IPAC2017 - List of Authors (Cerutti, F.)

Paper	Title	Page
MOPAB003	Energy Deposition in the Betatron Collimation Insertion of the 100 TeV Future Circular Collider	68
	M.I. Besana, C. Bahamonde Castro, A. Bertarelli, R. Bruce, F. Carra, F. Cerutti, A. Ferrari, M. Fiascaris, A. Lechner, A. Mereghetti, S. Redaelli, E. Skordis, V. Vlachoudis CERN, Geneva, Switzerland
	The FCC proton beam is designed to carry a total energy of about 8500 MJ, a factor of 20 above the LHC. In this context, the collimation system has to deal with extremely tight requirements to prevent quenches and material damage. A first layout of the betatron cleaning insertion was conceived, adapting the present LHC collimation system to the FCC lattice. A crucial ingredient to assess its performance, in particular to estimate the robustness of the protection devices and the load on the downstream elements, is represented by the simulation of the particle shower generated at the collimators, allowing detailed energy deposition estimations. This paper presents the first results of the simulation chain starting from the proton losses generated with the Sixtrack-FLUKA coupling, as currently done for the present LHC and for its upgrade. Expectations in terms of total power, peak power density and integrated dose on the different accelerator components are presented.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-MOPAB003
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPAB004	Improved Protection of the Warm Magnets of the LHC Betatron Cleaning Insertion	72
	C. Bahamonde Castro, F. Cerutti, P. Fessia, A. Lechner, A. Mereghetti, D. Mirarchi, S. Redaelli, E. Skordis CERN, Geneva, Switzerland E. Skordis The University of Liverpool, Liverpool, United Kingdom
	After the High Luminosity (HL) upgrade in 2024-2026, the LHC is anticipated to increase its integrated luminosity by a factor of 10 beyond its original design value of 300 fb-1. In preparation for this, several improvements to the equipment will already be implemented during the next Long Shutdown (LS2) starting in 2019. In the betatron cleaning insertion, the debris leaking out of several collimators will deposit energy in the downstream warm magnets, causing long-term radiation damage. A new layout has been proposed in which the most exposed magnet of each assembly is removed, reducing the assembly from 6 to 5 magnet units and gaining 2 spare magnets. New absorbers are therefore required to enhance the shielding of the remaining magnet string. In this paper, we present an evaluation of the dose to the warm magnets for post-LS2 operation, and we quantify the achievable reduction of the long-term radiation damage for different absorber configurations. A solution for an improved magnet protection that fulfills the HL-LHC requirements is proposed.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-MOPAB004
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPAB011	Impact on the HL-LHC Triplet Region and Experiments From Asynchronous Beam Dumps on Tertiary Collimators	96
	A. Tsinganis, R. Bruce, F. Cerutti, A. Lechner CERN, Geneva, Switzerland
	Accidental beam impacts on the tertiary collimators (TCTs) can lead to significant energy deposition in the triplet region and to leakage of the induced particle shower towards the experimental cavern. In this work, carried out in the context of the planned High Luminosity Upgrade of the LHC, severe impacts from asynchronous beam dumps on the horizontal tertiary collimators in cells 4 and 6 of the CMS insertion were studied, with half or a full proton bunch impacting on a collimator jaw. The choice of jaw material is shown to be of great importance, with over a factor of 10 increase in peak energy density values in the triplet coils moving from tungsten (Inermet) to molybdenum graphite jaws. Nevertheless, although the quench limit is exceeded in at least one or more triplet magnets in all the evaluated scenarios, values remain well below the damage limit. Energy spectra of particles leaking into the experimental cavern have also been estimated and are presented here.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-MOPAB011
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPAB012	Study of the 2015 Top Energy LHC Collimation Quench Tests Through an Advanced Simulation Chain	100
SUSPSIK009	use link to see paper's listing under its alternate paper code
	E. Skordis, C.P. Welsch The University of Liverpool, Liverpool, United Kingdom R. Bruce, F. Cerutti, A. Ferrari, P.D. Hermes, A. Lechner, A. Mereghetti, S. Redaelli, B. Salvachua, E. Skordis, V. Vlachoudis CERN, Geneva, Switzerland C.P. Welsch Cockcroft Institute, Warrington, Cheshire, United Kingdom
	While the LHC has shown record-breaking perfor-mance during the 2016 run, our understanding of the behaviour of the machine must also reach new levels. The collimation system and especially the betatron cleaning insertion region (IR7), where most of the beam halo is intercepted to protect superconducting (SC) magnets from quenching, has so far met the expectations but could nonetheless pose a bottleneck for future operation at higher beam intensities for HL-LHC. A better under-standing of the collimation leakage to SC magnets is required in order to quantify potential limitations in terms of cleaning efficiency, ultimately optimising the collider capabilities. Particle tracking simulations com-bined with shower simulations represent a powerful tool for quantifying the power deposition in magnets next to the cleaning insertion. In this study, we benchmark the simulation models against beam loss monitor measure-ments from magnet quench tests (QT) with 6.5 TeV pro-ton and 6.37Z TeV Pb ion beams. In addition, we investi-gate the effect of possible imperfections on the collima-tion leakage and the power deposition in magnets.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-MOPAB012
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPVA021	Impact of Collision Debris in the HL-LHC ATLAS and CMS Insertions	2093
	A. Tsinganis, F. Cerutti CERN, Geneva, Switzerland
	The High Luminosity upgrade of the LHC (HL-LHC) foresees the baseline operation of the accelerator at a 5 times higher peak luminosity (5.0x1034cm^-2s⁻¹). The impact of collision debris on the magnets and other equipment in the triplet region and matching section of the ATLAS and CMS insertions has been evaluated by means of detailed FLUKA models implementing the latest optics and layout version. Qualitative and quantitative differences between the vertical and horizontal beam crossing schemes are highlighted. With measures in place to mitigate the effects of the interruption of the beam screen in the triplet interconnections and the Q4 aperture reduction, peak dose values in the superconducting coils remain below 30MGy in the triplet-D1 and below 12MGy in the matching section magnets for an integrated luminosity of 3000fb-1. Peak power density values are lower than 3mW/cm³ and 1mW/cm³ in the triplet and matching section respectively. Total heat loads in magnets, collimators, masks and absorbers were also estimated, along with dose and particle fluence maps relevant for Radiation to Electronics (R2E) aspects. The effect of a displacement of the interaction point is also addressed.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-TUPVA021
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPVA040	Overview of Design Development of FCC-hh Experimental Interaction Regions	2151
	A. Seryi, J.L. Abelleira, E. Cruz Alaniz, L.J. Nevay, L. van Riesen-Haupt JAI, Oxford, United Kingdom R.B. Appleby, H. Rafique UMAN, Manchester, United Kingdom R.B. Appleby Cockcroft Institute, Warrington, Cheshire, United Kingdom J. Barranco García, T. Pieloni EPFL, Lausanne, Switzerland M. Benedikt, M.I. Besana, X. Buffat, H. Burkhardt, F. Cerutti, A. Langner, R. Martin, W. Riegler, D. Schulte, R. Tomás CERN, Geneva, Switzerland M. Boscolo, F. Collamati INFN/LNF, Frascati (Roma), Italy M. Hofer TU Vienna, Wien, Austria L.J. Nevay Royal Holloway, University of London, Surrey, United Kingdom L. van Riesen-Haupt University of Oxford, Oxford, United Kingdom
	The experimental interaction region is one of the key areas that define the performance of the Future Circular Collider. In this overview we will describe the status and the evolution of the design of EIR of FCC-hh, focusing on design of the optics, energy deposition in EIR elements, beam-beam effects and machine detector interface issues.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-TUPVA040
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEOBA1	A Comparison of Interaction Physics for Proton Collimation Systems in Current Simulation Tools	2478
	J. Molson, A. Faus-Golfe LAL, Orsay, France R.B. Appleby, S.C. Tygier UMAN, Manchester, United Kingdom R.J. Barlow IIAA, Huddersfield, United Kingdom R. Bruce, F. Cerutti, A. Ferrari, A. Mereghetti, S. Redaelli, K.N. Sjobak, V. Vlachoudis CERN, Geneva, Switzerland H. Rafique University of Manchester, Manchester, United Kingdom Y. Zou IHEP, Beijing, People's Republic of China
	Funding: The European Circular Energy-Frontier Collider Study (EuroCirCol) project has received funding from the European Union's Horizon 2020 research and innovation programme under grant No 654305. High performance collimation systems are required for current and proposed high energy hadron accelerators in order to protect superconducting magnets and experiments. In order to ensure that the collimation system designs are sufficient and will operate as expected, precision simulation tools are required. This paper discusses the current status of existing collimation system tools, and performs a comparison between codes in order to ensure that the simulated interaction physics between a proton and a collimator jaw is accurate.
	Slides WEOBA1 [7.235 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-WEOBA1
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPAB046	SixTrack for Cleaning Studies: 2017 Updates	3811
	A. Mereghetti, R. Bruce, F. Cerutti, R. De Maria, A. Ferrari, M. Fiascaris, P.D. Hermes, D. Mirarchi, P.G. Ortega, D. Pastor Sinuela, E. Quaranta, S. Redaelli, K.N. Sjobak, V. Vlachoudis CERN, Geneva, Switzerland J. Molson LAL, Orsay, France Y. Zou IHEP, Beijing, People's Republic of China
	SixTrack is a single particle tracking code for simulating beam dynamics in ultra-relativistic accelerators. It is widely used at the European Organisation for Nuclear Research (CERN) for predicting dynamic aperture and cleaning inefficiency in large circular machines like the Super Proton Synchrotron (SPS), the Large Hadron Collider (LHC) and the Future Circular Collider (FCC). The code is under continuous development, to both extend its physics models, and enhance performance. The present work gives an overview of developments, specifically aimed at extending the code capabilities for cleaning studies. They mainly involve: the online aperture check; the possibility to perform simulations coupled to advanced Monte Carlo codes like Fluka or using the scattering event generator of the Merlin code; the generalisation of tracking maps to ion species; the implementation of composite materials of relevance for the future upgrades of the LHC collimators; the physics of interactions with bent crystals. Plans to merge these functionalities into a single version of the SixTrack code will be outlined.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-THPAB046
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Energy Deposition in the Betatron Collimation Insertion of the 100 TeV Future Circular Collider

68

M.I. Besana, C. Bahamonde Castro, A. Bertarelli, R. Bruce, F. Carra, F. Cerutti, A. Ferrari, M. Fiascaris, A. Lechner, A. Mereghetti, S. Redaelli, E. Skordis, V. Vlachoudis
CERN, Geneva, Switzerland

The FCC proton beam is designed to carry a total energy of about 8500 MJ, a factor of 20 above the LHC. In this context, the collimation system has to deal with extremely tight requirements to prevent quenches and material damage. A first layout of the betatron cleaning insertion was conceived, adapting the present LHC collimation system to the FCC lattice. A crucial ingredient to assess its performance, in particular to estimate the robustness of the protection devices and the load on the downstream elements, is represented by the simulation of the particle shower generated at the collimators, allowing detailed energy deposition estimations. This paper presents the first results of the simulation chain starting from the proton losses generated with the Sixtrack-FLUKA coupling, as currently done for the present LHC and for its upgrade. Expectations in terms of total power, peak power density and integrated dose on the different accelerator components are presented.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-MOPAB003

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPAB004

Improved Protection of the Warm Magnets of the LHC Betatron Cleaning Insertion

72

C. Bahamonde Castro, F. Cerutti, P. Fessia, A. Lechner, A. Mereghetti, D. Mirarchi, S. Redaelli, E. Skordis
CERN, Geneva, Switzerland
E. Skordis
The University of Liverpool, Liverpool, United Kingdom

After the High Luminosity (HL) upgrade in 2024-2026, the LHC is anticipated to increase its integrated luminosity by a factor of 10 beyond its original design value of 300 fb-1. In preparation for this, several improvements to the equipment will already be implemented during the next Long Shutdown (LS2) starting in 2019. In the betatron cleaning insertion, the debris leaking out of several collimators will deposit energy in the downstream warm magnets, causing long-term radiation damage. A new layout has been proposed in which the most exposed magnet of each assembly is removed, reducing the assembly from 6 to 5 magnet units and gaining 2 spare magnets. New absorbers are therefore required to enhance the shielding of the remaining magnet string. In this paper, we present an evaluation of the dose to the warm magnets for post-LS2 operation, and we quantify the achievable reduction of the long-term radiation damage for different absorber configurations. A solution for an improved magnet protection that fulfills the HL-LHC requirements is proposed.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-MOPAB004

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPAB011

Impact on the HL-LHC Triplet Region and Experiments From Asynchronous Beam Dumps on Tertiary Collimators

96

A. Tsinganis, R. Bruce, F. Cerutti, A. Lechner
CERN, Geneva, Switzerland

Accidental beam impacts on the tertiary collimators (TCTs) can lead to significant energy deposition in the triplet region and to leakage of the induced particle shower towards the experimental cavern. In this work, carried out in the context of the planned High Luminosity Upgrade of the LHC, severe impacts from asynchronous beam dumps on the horizontal tertiary collimators in cells 4 and 6 of the CMS insertion were studied, with half or a full proton bunch impacting on a collimator jaw. The choice of jaw material is shown to be of great importance, with over a factor of 10 increase in peak energy density values in the triplet coils moving from tungsten (Inermet) to molybdenum graphite jaws. Nevertheless, although the quench limit is exceeded in at least one or more triplet magnets in all the evaluated scenarios, values remain well below the damage limit. Energy spectra of particles leaking into the experimental cavern have also been estimated and are presented here.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-MOPAB011

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPAB012

Study of the 2015 Top Energy LHC Collimation Quench Tests Through an Advanced Simulation Chain

100

SUSPSIK009

use link to see paper's listing under its alternate paper code

E. Skordis, C.P. Welsch
The University of Liverpool, Liverpool, United Kingdom
R. Bruce, F. Cerutti, A. Ferrari, P.D. Hermes, A. Lechner, A. Mereghetti, S. Redaelli, B. Salvachua, E. Skordis, V. Vlachoudis
CERN, Geneva, Switzerland
C.P. Welsch
Cockcroft Institute, Warrington, Cheshire, United Kingdom

While the LHC has shown record-breaking perfor-mance during the 2016 run, our understanding of the behaviour of the machine must also reach new levels. The collimation system and especially the betatron cleaning insertion region (IR7), where most of the beam halo is intercepted to protect superconducting (SC) magnets from quenching, has so far met the expectations but could nonetheless pose a bottleneck for future operation at higher beam intensities for HL-LHC. A better under-standing of the collimation leakage to SC magnets is required in order to quantify potential limitations in terms of cleaning efficiency, ultimately optimising the collider capabilities. Particle tracking simulations com-bined with shower simulations represent a powerful tool for quantifying the power deposition in magnets next to the cleaning insertion. In this study, we benchmark the simulation models against beam loss monitor measure-ments from magnet quench tests (QT) with 6.5 TeV pro-ton and 6.37Z TeV Pb ion beams. In addition, we investi-gate the effect of possible imperfections on the collima-tion leakage and the power deposition in magnets.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-MOPAB012

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPVA021

Impact of Collision Debris in the HL-LHC ATLAS and CMS Insertions

2093

A. Tsinganis, F. Cerutti
CERN, Geneva, Switzerland

The High Luminosity upgrade of the LHC (HL-LHC) foresees the baseline operation of the accelerator at a 5 times higher peak luminosity (5.0x1034cm^-2s⁻¹). The impact of collision debris on the magnets and other equipment in the triplet region and matching section of the ATLAS and CMS insertions has been evaluated by means of detailed FLUKA models implementing the latest optics and layout version. Qualitative and quantitative differences between the vertical and horizontal beam crossing schemes are highlighted. With measures in place to mitigate the effects of the interruption of the beam screen in the triplet interconnections and the Q4 aperture reduction, peak dose values in the superconducting coils remain below 30MGy in the triplet-D1 and below 12MGy in the matching section magnets for an integrated luminosity of 3000fb-1. Peak power density values are lower than 3mW/cm³ and 1mW/cm³ in the triplet and matching section respectively. Total heat loads in magnets, collimators, masks and absorbers were also estimated, along with dose and particle fluence maps relevant for Radiation to Electronics (R2E) aspects. The effect of a displacement of the interaction point is also addressed.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-TUPVA021

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPVA040

Overview of Design Development of FCC-hh Experimental Interaction Regions

2151

A. Seryi, J.L. Abelleira, E. Cruz Alaniz, L.J. Nevay, L. van Riesen-Haupt
JAI, Oxford, United Kingdom
R.B. Appleby, H. Rafique
UMAN, Manchester, United Kingdom
R.B. Appleby
Cockcroft Institute, Warrington, Cheshire, United Kingdom
J. Barranco García, T. Pieloni
EPFL, Lausanne, Switzerland
M. Benedikt, M.I. Besana, X. Buffat, H. Burkhardt, F. Cerutti, A. Langner, R. Martin, W. Riegler, D. Schulte, R. Tomás
CERN, Geneva, Switzerland
M. Boscolo, F. Collamati
INFN/LNF, Frascati (Roma), Italy
M. Hofer
TU Vienna, Wien, Austria
L.J. Nevay
Royal Holloway, University of London, Surrey, United Kingdom
L. van Riesen-Haupt
University of Oxford, Oxford, United Kingdom

The experimental interaction region is one of the key areas that define the performance of the Future Circular Collider. In this overview we will describe the status and the evolution of the design of EIR of FCC-hh, focusing on design of the optics, energy deposition in EIR elements, beam-beam effects and machine detector interface issues.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-TUPVA040

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEOBA1

A Comparison of Interaction Physics for Proton Collimation Systems in Current Simulation Tools

2478

J. Molson, A. Faus-Golfe
LAL, Orsay, France
R.B. Appleby, S.C. Tygier
UMAN, Manchester, United Kingdom
R.J. Barlow
IIAA, Huddersfield, United Kingdom
R. Bruce, F. Cerutti, A. Ferrari, A. Mereghetti, S. Redaelli, K.N. Sjobak, V. Vlachoudis
CERN, Geneva, Switzerland
H. Rafique
University of Manchester, Manchester, United Kingdom
Y. Zou
IHEP, Beijing, People's Republic of China

Funding: The European Circular Energy-Frontier Collider Study (EuroCirCol) project has received funding from the European Union's Horizon 2020 research and innovation programme under grant No 654305.
High performance collimation systems are required for current and proposed high energy hadron accelerators in order to protect superconducting magnets and experiments. In order to ensure that the collimation system designs are sufficient and will operate as expected, precision simulation tools are required. This paper discusses the current status of existing collimation system tools, and performs a comparison between codes in order to ensure that the simulated interaction physics between a proton and a collimator jaw is accurate.

Slides WEOBA1 [7.235 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-WEOBA1

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPAB046

SixTrack for Cleaning Studies: 2017 Updates

3811

A. Mereghetti, R. Bruce, F. Cerutti, R. De Maria, A. Ferrari, M. Fiascaris, P.D. Hermes, D. Mirarchi, P.G. Ortega, D. Pastor Sinuela, E. Quaranta, S. Redaelli, K.N. Sjobak, V. Vlachoudis
CERN, Geneva, Switzerland
J. Molson
LAL, Orsay, France
Y. Zou
IHEP, Beijing, People's Republic of China

SixTrack is a single particle tracking code for simulating beam dynamics in ultra-relativistic accelerators. It is widely used at the European Organisation for Nuclear Research (CERN) for predicting dynamic aperture and cleaning inefficiency in large circular machines like the Super Proton Synchrotron (SPS), the Large Hadron Collider (LHC) and the Future Circular Collider (FCC). The code is under continuous development, to both extend its physics models, and enhance performance. The present work gives an overview of developments, specifically aimed at extending the code capabilities for cleaning studies. They mainly involve: the online aperture check; the possibility to perform simulations coupled to advanced Monte Carlo codes like Fluka or using the scattering event generator of the Merlin code; the generalisation of tracking maps to ion species; the implementation of composite materials of relevance for the future upgrades of the LHC collimators; the physics of interactions with bent crystals. Plans to merge these functionalities into a single version of the SixTrack code will be outlined.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-THPAB046

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)