IPAC2017 - List of Authors (Andreazza, W.)

Paper	Title	Page
MOPAB121	Installation and Test of Pre-series Wire Scanners for the LHC Injector Upgrade Project at CERN	412
	R. Veness, P. Andersson, W. Andreazza, N. Chritin, B. Dehning, J. Emery, A. Goldblatt, D. Gudkov, F. Roncarolo, J.L. Sirvent, J. Tassan-Viol CERN, Geneva, Switzerland
	A new generation of fast wire scanners is being developed for the LHC Injectors Upgrade (LIU) project at CERN. These will be essential tools for transverse profile measurement with the higher brightness LIU beams, and are planned for installation in 2019 in all three synchrotrons making up the LHC injector chain. An active period of development and test has resulted in prototype installations in the SPS and PSB rings. This paper will summarise the design and report on the results to-date.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-MOPAB121
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEOAA2	Status of Radioactive Ion Beam Post-Acceleration at CERN-ISOLDE	2466
	Y. Kadi, W. Andreazza, J. Bauche, A. Behrens, A.P. Bernardes, J.A. Ferreira Somoza, F. Formenti, M.A. Fraser, M.J. Garcia Borge, N. Guillotin, K. Johnston, G. Kautzmann, Y. Leclercq, M. Martino, A. Miyazaki, R. Mompo, A. Papageorgiou Koufidou, O. Pirotte, J.A. Rodriguez, S. Sadovich, E. Siesling, M. Therasse, D. Valuch, W. Venturini Delsolaro CERN, Geneva, Switzerland
	Funding: We acknowledge funding from the Belgian Big Science program of the FWO (Research Foundation Flanders) and the Research Council K.U. Leuven. The HIE-ISOLDE project* (High Intensity and Energy ISOLDE) reached an important milestone in September 2016 when the first physics run was carried out with radioactive beams at 6 MV/m. This is the first stage in the upgrade of the REX post-accelerator, whereby the energy of the radioactive ion beams was increased from 3 to 5.5 MeV per nucleon. The facility will ultimately be equipped with four high-beta cryomodule that will accelerate the beams up to 10 MeV per nucleon for the heaviest isotopes available at ISOLDE. The first 2 cryomodules of the new linac, hosting each five superconducting cavities and one solenoid, were commissioned in August 2016. Besides demonstrating the experimental capabilities of the facility, this successful first run validated the technical choices of the HIE ISOLDE team and provided a fitting reward for eight years of rigorous R&D efforts. At the start of 2018, HIE-ISOLDE is expected to complete the energy upgrade, reaching 10 MeV/u and becoming an attractive facility for a wide variety of experiments. This contribution will focus on the results of the commissioning and on the main technical issues that were highlighted. * M.J.G. Borge and K. Riisager (2016), HIE-ISOLDE, the project and the physics opportunities, European Physical Journal A 52: 334, DOI: 10.1140/epja/i2016-16334-4
	Slides WEOAA2 [7.659 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-WEOAA2
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Installation and Test of Pre-series Wire Scanners for the LHC Injector Upgrade Project at CERN

412

R. Veness, P. Andersson, W. Andreazza, N. Chritin, B. Dehning, J. Emery, A. Goldblatt, D. Gudkov, F. Roncarolo, J.L. Sirvent, J. Tassan-Viol
CERN, Geneva, Switzerland

A new generation of fast wire scanners is being developed for the LHC Injectors Upgrade (LIU) project at CERN. These will be essential tools for transverse profile measurement with the higher brightness LIU beams, and are planned for installation in 2019 in all three synchrotrons making up the LHC injector chain. An active period of development and test has resulted in prototype installations in the SPS and PSB rings. This paper will summarise the design and report on the results to-date.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-MOPAB121

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEOAA2

Status of Radioactive Ion Beam Post-Acceleration at CERN-ISOLDE

2466

Y. Kadi, W. Andreazza, J. Bauche, A. Behrens, A.P. Bernardes, J.A. Ferreira Somoza, F. Formenti, M.A. Fraser, M.J. Garcia Borge, N. Guillotin, K. Johnston, G. Kautzmann, Y. Leclercq, M. Martino, A. Miyazaki, R. Mompo, A. Papageorgiou Koufidou, O. Pirotte, J.A. Rodriguez, S. Sadovich, E. Siesling, M. Therasse, D. Valuch, W. Venturini Delsolaro
CERN, Geneva, Switzerland

Funding: We acknowledge funding from the Belgian Big Science program of the FWO (Research Foundation Flanders) and the Research Council K.U. Leuven.
The HIE-ISOLDE project* (High Intensity and Energy ISOLDE) reached an important milestone in September 2016 when the first physics run was carried out with radioactive beams at 6 MV/m. This is the first stage in the upgrade of the REX post-accelerator, whereby the energy of the radioactive ion beams was increased from 3 to 5.5 MeV per nucleon. The facility will ultimately be equipped with four high-beta cryomodule that will accelerate the beams up to 10 MeV per nucleon for the heaviest isotopes available at ISOLDE. The first 2 cryomodules of the new linac, hosting each five superconducting cavities and one solenoid, were commissioned in August 2016. Besides demonstrating the experimental capabilities of the facility, this successful first run validated the technical choices of the HIE ISOLDE team and provided a fitting reward for eight years of rigorous R&D efforts. At the start of 2018, HIE-ISOLDE is expected to complete the energy upgrade, reaching 10 MeV/u and becoming an attractive facility for a wide variety of experiments. This contribution will focus on the results of the commissioning and on the main technical issues that were highlighted.
* M.J.G. Borge and K. Riisager (2016), HIE-ISOLDE, the project and the physics opportunities, European Physical Journal A 52: 334, DOI: 10.1140/epja/i2016-16334-4

Slides WEOAA2 [7.659 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-WEOAA2

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)