IPAC2016 - List of Authors (Sabounchi, S.)

Paper	Title	Page
TUPMR013	Heat Transfer Study of PIG Ion Source for 10 MeV Cyclotron	1256
	F. Zakerhosseini, H. Afarideh, S. Sabounchi AUT, Tehran, Iran J.-S. Chai, M. Ghergherehchi SKKU, Suwon, Republic of Korea
	A PIG Ion source provides H-ions for the 10 MeV cyclotron, which is designed and being manufactured by Amirkabir university of technology. Plasma created in the anode contains the desired ions. Discharge for producing plasma consists of the both ion current from plasma towards the cathode and the secondary electron current from the cathode to the plasma. Secondary electron emission is the result of ion collision on the surface of the cathode. Heat generated by these collisions is considerably high, so a cooling system for ion source is crucial. In this paper heat transfer study of the ion source, temperature distribution and deformation of different parts simulated using ANSYS CFX. Also the thermionic emission of the electrons from cathode in the calculated temperatures by ANSYS simulated Using CST STUDIO. Results showed the maximum temperature of the cathodes is 1992 K, which is far away from the cathode melting point. The thermionic current in 1992 K of cathode simulated and the results showed an electron current of 0.00706 A at 500 V which is negligible in comparison to the discharge current of 1 A. Maximum deformation were about 0.2 mm in cathode edges.
DOI •	reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-TUPMR013
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPMR015	Cooling and Heat Transfer of the IRANCYC-10 Transmission Line	1259
	S. Sabounchi, H. Afarideh, M. Mohamadian, M. Salehi AUT, Tehran, Iran J.-S. Chai, M. Ghergherehchi SKKU, Suwon, Republic of Korea
	Heat transfer study for designing RF transmission line in cyclotrons is crucial. Because of enormous amount of surface current on RF transmission line, despite high conductivity of copper, significant amount of heat is being generated, which is enough for altering characteristic impedance and other desirable parameters for transmission line. So, effective cooling system which is nourished by central chiller system is essential. For design of cooling system in RF transmission line suitable mass flow, appropriate geometry and confined temperatures are prominent in order to avoid eroding and impedance changing. In this paper an attempt has been done for accurate analyzing and simulating of heat transfer phenomenon for the 10MeV cyclotron (IRANCYC-10 ) which is under construction at AmirKabir University of Technology. By using Ansys CFX simulation software, the optimum cooling line geometry and mass flow rate of 90 gr/s for cooling water, has been resulted.
DOI •	reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-TUPMR015
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Heat Transfer Study of PIG Ion Source for 10 MeV Cyclotron

1256

F. Zakerhosseini, H. Afarideh, S. Sabounchi
AUT, Tehran, Iran
J.-S. Chai, M. Ghergherehchi
SKKU, Suwon, Republic of Korea

A PIG Ion source provides H-ions for the 10 MeV cyclotron, which is designed and being manufactured by Amirkabir university of technology. Plasma created in the anode contains the desired ions. Discharge for producing plasma consists of the both ion current from plasma towards the cathode and the secondary electron current from the cathode to the plasma. Secondary electron emission is the result of ion collision on the surface of the cathode. Heat generated by these collisions is considerably high, so a cooling system for ion source is crucial. In this paper heat transfer study of the ion source, temperature distribution and deformation of different parts simulated using ANSYS CFX. Also the thermionic emission of the electrons from cathode in the calculated temperatures by ANSYS simulated Using CST STUDIO. Results showed the maximum temperature of the cathodes is 1992 K, which is far away from the cathode melting point. The thermionic current in 1992 K of cathode simulated and the results showed an electron current of 0.00706 A at 500 V which is negligible in comparison to the discharge current of 1 A. Maximum deformation were about 0.2 mm in cathode edges.

DOI •

reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-TUPMR013

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPMR015

Cooling and Heat Transfer of the IRANCYC-10 Transmission Line

1259

S. Sabounchi, H. Afarideh, M. Mohamadian, M. Salehi
AUT, Tehran, Iran
J.-S. Chai, M. Ghergherehchi
SKKU, Suwon, Republic of Korea

Heat transfer study for designing RF transmission line in cyclotrons is crucial. Because of enormous amount of surface current on RF transmission line, despite high conductivity of copper, significant amount of heat is being generated, which is enough for altering characteristic impedance and other desirable parameters for transmission line. So, effective cooling system which is nourished by central chiller system is essential. For design of cooling system in RF transmission line suitable mass flow, appropriate geometry and confined temperatures are prominent in order to avoid eroding and impedance changing. In this paper an attempt has been done for accurate analyzing and simulating of heat transfer phenomenon for the 10MeV cyclotron (IRANCYC-10 ) which is under construction at AmirKabir University of Technology. By using Ansys CFX simulation software, the optimum cooling line geometry and mass flow rate of 90 gr/s for cooling water, has been resulted.

DOI •

reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-TUPMR015

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)