IPAC2016 - List of Authors (Stoupin, S.)

Paper	Title	Page
MOPOW039	An Oscillator Configuration for Full Realization of Hard X-ray Free Electron Laser	801
	K.-J. Kim, T. Kolodziej, R.R. Lindberg, D. Shu, Yu. Shvyd'ko, S. Stoupin ANL, Argonne, Ilinois, USA V.D. Blank, S. Terentiev TISNCM, Troitsk, Russia Y. Ding, W.M. Fawley, J.B. Hastings, Z. Huang, J. Krzywinski, G. Marcus, T.J. Maxwell SLAC, Menlo Park, California, USA N.A. Medvedev CFEL, Hamburg, Germany W. Qin PKU, Beijing, People's Republic of China J. Zemella DESY, Hamburg, Germany
	Funding: Work at ANL supported under US Department of Energy contract DE-AC02-76SF00515 and at SLAC by the U.S. Department of Energy, Office of Science, under Contract No. DE-ACO2-O6CH11357 An X-ray free electron laser can be built in an oscillator (XFELO) configuration by employing an X-ray cavity with Bragg mirrors such as diamond. An XFELO at the 5th harmonic frequency may be implemented at the LCLS II using its 4 GeV superconducting linac. The XFELO will provide stable, coherent, high-spectral-purity hard x-rays. In addition, portions of its output may be enhanced by the LCLS amplifier for stable pulses of ultrashort duration determined by the electron bunch length. Much progress has been made recently on the feasibility of an XFELO: Analytical and numerical methods have been developed to compute the performance of a harmonic XFELO. The energy spread requirement over a sufficient length of the bunch can be met by temporal shaping of the photo-cathode drive laser. Experiments at the APS have shown that Be-compound refractive lenses are suitable for a low-loss focusing and that the synthetic diamond crystals can withstand the intense x-ray exposure, in accord with estimates based on molecular dynamics considerations. A strain-free mounting of thin diamond crystal (< 100 microns) can be realized by shaping a thick diamond into a blind alley*. R. R. Lindberg et al., PRSTAB 1010701 (2011) W. Qin et al., this conference * N. Medvedev et al., Phys. Rev. B 88, 224304 (2013) **** S. Terentyev, private communication
DOI •	reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-MOPOW039
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPMW041	Single Crystal Diamond X-ray Lens Development	3643
	S.P. Antipov, S.V. Baryshev, S. Baturin, R.A. Kostin Euclid TechLabs, LLC, Solon, Ohio, USA T.C. Irving, A. Olga CSSRI, Chicago, USA S. Stoupin ANL, Argonne, Ilinois, USA
	Funding: Phase I DOE SBIR The next generation light sources such as diffraction-limited storage rings and high repetition rate free electron lasers (FELs) will generate x-ray beams with significantly increased peak and average brilliance. These future facilities will require x-ray optical components capable of handling large instantaneous and average power densities while tailoring the properties of the x-ray beams for a variety of scientific experiments. In this paper we report on research and development of a single crystal diamond compound refractive lens. Diamond is the best material for high heat load applications. Moreover single crystal lens preserves coherence of the x-ray beam because scattering from grain boundaries, voids and impurities, typical for current beryllium lenses is minimized. A set of two-dimensional single crystal diamond lenses had been fabricated by fs-laser cutting and tested at Advanced Photon Source (Argonne).
DOI •	reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-THPMW041
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

An Oscillator Configuration for Full Realization of Hard X-ray Free Electron Laser

801

K.-J. Kim, T. Kolodziej, R.R. Lindberg, D. Shu, Yu. Shvyd'ko, S. Stoupin
ANL, Argonne, Ilinois, USA
V.D. Blank, S. Terentiev
TISNCM, Troitsk, Russia
Y. Ding, W.M. Fawley, J.B. Hastings, Z. Huang, J. Krzywinski, G. Marcus, T.J. Maxwell
SLAC, Menlo Park, California, USA
N.A. Medvedev
CFEL, Hamburg, Germany
W. Qin
PKU, Beijing, People's Republic of China
J. Zemella
DESY, Hamburg, Germany

Funding: Work at ANL supported under US Department of Energy contract DE-AC02-76SF00515 and at SLAC by the U.S. Department of Energy, Office of Science, under Contract No. DE-ACO2-O6CH11357
An X-ray free electron laser can be built in an oscillator (XFELO) configuration by employing an X-ray cavity with Bragg mirrors such as diamond*. An XFELO at the 5th harmonic frequency may be implemented at the LCLS II using its 4 GeV superconducting linac. The XFELO will provide stable, coherent, high-spectral-purity hard x-rays. In addition, portions of its output may be enhanced by the LCLS amplifier for stable pulses of ultrashort duration determined by the electron bunch length. Much progress has been made recently on the feasibility of an XFELO: Analytical and numerical methods have been developed to compute the performance of a harmonic XFELO. The energy spread requirement over a sufficient length of the bunch can be met by temporal shaping of the photo-cathode drive laser**. Experiments at the APS have shown that Be-compound refractive lenses are suitable for a low-loss focusing and that the synthetic diamond crystals can withstand the intense x-ray exposure, in accord with estimates based on molecular dynamics considerations***. A strain-free mounting of thin diamond crystal (< 100 microns) can be realized by shaping a thick diamond into a blind alley****.
* R. R. Lindberg et al., PRSTAB 1010701 (2011)
** W. Qin et al., this conference
*** N. Medvedev et al., Phys. Rev. B 88, 224304 (2013)
**** S. Terentyev, private communication

DOI •

reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-MOPOW039

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPMW041

Single Crystal Diamond X-ray Lens Development

3643

S.P. Antipov, S.V. Baryshev, S. Baturin, R.A. Kostin
Euclid TechLabs, LLC, Solon, Ohio, USA
T.C. Irving, A. Olga
CSSRI, Chicago, USA
S. Stoupin
ANL, Argonne, Ilinois, USA

Funding: Phase I DOE SBIR
The next generation light sources such as diffraction-limited storage rings and high repetition rate free electron lasers (FELs) will generate x-ray beams with significantly increased peak and average brilliance. These future facilities will require x-ray optical components capable of handling large instantaneous and average power densities while tailoring the properties of the x-ray beams for a variety of scientific experiments. In this paper we report on research and development of a single crystal diamond compound refractive lens. Diamond is the best material for high heat load applications. Moreover single crystal lens preserves coherence of the x-ray beam because scattering from grain boundaries, voids and impurities, typical for current beryllium lenses is minimized. A set of two-dimensional single crystal diamond lenses had been fabricated by fs-laser cutting and tested at Advanced Photon Source (Argonne).

DOI •

reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-THPMW041

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)