IPAC2016 - List of Authors (Reinap, A.)

Paper	Title	Page
THPMW027	Development of a Long Pulse High Power Klystron Modulator for the ESS Linac based on the Stacked Multi-level Topology	3600
	C.A. Martins ESS, Lund, Sweden M. Collins, A. Reinap Lund Technical University, Lund, Sweden
	A novel Stacked Multi-Level modulator topology optimized for long pulse and high average power applications has been developed at ESS. It utilizes six identical modules connected in series at the HV output side and fed in parallel from the low voltage side. Each one is formed by one HF inverter, one step-up transformer, one HV rectifier bridge and one HV passive filter. They are supplied in groups of two from three capacitor banks which in turn will be charged from the low voltage electrical grid by using three groups of active AC/DC and DC/DC converters. Industrial standard power electronic components are used at the primary stage, which are placed in conventional electrical cabinets. Only few special components (transformers, rectifiers, filters) are required to be placed in an oil tank. A technology demonstrator rated for 115kV/20A and 3.5ms/14Hz is at the final phase of construction. The main power conversion circuit and regulation principles will be described and details on the design and construction of the main sub-systems will be given. Simulation and experimental results will be given showing the achieved performance in terms of HV pulse quality and AC grid power quality
DOI •	reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-THPMW027
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Development of a Long Pulse High Power Klystron Modulator for the ESS Linac based on the Stacked Multi-level Topology

3600

C.A. Martins
ESS, Lund, Sweden
M. Collins, A. Reinap
Lund Technical University, Lund, Sweden

A novel Stacked Multi-Level modulator topology optimized for long pulse and high average power applications has been developed at ESS. It utilizes six identical modules connected in series at the HV output side and fed in parallel from the low voltage side. Each one is formed by one HF inverter, one step-up transformer, one HV rectifier bridge and one HV passive filter. They are supplied in groups of two from three capacitor banks which in turn will be charged from the low voltage electrical grid by using three groups of active AC/DC and DC/DC converters. Industrial standard power electronic components are used at the primary stage, which are placed in conventional electrical cabinets. Only few special components (transformers, rectifiers, filters) are required to be placed in an oil tank. A technology demonstrator rated for 115kV/20A and 3.5ms/14Hz is at the final phase of construction. The main power conversion circuit and regulation principles will be described and details on the design and construction of the main sub-systems will be given. Simulation and experimental results will be given showing the achieved performance in terms of HV pulse quality and AC grid power quality

DOI •

reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-THPMW027

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)