IPAC2017 - List of Authors (Brovko, O.I.)

Paper	Title	Page
THPAB132	MCP Based Detectors Installation in European XFEL	4031
	E. Syresin, O.I. Brovko, A.Yu. Grebentsov JINR, Dubna, Moscow Region, Russia W. Freund XFEL. EU, Hamburg, Germany J. Grünert European XFEL, Schenefeld, Germany M.V. Yurkov DESY, Hamburg, Germany
	An important task of the photon beam diagnostics at the European XFEL is providing reliable tools for measurements aiming at the search for and fine tuning of the amplification process in the SASE FEL. Radiation detectors based onμchannel plates (MCP) were prepared for such measurements. These detectors operate in a wide dynamic range from the level of spontaneous emission to the saturation level (between a few nJ to 25 mJ), and in a wide wavelength range from 0.05 nm to 0.4 nm for SASE1 and SASE2, and from 0.4 nm to 5.1 nm for SASE3. Photon pulse energies are measured at the MCP anode and with a photodiode. The transverse photon beam profile is measured by an MCP imager with phosphor screen anode. Three MCP devices are being installed, one in each of the three FEL beamlines (SASE1, SASE2, and SASE3). The units for SASE1 and SASE3 were already installed in the XFEL tunnel, and the technical commissioning of the MCP detectors and their electronics is progressing. Calibration and acceptance test experiments with beam are scheduled for early 2017.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-THPAB132
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

MCP Based Detectors Installation in European XFEL

4031

E. Syresin, O.I. Brovko, A.Yu. Grebentsov
JINR, Dubna, Moscow Region, Russia
W. Freund
XFEL. EU, Hamburg, Germany
J. Grünert
European XFEL, Schenefeld, Germany
M.V. Yurkov
DESY, Hamburg, Germany

An important task of the photon beam diagnostics at the European XFEL is providing reliable tools for measurements aiming at the search for and fine tuning of the amplification process in the SASE FEL. Radiation detectors based onμchannel plates (MCP) were prepared for such measurements. These detectors operate in a wide dynamic range from the level of spontaneous emission to the saturation level (between a few nJ to 25 mJ), and in a wide wavelength range from 0.05 nm to 0.4 nm for SASE1 and SASE2, and from 0.4 nm to 5.1 nm for SASE3. Photon pulse energies are measured at the MCP anode and with a photodiode. The transverse photon beam profile is measured by an MCP imager with phosphor screen anode. Three MCP devices are being installed, one in each of the three FEL beamlines (SASE1, SASE2, and SASE3). The units for SASE1 and SASE3 were already installed in the XFEL tunnel, and the technical commissioning of the MCP detectors and their electronics is progressing. Calibration and acceptance test experiments with beam are scheduled for early 2017.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-THPAB132

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)