IPAC2017 - List of Authors (Chritin, N.)

Paper	Title	Page
MOPAB121	Installation and Test of Pre-series Wire Scanners for the LHC Injector Upgrade Project at CERN	412
	R. Veness, P. Andersson, W. Andreazza, N. Chritin, B. Dehning, J. Emery, A. Goldblatt, D. Gudkov, F. Roncarolo, J.L. Sirvent, J. Tassan-Viol CERN, Geneva, Switzerland
	A new generation of fast wire scanners is being developed for the LHC Injectors Upgrade (LIU) project at CERN. These will be essential tools for transverse profile measurement with the higher brightness LIU beams, and are planned for installation in 2019 in all three synchrotrons making up the LHC injector chain. An active period of development and test has resulted in prototype installations in the SPS and PSB rings. This paper will summarise the design and report on the results to-date.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-MOPAB121
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPAB139	A Supersonic Gas-Jet Based Beam Induced Fluorescence Prototype Monitor for Transverse Profile Determination	458
	H.D. Zhang, E. Martin, V. Tzoganis, C.P. Welsch Cockcroft Institute, Warrington, Cheshire, United Kingdom E. Barrios Diaz, N. Chritin, O.R. Jones, G. Schneider, R. Veness CERN, Geneva, Switzerland P. Forck, S. Udrea GSI, Darmstadt, Germany P. Forck IAP, Frankfurt am Main, Germany E. Martin, V. Tzoganis, C.P. Welsch, H.D. Zhang The University of Liverpool, Liverpool, United Kingdom S. Udrea TU Darmstadt, Darmstadt, Germany
	Supersonic gas jets have been used in transverse beam profile monitoring as Ionization Profile Monitors (IPMs) and Beam Induced Fluorescence (BIF) monitors. The former method images ions generated by the projectile beam, whilst the latter is based on the detection of photons. This is a promising technology for use in high energy accelerators, such as the High Luminosity Large Hadron Collider (HLLHC). In this paper, the suitability of a supersonic gas jet in combination with a BIF detection system for the measurement of the transverse beam profile of a low energy electron beam is discussed. The technical layout and experimental results from measurements at a test installation at the Cockcroft Institute are also presented.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-MOPAB139
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUOAB1	First LHC Transverse Beam Size Measurements With the Beam Gas Vertex Detector	1240
SUSPSIK078	use link to see paper's listing under its alternate paper code
	A. Alexopoulos, C. Barschel, E. Bravin, G. Bregliozzi, N. Chritin, B. Dehning, M. Ferro-Luzzi, M. Giovannozzi, R. Jacobsson, L.K. Jensen, O.R. Jones, V. Kain, R. Matev, M.N. Rihl, V. Salustino Guimaraes, R. Veness, S. Vlachos, B. Würkner CERN, Geneva, Switzerland A. Bay, F. Blanc, S. Gianì, O. Girard, G.J. Haefeli, P. Hopchev, A. Kuonen, T. Nakada, O. Schneider, M. Tobin, Q.D. Veyrat, Z. Xu EPFL, Lausanne, Switzerland R. Greim, W. Karpinski, T. Kirn, S. Schael, A. Schultz von Dratzig, G. Schwering, M. Wlochal RWTH, Aachen, Germany
	The Beam Gas Vertex detector (BGV) is an innovative beam profile monitor based on the reconstruction of beam-gas interaction vertices which is being developed as part of the High Luminosity LHC project. Tracks are identified using several planes of scintillating fibres, located outside the beam vacuum chamber and perpendicular to the beam axis. The gas pressure in the interaction volume is adjusted such as to provide an adequate trigger rate, without disturbing the beam. A BGV demonstrator monitoring one of the two LHC beams was fully installed and commissioned in 2016. First data and beam size measurements show that the complete detector and data acquisition system is operating as expected. The BGV operating parameters are now being optimised and the reconstruction algorithms developed to produce accurate and fast reconstruction on a CPU farm in order to provide real time beam profile measurements to the LHC operators.
	Slides TUOAB1 [3.456 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-TUOAB1
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Installation and Test of Pre-series Wire Scanners for the LHC Injector Upgrade Project at CERN

412

R. Veness, P. Andersson, W. Andreazza, N. Chritin, B. Dehning, J. Emery, A. Goldblatt, D. Gudkov, F. Roncarolo, J.L. Sirvent, J. Tassan-Viol
CERN, Geneva, Switzerland

A new generation of fast wire scanners is being developed for the LHC Injectors Upgrade (LIU) project at CERN. These will be essential tools for transverse profile measurement with the higher brightness LIU beams, and are planned for installation in 2019 in all three synchrotrons making up the LHC injector chain. An active period of development and test has resulted in prototype installations in the SPS and PSB rings. This paper will summarise the design and report on the results to-date.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-MOPAB121

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPAB139

A Supersonic Gas-Jet Based Beam Induced Fluorescence Prototype Monitor for Transverse Profile Determination

458

H.D. Zhang, E. Martin, V. Tzoganis, C.P. Welsch
Cockcroft Institute, Warrington, Cheshire, United Kingdom
E. Barrios Diaz, N. Chritin, O.R. Jones, G. Schneider, R. Veness
CERN, Geneva, Switzerland
P. Forck, S. Udrea
GSI, Darmstadt, Germany
P. Forck
IAP, Frankfurt am Main, Germany
E. Martin, V. Tzoganis, C.P. Welsch, H.D. Zhang
The University of Liverpool, Liverpool, United Kingdom
S. Udrea
TU Darmstadt, Darmstadt, Germany

Supersonic gas jets have been used in transverse beam profile monitoring as Ionization Profile Monitors (IPMs) and Beam Induced Fluorescence (BIF) monitors. The former method images ions generated by the projectile beam, whilst the latter is based on the detection of photons. This is a promising technology for use in high energy accelerators, such as the High Luminosity Large Hadron Collider (HLLHC). In this paper, the suitability of a supersonic gas jet in combination with a BIF detection system for the measurement of the transverse beam profile of a low energy electron beam is discussed. The technical layout and experimental results from measurements at a test installation at the Cockcroft Institute are also presented.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-MOPAB139

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUOAB1

First LHC Transverse Beam Size Measurements With the Beam Gas Vertex Detector

1240

SUSPSIK078

use link to see paper's listing under its alternate paper code

A. Alexopoulos, C. Barschel, E. Bravin, G. Bregliozzi, N. Chritin, B. Dehning, M. Ferro-Luzzi, M. Giovannozzi, R. Jacobsson, L.K. Jensen, O.R. Jones, V. Kain, R. Matev, M.N. Rihl, V. Salustino Guimaraes, R. Veness, S. Vlachos, B. Würkner
CERN, Geneva, Switzerland
A. Bay, F. Blanc, S. Gianì, O. Girard, G.J. Haefeli, P. Hopchev, A. Kuonen, T. Nakada, O. Schneider, M. Tobin, Q.D. Veyrat, Z. Xu
EPFL, Lausanne, Switzerland
R. Greim, W. Karpinski, T. Kirn, S. Schael, A. Schultz von Dratzig, G. Schwering, M. Wlochal
RWTH, Aachen, Germany

The Beam Gas Vertex detector (BGV) is an innovative beam profile monitor based on the reconstruction of beam-gas interaction vertices which is being developed as part of the High Luminosity LHC project. Tracks are identified using several planes of scintillating fibres, located outside the beam vacuum chamber and perpendicular to the beam axis. The gas pressure in the interaction volume is adjusted such as to provide an adequate trigger rate, without disturbing the beam. A BGV demonstrator monitoring one of the two LHC beams was fully installed and commissioned in 2016. First data and beam size measurements show that the complete detector and data acquisition system is operating as expected. The BGV operating parameters are now being optimised and the reconstruction algorithms developed to produce accurate and fast reconstruction on a CPU farm in order to provide real time beam profile measurements to the LHC operators.

Slides TUOAB1 [3.456 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-TUOAB1

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)