IPAC2016 - List of Authors (Schoerling, D.)

Paper	Title	Page
WEPMW002	A CLIC Damping Wiggler Prototype at ANKA: Commissioning and Preparations for a Beam Dynamics Experimental Program	2412
	A. Bernhard, S. Casalbuoni, S. Gerstl, J. Gethmann, A.W. Grau, E. Huttel, A.-S. Müller, D. Saez de Jauregui, N.J. Smale KIT, Eggenstein-Leopoldshafen, Germany A.V. Bragin, S.V. Khrushchev, N.A. Mezentsev, V.A. Shkaruba, V.M. Tsukanov, K. Zolotarev BINP SB RAS, Novosibirsk, Russia P. Ferracin, L. Garcia Fajardo, Y. Papaphilippou, H. Schmickler, D. Schoerling, P. Zisopoulos CERN, Geneva, Switzerland
	Funding: This work is partially funded by the German Federal Ministry of Education and Research under grant 05K12VK1 In a collaboration between CERN, BINP and KIT a prototype of a superconducting damping wiggler for the CLIC damping rings has been installed at the ANKA synchrotron light source. On the one hand, the foreseen experimental program aims at validating the technical design of the wiggler, particularly the conduction cooling concept applied in its cryostat design, in a long-term study. On the other hand, the wiggler's influence on the beam dynamics particularly in the presence of collective effects is planned to be investigated. ANKA's low-alpha short-bunch operation mode will serve as a model system for these studies on collective effects. To simulate these effects and to make verifiable predictions an accurate model of the ANKA storage ring in low-alpha mode, including the insertion devices is under parallel development. This contribution reports on the first operational experience with the CLIC damping wiggler prototype in the ANKA storage ring and steps towards the planned advanced experimental program with this device.
DOI •	reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-WEPMW002
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPOR050	New Working Point for CERN Proton Synchrotron	3905
	F. Sperati, A. Beaumont, S.S. Gilardoni, D. Schoerling, M. Serluca, G. Sterbini CERN, Geneva, Switzerland
	The LHC High-luminosity project requests high brightness and intensity beams from the CERN Proton Synchrotron (PS). The generation of such beams is limited due to resonance effects at injection. The impact of resonances can be minimized by performing appropriate correction with dedicated magnets and by optimizing the tune working point. Currently the tune working point at injection is naturally set by the quadrupolar component generated by the one hundred combined function normal conducting magnets installed in the PS, and slightly corrected by low energy quadrupole magnets. In this paper, a study is presented exploiting the use of the available five auxiliary individually powered circuits to adjust the quadrupolar and higher-order multipole components for changing the tune integer at injection. Due to the non-linear contribution of each circuit to the magnetic field distribution a finite-element magnetic model was prepared to predict the required currents in the auxiliary coils. The magnetic model was benchmarked with magnetic measurements and then tested in the PS machine during dedicated machine development times.
DOI •	reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-THPOR050
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

A CLIC Damping Wiggler Prototype at ANKA: Commissioning and Preparations for a Beam Dynamics Experimental Program

2412

A. Bernhard, S. Casalbuoni, S. Gerstl, J. Gethmann, A.W. Grau, E. Huttel, A.-S. Müller, D. Saez de Jauregui, N.J. Smale
KIT, Eggenstein-Leopoldshafen, Germany
A.V. Bragin, S.V. Khrushchev, N.A. Mezentsev, V.A. Shkaruba, V.M. Tsukanov, K. Zolotarev
BINP SB RAS, Novosibirsk, Russia
P. Ferracin, L. Garcia Fajardo, Y. Papaphilippou, H. Schmickler, D. Schoerling, P. Zisopoulos
CERN, Geneva, Switzerland

Funding: This work is partially funded by the German Federal Ministry of Education and Research under grant 05K12VK1
In a collaboration between CERN, BINP and KIT a prototype of a superconducting damping wiggler for the CLIC damping rings has been installed at the ANKA synchrotron light source. On the one hand, the foreseen experimental program aims at validating the technical design of the wiggler, particularly the conduction cooling concept applied in its cryostat design, in a long-term study. On the other hand, the wiggler's influence on the beam dynamics particularly in the presence of collective effects is planned to be investigated. ANKA's low-alpha short-bunch operation mode will serve as a model system for these studies on collective effects. To simulate these effects and to make verifiable predictions an accurate model of the ANKA storage ring in low-alpha mode, including the insertion devices is under parallel development. This contribution reports on the first operational experience with the CLIC damping wiggler prototype in the ANKA storage ring and steps towards the planned advanced experimental program with this device.

DOI •

reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-WEPMW002

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPOR050

New Working Point for CERN Proton Synchrotron

3905

F. Sperati, A. Beaumont, S.S. Gilardoni, D. Schoerling, M. Serluca, G. Sterbini
CERN, Geneva, Switzerland

The LHC High-luminosity project requests high brightness and intensity beams from the CERN Proton Synchrotron (PS). The generation of such beams is limited due to resonance effects at injection. The impact of resonances can be minimized by performing appropriate correction with dedicated magnets and by optimizing the tune working point. Currently the tune working point at injection is naturally set by the quadrupolar component generated by the one hundred combined function normal conducting magnets installed in the PS, and slightly corrected by low energy quadrupole magnets. In this paper, a study is presented exploiting the use of the available five auxiliary individually powered circuits to adjust the quadrupolar and higher-order multipole components for changing the tune integer at injection. Due to the non-linear contribution of each circuit to the magnetic field distribution a finite-element magnetic model was prepared to predict the required currents in the auxiliary coils. The magnetic model was benchmarked with magnetic measurements and then tested in the PS machine during dedicated machine development times.

DOI •

reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-THPOR050

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)