IPAC2016 - List of Authors (Kongmon, E.)

Paper	Title	Page
TUPOY039	Studies on Electron Linear Accelerator System for Polymer Research	1985
SUPSS113	use link to see paper's listing under its alternate paper code
	E. Kongmon IST, Chiang Mai, Thailand N. Kangrang Chiang Mai University, PBP Research Facility, Chiang Mai, Thailand S. Rimjaem, J. Saisut, C. Thongbai Chiang Mai University, Chiang Mai, Thailand P. Wichaisirimongkol Chiang Mai University, Science and Technology Research Institute, Chiang Mai, Thailand
	This research focuses on modification of an elec-tron linear accelerator system for irradiation of natural rubber latex and polymeric materials at the Plasma and Beam Physics Research Facility, Chiang Mai Universi-ty, Thailand. This is in order to study the change of material properties due to electron beam irradiation. The main accelerator system consists of a DC thermi-onic electron gun and a short standing-wave linac. This system will be able to produce electron beams with variable energy in the range of 0.5 to 4 MeV. The linac macro pulse frequency is adjustable within the range of 20 to 1000 Hz. The macro pulse duration is 4 μs. The electron pulse current can be varied from 10 to 100 mA. This lead to the electron dose of about 0.44 to 4.4 Gy-m2/min. In this paper, overview of the accelera-tor and the irradiation system is presented. Results of low-level RF measurements of the accelerating struc-ture are also reported and discussed. This work has been supported by the CMU Junior Research Fellowship Program, the Department of Physics and Material Science, Faculty of science, Chiang Mai University.
DOI •	reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-TUPOY039
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

TUPOY039

Studies on Electron Linear Accelerator System for Polymer Research

1985

SUPSS113

use link to see paper's listing under its alternate paper code

E. Kongmon
IST, Chiang Mai, Thailand
N. Kangrang
Chiang Mai University, PBP Research Facility, Chiang Mai, Thailand
S. Rimjaem, J. Saisut, C. Thongbai
Chiang Mai University, Chiang Mai, Thailand
P. Wichaisirimongkol
Chiang Mai University, Science and Technology Research Institute, Chiang Mai, Thailand

This research focuses on modification of an elec-tron linear accelerator system for irradiation of natural rubber latex and polymeric materials at the Plasma and Beam Physics Research Facility, Chiang Mai Universi-ty, Thailand. This is in order to study the change of material properties due to electron beam irradiation. The main accelerator system consists of a DC thermi-onic electron gun and a short standing-wave linac. This system will be able to produce electron beams with variable energy in the range of 0.5 to 4 MeV. The linac macro pulse frequency is adjustable within the range of 20 to 1000 Hz. The macro pulse duration is 4 μs. The electron pulse current can be varied from 10 to 100 mA. This lead to the electron dose of about 0.44 to 4.4 Gy-m2/min. In this paper, overview of the accelera-tor and the irradiation system is presented. Results of low-level RF measurements of the accelerating struc-ture are also reported and discussed.
This work has been supported by the CMU Junior Research Fellowship Program, the Department of Physics and Material Science, Faculty of science, Chiang Mai University.

DOI •

reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-TUPOY039

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)