Author: Padmore, H.A.
Paper Title Page
TUOCA02 APEX Phase-II Commissioning Results at the Lawrence Berkeley National Laboratory 1041
  • F. Sannibale, J.A. Doyle, J. Feng, D. Filippetto, G.L. Harris, M.J. Johnson, T.D. Kramasz, D. Leitner, C.E. Mitchell, J.R. Nasiatka, H.A. Padmore, H.J. Qian, H. Rasool, J.W. Staples, S.P. Virostek, R.P. Wells, M.S. Zolotorev
    LBNL, Berkeley, California, USA
  • S.M. Gierman, R.K. Li, J.F. Schmerge, T. Vecchione, F. Zhou
    SLAC, Menlo Park, California, USA
  • C. Pagani, D. Sertore
    INFN/LASA, Segrate (MI), Italy
  Funding: Work supported by the Director of the Office of Science of the US Department of Energy under Contract no. DEAC02-05CH11231
Science needs in the last decade have been pushing the accelerator community to the development of high repetition rates (MHz/GHz-class) linac-based schemes capable of generating high brightness electron beams. Examples include X-ray FELs; ERLs for light source, electron cooling and IR to EUV FEL applications; inverse Compton scattering X-ray or gamma sources; and ultrafast electron diffraction and microscopy. The high repetition rate requirement has profound implications on the technology choice for most of the accelerator parts, and in particular for the electron gun. The successful performance of the GHz room-temperature RF photo-injectors running at rates <~ 100 Hz, cannot be scaled up to higher rates because of the excessive heat load that those regimes would impose on the gun cavity. In response to this gun need, we have developed at Berkeley the VHF-Gun, a lower-frequency room-temperature RF photo-gun capable of CW operation and optimized for the performance required by MHz-class X-ray FELs. The Advanced Photo-injector EXperiment (APEX) was funded and built for demonstrating the VHF gun performance, and the results of its last phase of commissioning are presented.
slides icon Slides TUOCA02 [12.015 MB]  
DOI • reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-TUOCA02  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
WEPOW051 R+D Progress Towards a Diffraction Limited Upgrade of the ALS 2962
  • C. Steier, A. Anders, J.M. Byrd, K. Chow, S. De Santis, R.M. Duarte, J.-Y. Jung, T.H. Luo, H. Nishimura, T. Oliver, J.R. Osborn, H.A. Padmore, G.C. Pappas, D. Robin, F. Sannibale, D. Schlueter, C. Sun, C.A. Swenson, M. Venturini, W.L. Waldron, E.J. Wallén, W. Wan, Y. Yang
    LBNL, Berkeley, California, USA
  Funding: This work was supported by the Laboratory Directed Research and Development Program of Lawrence Berkeley National Laboratory under U.S. Department of Energy Contract No. DE-AC02-05CH11231.
Improvements in brightness and coherent flux of about two orders of magnitude over operational storage ring based light sources are possible using multi bend achromat lattice designs. These improvements can be implemented as upgrades of existing facilities, like the proposed upgrade of the Advanced Light Source, making use of the existing infrastructure, thereby reducing cost and time needed to reach full scientific productivity on a large number of beamlines. An R&D program was started at LBNL to further develop the technologies necessary for diffraction-limited storage rings. It involves many areas, and focuses on the specific needs of soft x-ray facilities: NEG coating of small chambers, swap-out injection, bunch lengthening, magnets/radiation production, x-ray optics, and beam physics design optimization. Hardware prototypes have been built and concepts and equipment was tested in beam tests on the existing ALS.
DOI • reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-WEPOW051  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)