IPAC2016 - List of Authors (Okugi, T.)

Paper	Title	Page
WEPOR005	Ground Motion Compensation using Feed-forward Control at ATF2	2670
	D.R. Bett, C. Charrondière, M. Patecki, J. Pfingstner, D. Schulte, R. Tomás CERN, Geneva, Switzerland A. Jeremie IN2P3-LAPP, Annecy-le-Vieux, France K. Kubo, S. Kuroda, T. Naito, T. Okugi, T. Tauchi, N. Terunuma KEK, Ibaraki, Japan
	Ground motion compensation using feed-forward control is a novel technique being developed to combat beam imperfections resulting from the vibration-induced misalignment of beamline components. The method is being evaluated experimentally at the KEK Accelerator Test Facility 2 (ATF2). It has already been demonstrated that the beam position correlates with the readings from a set of seismometers located along the beamline. To compensate for this contribution to the beam jitter, the fully operational system will use realtime measurement and processing in order to calculate and apply the feed-forward correction on a useful time scale. The progress towards a working system is presented in this paper.
DOI •	reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-WEPOR005
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPMB043	Progress in Ultra-Low β* Study at ATF2	3335
	M. Patecki, D.R. Bett, F. Plassard, R. Tomás CERN, Geneva, Switzerland K. Kubo, S. Kuroda, T. Naito, T. Okugi, T. Tauchi, N. Terunuma KEK, Ibaraki, Japan M. Patecki Warsaw University of Technology, Warsaw, Poland T. Tauchi, N. Terunuma Sokendai, Ibaraki, Japan
	A nanometer beam size in the interaction point (IP) is required in case of future linear colliders for achieving the desired rate of particle collisions. KEK Accelerator Test Facility (ATF2), a scaled down implementation of the beam delivery system (BDS), serves for investigating the limits of electron beam focusing at the interaction point. The goal of the ultra-low beta∗ study is to lower the IP vertical beam size by lowering the beta_y∗ value while keeping the beta_x∗ value unchanged. Good control over the beam optics is therefore required. The first experience with low beta∗ optics revealed a mismatch between the optics designed in the model with respect to the beam parameters observed in the experiment. Additionally, existing methods of beam parameters characterization at the IP were biased with high uncertainties making it difficult to set the desired optics. In this paper we report on the new method introduced in ATF2 for IP beam parameters characterization which gives a good control over the applied optics and makes the ultra-low beta∗ study possible to conduct. It can be also used for verifying the performance of some of the existing beam instrumentation devices.
DOI •	reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-THPMB043
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPOR030	Commissioning and First Performance Studies of a Single Vertical Beam Halo Collimation System at ATF2	3844
	N. Fuster-Martínez, A. Faus-Golfe IFIC, Valencia, Spain P. Bambade, A. Faus-Golfe, S. Wallon, R.J. Yang LAL, Orsay, France K. Kubo, T. Okugi, T. Tauchi, N. Terunuma KEK, Ibaraki, Japan I. Podadera, F. Toral CIEMAT, Madrid, Spain T. Tauchi, N. Terunuma Sokendai, Ibaraki, Japan
	A single vertical beam halo collimation system has been installed in the ATF2 beamline to reduce the background that could limit the precision of the diagnostics located in the post-IP beamline. On this paper the commissioning and first performance studies of a single vertical beam halo collimation system are reported. Furthermore realistic efficiency studies have been done using the simulation code BDSIM and compared with the first experimental tests.
DOI •	reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-THPOR030
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Ground Motion Compensation using Feed-forward Control at ATF2

2670

D.R. Bett, C. Charrondière, M. Patecki, J. Pfingstner, D. Schulte, R. Tomás
CERN, Geneva, Switzerland
A. Jeremie
IN2P3-LAPP, Annecy-le-Vieux, France
K. Kubo, S. Kuroda, T. Naito, T. Okugi, T. Tauchi, N. Terunuma
KEK, Ibaraki, Japan

Ground motion compensation using feed-forward control is a novel technique being developed to combat beam imperfections resulting from the vibration-induced misalignment of beamline components. The method is being evaluated experimentally at the KEK Accelerator Test Facility 2 (ATF2). It has already been demonstrated that the beam position correlates with the readings from a set of seismometers located along the beamline. To compensate for this contribution to the beam jitter, the fully operational system will use realtime measurement and processing in order to calculate and apply the feed-forward correction on a useful time scale. The progress towards a working system is presented in this paper.

DOI •

reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-WEPOR005

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPMB043

Progress in Ultra-Low β* Study at ATF2

3335

M. Patecki, D.R. Bett, F. Plassard, R. Tomás
CERN, Geneva, Switzerland
K. Kubo, S. Kuroda, T. Naito, T. Okugi, T. Tauchi, N. Terunuma
KEK, Ibaraki, Japan
M. Patecki
Warsaw University of Technology, Warsaw, Poland
T. Tauchi, N. Terunuma
Sokendai, Ibaraki, Japan

A nanometer beam size in the interaction point (IP) is required in case of future linear colliders for achieving the desired rate of particle collisions. KEK Accelerator Test Facility (ATF2), a scaled down implementation of the beam delivery system (BDS), serves for investigating the limits of electron beam focusing at the interaction point. The goal of the ultra-low beta∗ study is to lower the IP vertical beam size by lowering the beta_y∗ value while keeping the beta_x∗ value unchanged. Good control over the beam optics is therefore required. The first experience with low beta∗ optics revealed a mismatch between the optics designed in the model with respect to the beam parameters observed in the experiment. Additionally, existing methods of beam parameters characterization at the IP were biased with high uncertainties making it difficult to set the desired optics. In this paper we report on the new method introduced in ATF2 for IP beam parameters characterization which gives a good control over the applied optics and makes the ultra-low beta∗ study possible to conduct. It can be also used for verifying the performance of some of the existing beam instrumentation devices.

DOI •

reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-THPMB043

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPOR030

Commissioning and First Performance Studies of a Single Vertical Beam Halo Collimation System at ATF2

3844

N. Fuster-Martínez, A. Faus-Golfe
IFIC, Valencia, Spain
P. Bambade, A. Faus-Golfe, S. Wallon, R.J. Yang
LAL, Orsay, France
K. Kubo, T. Okugi, T. Tauchi, N. Terunuma
KEK, Ibaraki, Japan
I. Podadera, F. Toral
CIEMAT, Madrid, Spain
T. Tauchi, N. Terunuma
Sokendai, Ibaraki, Japan

A single vertical beam halo collimation system has been installed in the ATF2 beamline to reduce the background that could limit the precision of the diagnostics located in the post-IP beamline. On this paper the commissioning and first performance studies of a single vertical beam halo collimation system are reported. Furthermore realistic efficiency studies have been done using the simulation code BDSIM and compared with the first experimental tests.

DOI •

reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-THPOR030

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)