IPAC2016 - List of Authors (Quigley, P.)

Paper	Title	Page
WEPMR018	Time Resolved Cryogenic Cooling Analysis of the Cornell Injector Cryomodule	2298
	R.G. Eichhorn, A.C. Bartnik, B.M. Dunham, G.M. Ge, G.H. Hoffstaetter, H. Lee, M. Liepe, S.R. Markham, T.I. O'Connell, P. Quigley, D.M. Sabol, J. Sears, E.N. Smith, V. Veshcherevich Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA
	To demonstrate key parameters of a an energy recovery linac (ERL) at Cornel, an injector based on a photo gun and an SRF cryomodule was designed and built. The goal was to demonstrate high current generation while achieving low emittances. While the emittance goal has been reached, the current achieved so far is 75 mA. Even though this is a world record, it is still below the targeted 100 mA. While ramping up the current we observed excessive heating in the fundamental power coupler which we were able to track down to insufficient cooling of the 80 K intercepts. These intercepts are cooled by a stream of parallel cryogenic flows which we found to be unbalanced. In this paper we will review the finding, describe the analysis we did, modeling of the parallel flow and the modifications made to the module to overcome the heating.
DOI •	reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-WEPMR018
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMR020	First Cool-down of the Cornell ERL Main Linac Cryo-Module	2305
	R.G. Eichhorn, J.V. Conway, F. Furuta, G.M. Ge, D. Gonnella, T. Gruber, G.H. Hoffstaetter, J.J. Kaufman, M. Liepe, T.I. O'Connell, P. Quigley, D.M. Sabol, J. Sears, E.N. Smith, V. Veshcherevich Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA
	Cornell University has finished building a 10 m long superconducting accelerator module as a prototype of the main linac of a proposed ERL facility. This module houses 6 superconducting cavities- operated at 1.8 K in continuous wave (CW) mode with a design field of 16 MV/m and a Quality factor of 2x10¹⁰. We wil shortly review the design and focus on reporting on the first cool-down of this module. We will giving data for various cool-down scenarios (fast/ slow), uniformity and performance
DOI •	reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-WEPMR020
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMR021	HOM Measurements for Cornell's High-current CW ERL Cryomodule	2309
	F. Furuta, R.G. Eichhorn, G.M. Ge, D. Gonnella, G.H. Hoffstaetter, M. Liepe, P. Quigley, V. Veshcherevich Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA
	The main linac cryomodule (MLC) for the future energy-recovery linac (ERL) based synchrotron-light facility at Cornell had been designed, fabricated, and tested. It houses 6 SRF cavities with individual higher order-modes (HOMs)absorbers and one magnet/ BPM section. We will report the HOM study on MLC.
DOI •	reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-WEPMR021
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMR022	ERL Main Linac Cryomodule Cavity Performance and Effect of Thermal Cycling	2312
	F. Furuta, J. Dobbins, R.G. Eichhorn, G.M. Ge, D. Gonnella, G.H. Hoffstaetter, M. Liepe, T.I. O'Connell, P. Quigley, D.M. Sabol, J. Sears, E.N. Smith, V. Veshcherevich Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA
	Cornell has designed, fabricated, and tested a high current (100 mA) CW SRF prototype cryomodule for the future energy-recovery linac (ERL) based synchrotron-light facility at Cornell . It houses six 7-cell SRF cavities with individual HOM absorbers and one magnet/ BPM section. Cavities are targeted to operate with high Qo of 2.0·10¹⁰ at 16.2 MV/m, 1.8 K in continuous wave (CW) mode. We will report the RF test results of 7-cell cavities in this cryomodule after initial cooldown and several thermal cycles with different cooldown method.
DOI •	reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-WEPMR022
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Time Resolved Cryogenic Cooling Analysis of the Cornell Injector Cryomodule

2298

R.G. Eichhorn, A.C. Bartnik, B.M. Dunham, G.M. Ge, G.H. Hoffstaetter, H. Lee, M. Liepe, S.R. Markham, T.I. O'Connell, P. Quigley, D.M. Sabol, J. Sears, E.N. Smith, V. Veshcherevich
Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA

To demonstrate key parameters of a an energy recovery linac (ERL) at Cornel, an injector based on a photo gun and an SRF cryomodule was designed and built. The goal was to demonstrate high current generation while achieving low emittances. While the emittance goal has been reached, the current achieved so far is 75 mA. Even though this is a world record, it is still below the targeted 100 mA. While ramping up the current we observed excessive heating in the fundamental power coupler which we were able to track down to insufficient cooling of the 80 K intercepts. These intercepts are cooled by a stream of parallel cryogenic flows which we found to be unbalanced. In this paper we will review the finding, describe the analysis we did, modeling of the parallel flow and the modifications made to the module to overcome the heating.

DOI •

reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-WEPMR018

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMR020

First Cool-down of the Cornell ERL Main Linac Cryo-Module

2305

R.G. Eichhorn, J.V. Conway, F. Furuta, G.M. Ge, D. Gonnella, T. Gruber, G.H. Hoffstaetter, J.J. Kaufman, M. Liepe, T.I. O'Connell, P. Quigley, D.M. Sabol, J. Sears, E.N. Smith, V. Veshcherevich
Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA

Cornell University has finished building a 10 m long superconducting accelerator module as a prototype of the main linac of a proposed ERL facility. This module houses 6 superconducting cavities- operated at 1.8 K in continuous wave (CW) mode with a design field of 16 MV/m and a Quality factor of 2x10¹⁰. We wil shortly review the design and focus on reporting on the first cool-down of this module. We will giving data for various cool-down scenarios (fast/ slow), uniformity and performance

DOI •

reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-WEPMR020

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMR021

HOM Measurements for Cornell's High-current CW ERL Cryomodule

2309

F. Furuta, R.G. Eichhorn, G.M. Ge, D. Gonnella, G.H. Hoffstaetter, M. Liepe, P. Quigley, V. Veshcherevich
Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA

The main linac cryomodule (MLC) for the future energy-recovery linac (ERL) based synchrotron-light facility at Cornell had been designed, fabricated, and tested. It houses 6 SRF cavities with individual higher order-modes (HOMs)absorbers and one magnet/ BPM section. We will report the HOM study on MLC.

DOI •

reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-WEPMR021

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMR022

ERL Main Linac Cryomodule Cavity Performance and Effect of Thermal Cycling

2312

F. Furuta, J. Dobbins, R.G. Eichhorn, G.M. Ge, D. Gonnella, G.H. Hoffstaetter, M. Liepe, T.I. O'Connell, P. Quigley, D.M. Sabol, J. Sears, E.N. Smith, V. Veshcherevich
Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA

Cornell has designed, fabricated, and tested a high current (100 mA) CW SRF prototype cryomodule for the future energy-recovery linac (ERL) based synchrotron-light facility at Cornell . It houses six 7-cell SRF cavities with individual HOM absorbers and one magnet/ BPM section. Cavities are targeted to operate with high Qo of 2.0·10¹⁰ at 16.2 MV/m, 1.8 K in continuous wave (CW) mode. We will report the RF test results of 7-cell cavities in this cryomodule after initial cooldown and several thermal cycles with different cooldown method.

DOI •

reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-WEPMR022

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)