Author: Badano, L.
Paper Title Page
WEPAB034 Control of Seeded FEL Pulse Duration Using Laser Heater Pulse Shaping 2654
 
  • V. Grattoni
    Università degli Studi di Trieste, Trieste, Italy
  • E. Allaria, L. Badano, M.B. Danailov, A.A. Demidovich, S. Di Mitri, L. Giannessi, G. Penco, E. Roussel, P. Sigalotti, S. Spampinati, M. Trovò, M. Veronese
    Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy
  • E. Ferrari
    PSI, Villigen PSI, Switzerland
 
  New Free-Electron Laser facilities deliver VUV and X-ray radiation with pulse length in the range of hundreds and tens of fs. A further reduction of the FEL pulse length is desired by those experiments aiming at probing ultrafast phenomena. Unlike SASE FEL, where the pulse duration is mainly driven by the electron bunch duration, in a seeded FEL the pulse duration can be determined by the seed laser properties. The use of techniques able to locally deteriorate the electron beam properties such as emittance or energy spread have been used in SASE FELs to reduce the region of the electron beam that is able to produce FEL radiation and hence reduce the FEL pulse length. The temporal shaping of the laser heater can be used to create an electron beam characterized by a very large energy spread all along the bunch except for a small region. We report measurements of the effect of the laser heater shaping on the electron beam phase-space performed at FERMI. Impact on the final FEL pulse properties are predicted with a series of numerical simulations.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-WEPAB034  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEPAB039 Development Perspectives at FERMI 2666
 
  • M. Svandrlik, E. Allaria, L. Badano, F. Bencivenga, C. Callegari, F. Capotondi, F. Cilento, P. Cinquegrana, M. Coreno, I. Cudin, G. D'Auria, M.B. Danailov, R. De Monte, G. De Ninno, P. Delgiusto, A.A. Demidovich, M. Di Fraia, S. Di Mitri, B. Diviacco, A. Fabris, R. Fabris, W.M. Fawley, M. Ferianis, P. Furlan Radivo, G. Gaio, D. Gauthier, F. Gelmetti, L. Giannessi, F. Iazzourene, S. Krecic, M. Lonza, N. Mahne, M. Malvestuto, C. Masciovecchio, M. Milloch, F. Parmigiani, G. Penco, A. Perucchi, L. Pivetta, O. Plekan, M. Predonzani, E. Principi, L. Raimondi, P. Rebernik Ribič, F. Rossi, E. Roussel, L. Rumiz, C. Scafuri, C. Serpico, P. Sigalotti, M. Trovò, A. Vascotto, M. Veronese, R. Visintini, D. Zangrando, M. Zangrando
    Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy
 
  FERMI is the seeded Free Electron Laser (FEL) user facility at the Elettra laboratory in Trieste, operating in the ultraviolet to soft X-rays spectral range; the radiation produced by the seeded FEL is characterized by a number of desirable properties, such as wavelength stability, low temporal jitter and longitudinal coherence. In this paper, after an overview of the FEL performances, we will present the development plans under consideration for the next 3 to 5 years. These include an upgrade of the linac and of the existing FEL lines, the possibility to perform multipulse experiments in different configurations and an Echo Enabled Harmonic Generation (EEHG) experiment on FEL-2, the FEL line extending to 4 nm (310 eV).  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-WEPAB039  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)