IPAC2016 - List of Authors (Phillips, G.)

Paper	Title	Page
WEPMR045	Engineering Issues of the Medium Energy Beam Transport Line and SRF Linac for the LIPAc	2377
	D. Gex, H. Dzitko, A. Lo Bue, G. Phillips, L. Semeraro, J.M. Zarzalejos F4E, Barcelona, Spain N. Bazin, G. Devanz, P. Hardy CEA/IRFU, Gif-sur-Yvette, France J. Castellanos, J.M. García, D. Jiménez-Rey, D. López, L.M. Martínez, I. Podadera CIEMAT, Madrid, Spain O. Nomen IREC, Sant Adria del Besos, Spain F. Scantamburlo IFMIF/EVEDA, Rokkasho, Japan
	The International Fusion Materials Irradiation Facility (IFMIF) aims to provide an accelerator-based, D-Li neutron source to produce high energy neutrons at sufficient intensity and irradiation volume for DEMO materials qualification. Part of the Broader Approach (BA) agreement between Japan and EURATOM, the goal of the IFMIF/EVEDA project is to work on the engineering design of IFMIF and to validate the main technological challenges which, among a wide diversity of hardware includes the LIPAC (Linear IFMIF Prototype Accelerator), a 125 mA CW deuteron accelerator up to 9 MeV mainly designed and manufactured in Europe. The aim of this paper is to address the engineering issues of the MEBT and SRF linac related to assembly and Integration at LIPAc facility, focusing in the seismic analysis of the beamlines to ensure the robustness of the equipment and the alignment activities with the cutting edge technology performed in Europe before sending the components to Rokkasho. These activities are essential before starting the installation process of the MEBT in the first half of 2016, and to initiate the assembly and integration of the SRF Linac cryomodule in the next phase.
DOI •	reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-WEPMR045
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMY033	Intermediate Commissioning Results of the 70 mA/50 keV H⁺ and 140 mA/100 keV D⁺ ECR Injector of IFMIF/LIPAC	2625
	B. Bolzon, N. Chauvin, S. Chel, R. Gobin, F. Harrault, F. Senée, M. Valette CEA/DSM/IRFU, France J.M. Ayala, J. Knaster, A. Marqueta, K. Nishiyama, Y. Okumura, M. Perez, G. Pruneri, F. Scantamburlo IFMIF/EVEDA, Rokkasho, Japan P.-Y. Beauvais, H. Dzitko, D. Gex, G. Phillips F4E, Germany L. Bellan Univ. degli Studi di Padova, Padova, Italy L. Bellan, M. Comunian, E. Fagotti, F. Grespan, A. Pisent INFN/LNL, Legnaro (PD), Italy P. Cara, R. Heidinger Fusion for Energy, Garching, Germany R. Ichimiya, A. Ihara, Y. Ikeda, A. Kasugai, T. Kikuchi, T. Kitano, M. Komata, K. Kondo, S. Maebara, S. O'hira, M. Sugimoto, H. Takahashi, H. Usami JAEA, Aomori, Japan K. Sakamoto QST, Aomori, Japan K. Shinto Japan Atomic Energy Agency (JAEA), International Fusion Energy Research Center (IFERC), Rokkasho, Kamikita, Aomori, Japan
	The LIPAc accelerator aims to operate 125 mA/CW deuteron beam at 9 MeV to validate IFMIF's accelerators that will operate in CW 125 mA at 40 MeV. The different subsystems of LIPAc have been designed and constructed mainly by European labs and are being installed and commissioned in Rokkasho Fusion Center. The 2.45 GHz ECR injector developed by CEA-Saclay is designed to deliver 140 mA/100 keV CW D⁺ beam with 99% gas fraction ratio. Its LEBT presents a dual solenoid focusing system to transport and match the beam into the RFQ. Its commissioning continues in 2016 in parallel with the RFQ installation. The normalized RMS emittance at the RFQ injection cone is to be within 0.25π mm·mrad to allow 96% transmission through the 9.81 m long RFQ. In order to avoid activation during commissioning, an equal perveance H⁺ beam of half current and half energy as nominal with deuterons is used. In this article, the commissioning results with 110 mA/100 keV D⁺ beam and 55 mA/50 keV H⁺ beam are first reported.
DOI •	reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-WEPMY033
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Engineering Issues of the Medium Energy Beam Transport Line and SRF Linac for the LIPAc

2377

D. Gex, H. Dzitko, A. Lo Bue, G. Phillips, L. Semeraro, J.M. Zarzalejos
F4E, Barcelona, Spain
N. Bazin, G. Devanz, P. Hardy
CEA/IRFU, Gif-sur-Yvette, France
J. Castellanos, J.M. García, D. Jiménez-Rey, D. López, L.M. Martínez, I. Podadera
CIEMAT, Madrid, Spain
O. Nomen
IREC, Sant Adria del Besos, Spain
F. Scantamburlo
IFMIF/EVEDA, Rokkasho, Japan

The International Fusion Materials Irradiation Facility (IFMIF) aims to provide an accelerator-based, D-Li neutron source to produce high energy neutrons at sufficient intensity and irradiation volume for DEMO materials qualification. Part of the Broader Approach (BA) agreement between Japan and EURATOM, the goal of the IFMIF/EVEDA project is to work on the engineering design of IFMIF and to validate the main technological challenges which, among a wide diversity of hardware includes the LIPAC (Linear IFMIF Prototype Accelerator), a 125 mA CW deuteron accelerator up to 9 MeV mainly designed and manufactured in Europe. The aim of this paper is to address the engineering issues of the MEBT and SRF linac related to assembly and Integration at LIPAc facility, focusing in the seismic analysis of the beamlines to ensure the robustness of the equipment and the alignment activities with the cutting edge technology performed in Europe before sending the components to Rokkasho. These activities are essential before starting the installation process of the MEBT in the first half of 2016, and to initiate the assembly and integration of the SRF Linac cryomodule in the next phase.

DOI •

reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-WEPMR045

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMY033

Intermediate Commissioning Results of the 70 mA/50 keV H⁺ and 140 mA/100 keV D⁺ ECR Injector of IFMIF/LIPAC

2625

B. Bolzon, N. Chauvin, S. Chel, R. Gobin, F. Harrault, F. Senée, M. Valette
CEA/DSM/IRFU, France
J.M. Ayala, J. Knaster, A. Marqueta, K. Nishiyama, Y. Okumura, M. Perez, G. Pruneri, F. Scantamburlo
IFMIF/EVEDA, Rokkasho, Japan
P.-Y. Beauvais, H. Dzitko, D. Gex, G. Phillips
F4E, Germany
L. Bellan
Univ. degli Studi di Padova, Padova, Italy
L. Bellan, M. Comunian, E. Fagotti, F. Grespan, A. Pisent
INFN/LNL, Legnaro (PD), Italy
P. Cara, R. Heidinger
Fusion for Energy, Garching, Germany
R. Ichimiya, A. Ihara, Y. Ikeda, A. Kasugai, T. Kikuchi, T. Kitano, M. Komata, K. Kondo, S. Maebara, S. O'hira, M. Sugimoto, H. Takahashi, H. Usami
JAEA, Aomori, Japan
K. Sakamoto
QST, Aomori, Japan
K. Shinto
Japan Atomic Energy Agency (JAEA), International Fusion Energy Research Center (IFERC), Rokkasho, Kamikita, Aomori, Japan

The LIPAc accelerator aims to operate 125 mA/CW deuteron beam at 9 MeV to validate IFMIF's accelerators that will operate in CW 125 mA at 40 MeV. The different subsystems of LIPAc have been designed and constructed mainly by European labs and are being installed and commissioned in Rokkasho Fusion Center. The 2.45 GHz ECR injector developed by CEA-Saclay is designed to deliver 140 mA/100 keV CW D⁺ beam with 99% gas fraction ratio. Its LEBT presents a dual solenoid focusing system to transport and match the beam into the RFQ. Its commissioning continues in 2016 in parallel with the RFQ installation. The normalized RMS emittance at the RFQ injection cone is to be within 0.25π mm·mrad to allow 96% transmission through the 9.81 m long RFQ. In order to avoid activation during commissioning, an equal perveance H⁺ beam of half current and half energy as nominal with deuterons is used. In this article, the commissioning results with 110 mA/100 keV D⁺ beam and 55 mA/50 keV H⁺ beam are first reported.

DOI •

reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-WEPMY033

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)