu
DESY, Hamburg, Germany

ARES (Accelerator Research Experiment at Sinbad) is a linear accelerator for the production of low charge (from few pC to sub-pC) electron bunches with 100 MeV energy, fs and sub-fs duration and excellent arrival time stability. This experiment is currently under construction at DESY Hamburg and it is foreseen to start operation by the beginning of 2018 with the commissioning of the RF-gun. After an initial beam characterization phase, ARES will provide high temporal resolution probes for testing novel acceleration techniques, such as Laser driven plasma Wake-Field Acceleration (LWFA), Dielectric Laser Acceleration (DLA) and THz driven acceleration. In this work we present an overview of the present design of the linac with a special focus on 3D integration and planned installation phases of the beamline.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-TUPAB040

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPIK051

Statistics on High Average Power Operation and Results from the Electron Beam Characterization at PITZ

1806

Y. Renier, P. Boonpornprasert, J.D. Good, M. Groß, H. Huck, I.I. Isaev, D.K. Kalantaryan, M. Krasilnikov, X. Li, O. Lishilin, G. Loisch, D. Melkumyan, A. Oppelt, H.J. Qian, T. Rublack, C. Saisa-ard, F. Stephan, Q.T. Zhao
DESY Zeuthen, Zeuthen, Germany
G. Asova
INRNE, Sofia, Bulgaria
M. Bousonville, S. Choroba, S. Lederer
DESY, Hamburg, Germany

The Photo Injector Test Facility at DESY in Zeuthen (PITZ) develops, tests and characterizes high brightness electron sources for FLASH and European XFEL. Since these FELs work with superconducting accelerators in pulsed mode, also the corresponding normal-conducting RF gun has to operate with long RF pulses. Generating high beam quality from the photo-cathode RF gun in addition requires a high accelerating gradient at the cathode. Therefore, the RF gun has to ensure stable and reliable operation at high average RF power, e.g. 6.5 MW peak power in the gun for 650 μs RF pulse length and 10 Hz repetition rate for the European XFEL. Several RF gun setups have been operated towards these goals over the last years. The latest gun setup is in operation since March 2016 and includes RF Gun 4.6 with an improved contact spring design. The RF input distribution consists of a coaxial coupler, a T-combiner and 2 RF windows from DESY production. In this contribution we will present statistics on the high average power operation and results from the characterization of the produced electron beam.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-TUPIK051

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPVA048

Particle Generation of CapaciTorr Pumps

3363

S. Lederer, L. Lilje
DESY, Hamburg, Germany
E. Maccallini, P. Manini, F. Siviero
SAES Getters S.p.A., Lainate, Italy

Non Evaporable Getter pumps have been used since four decades in various scientific and industrial Ultra High and Extremely Ultra High Vacuum applications. For the majority of applications properties like high pumping speed vs. small size, powerless operation and hydrocarbon cleanliness are main aspects for the usage. In addition to this a growing number of applications nowadays also require particle free systems. In this paper we report on investigations on in-vacuum particle creation during the conditioning and activation process of CapaciTorr pumps.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-WEPVA048

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)