IPAC2017 - List of Authors (Hokonohara, H.)

Paper	Title	Page
MOPVA071	Press Forming Tests of Superconducting Spoke Cavity for Laser Compton Scattered Photon Sources	1031
	M. Sawamura, R. Hajima QST, Tokai, Japan H. Hokonohara, Y. Iwashita, H. Tongu Kyoto ICR, Uji, Kyoto, Japan T. Kubo, T. Saeki KEK, Ibaraki, Japan
	We are developing the superconducting spoke cavity for laser Compton scattered (LCS) photon sources. We adopt the superconducting spoke cavity for electron beam drivers to realize a wide use of LCS X-ray and '-ray sources in academic and industrial applications. The spoke cavity can make the accelerator more compact than an elliptical cavity because the cavity size is small at the same frequency and the packing factor is good by installing couplers on outer conductor. Though our proposal design for the photon source consists of the 325 MHz spoke cavities in 4K operation, we are fabricating the half scale model of 650 MHz spoke cavity in order to accumulate our cavity production experience by effective utilization of our limited resources. Since the spoke has more complicated structure than an elliptical cavity, we performed press forming tests for the half spoke and estimated the formed shapes with 3-dimensional measurement.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-MOPVA071
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPVA075	Development of High Sensitive X-Ray Mapping for SC Cavities	1040
	H. Tongu, H. Hokonohara, Y. Iwashita Kyoto ICR, Uji, Kyoto, Japan R.L. Geng, A.D. Palczewski JLab, Newport News, Virginia, USA H. Hayano, T. Kubo, T. Saeki, Y. Yamamoto KEK, Ibaraki, Japan H. Oikawa Utsunomiya University, Utsunomiya, Japan
	We developed an X-ray mapping system sX-map for superconducting cavities. The sensors are inserted under the stiffener rings between cavity cells, whose locations are close to the iris areas. The whole circuits are im-mersed in liquid He and the multiplexed signals reduces the number of cables to the room temperature region. sX-map has the advantages in its compact size, low cost and simple setup for nondestructive inspections. The sX-map system detected X-rays from field emissions in vertical RF tests of ILC 9-cell cavities at Jefferson Lab (JLab) and KEK. sX-map showed an excellent performance in the meas-urement test at JLab, it exhibited a high sensitivity com-pared with an the fixed diode rings colocated at irises and ion chamber located out side of the vertical test cryostat.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-MOPVA075
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Press Forming Tests of Superconducting Spoke Cavity for Laser Compton Scattered Photon Sources

1031

M. Sawamura, R. Hajima
QST, Tokai, Japan
H. Hokonohara, Y. Iwashita, H. Tongu
Kyoto ICR, Uji, Kyoto, Japan
T. Kubo, T. Saeki
KEK, Ibaraki, Japan

We are developing the superconducting spoke cavity for laser Compton scattered (LCS) photon sources. We adopt the superconducting spoke cavity for electron beam drivers to realize a wide use of LCS X-ray and '-ray sources in academic and industrial applications. The spoke cavity can make the accelerator more compact than an elliptical cavity because the cavity size is small at the same frequency and the packing factor is good by installing couplers on outer conductor. Though our proposal design for the photon source consists of the 325 MHz spoke cavities in 4K operation, we are fabricating the half scale model of 650 MHz spoke cavity in order to accumulate our cavity production experience by effective utilization of our limited resources. Since the spoke has more complicated structure than an elliptical cavity, we performed press forming tests for the half spoke and estimated the formed shapes with 3-dimensional measurement.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-MOPVA071

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPVA075

Development of High Sensitive X-Ray Mapping for SC Cavities

1040

H. Tongu, H. Hokonohara, Y. Iwashita
Kyoto ICR, Uji, Kyoto, Japan
R.L. Geng, A.D. Palczewski
JLab, Newport News, Virginia, USA
H. Hayano, T. Kubo, T. Saeki, Y. Yamamoto
KEK, Ibaraki, Japan
H. Oikawa
Utsunomiya University, Utsunomiya, Japan

We developed an X-ray mapping system sX-map for superconducting cavities. The sensors are inserted under the stiffener rings between cavity cells, whose locations are close to the iris areas. The whole circuits are im-mersed in liquid He and the multiplexed signals reduces the number of cables to the room temperature region. sX-map has the advantages in its compact size, low cost and simple setup for nondestructive inspections. The sX-map system detected X-rays from field emissions in vertical RF tests of ILC 9-cell cavities at Jefferson Lab (JLab) and KEK. sX-map showed an excellent performance in the meas-urement test at JLab, it exhibited a high sensitivity com-pared with an the fixed diode rings colocated at irises and ion chamber located out side of the vertical test cryostat.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-MOPVA075

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)