IPAC2016 - List of Authors (Schiffer, T.)

Paper	Title	Page
THPOW029	Single Electron Extraction at the ELSA Detector Test Beamline	4002
	F. Frommberger, N. Heurich, W. Hillert, T. Schiffer, M.T. Switka ELSA, Bonn, Germany
	The Electron pulse Stretcher Facility ELSA delivers polarized and non-polarized electrons with an adjustable beam energy of 0.5 - 3.2 GeV to external experimental stations. Extraction currents available range down from 1 nanoampere to several atto-amperes provided by single electron extraction. Especially the high energy physics community requires detector test stations with electron tagging rates between 100 Hz to 100 kHz, imposing particular requirements for stable minimum-current extraction from the storage ring. These requirements are met with the implementation of a low-injection mode for the booster synchrotron and photomultiplier-based stored current monitoring, providing feedback for a selectable limit of the injected current. A homogeneous extraction current with duty factor > 80% is routinely granted by the excitation of a 3rd integer optical resonance. The setup of the low-current injection system and measurements of the extraction properties at the preliminary detector test beamline are presented.
DOI •	reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-THPOW029
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Single Electron Extraction at the ELSA Detector Test Beamline

4002

F. Frommberger, N. Heurich, W. Hillert, T. Schiffer, M.T. Switka
ELSA, Bonn, Germany

The Electron pulse Stretcher Facility ELSA delivers polarized and non-polarized electrons with an adjustable beam energy of 0.5 - 3.2 GeV to external experimental stations. Extraction currents available range down from 1 nanoampere to several atto-amperes provided by single electron extraction. Especially the high energy physics community requires detector test stations with electron tagging rates between 100 Hz to 100 kHz, imposing particular requirements for stable minimum-current extraction from the storage ring. These requirements are met with the implementation of a low-injection mode for the booster synchrotron and photomultiplier-based stored current monitoring, providing feedback for a selectable limit of the injected current. A homogeneous extraction current with duty factor > 80% is routinely granted by the excitation of a 3rd integer optical resonance. The setup of the low-current injection system and measurements of the extraction properties at the preliminary detector test beamline are presented.

DOI •

reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-THPOW029

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)