Author: Kondo, Y.
Paper Title Page
TUPMB033 Design and Construction of the QC2 Superconducting Magnets in the SuperKEKB IR 1174
  • N. Ohuchi, Y. Arimoto, N. Higashi, M. Iwasaki, M.K. Kawai, Y. Kondo, K. Tsuchiya, X. Wang, H. Yamaoka, Z.G. Zong
    KEK, Ibaraki, Japan
  • H.K. Kono, T. Murai, S. Takagi
    Mitsubishi Electric Corp., Energy Systems Centre, Kobe, Japan
  SuperKEKB is now being constructed with a target luminosity of 8×1035 which is 40 times higher than the KEKB luminosity. The luminosity can be achieved by the "Nano-Beam" accelerator scheme, in which both beams should be squeezed to about 50 nm at the beam interaction point, IP. The beam final focusing system consists of 8 superconducting quadrupole magnets, 4 superconducting solenoids and 43 superconducting corrector coils. The QC2 magnets are designed to be located in the second closest position from IP as the final beam focusing system of SuperKEKB. The two types of quadrupole magnets have been designed for the electron and positron beam lines. The QC2P for the positron beam is designed to generate the field gradient, G, of 28.1 T/m and the effective magnetic length, L, of 0.4099 m at the current, I, of 877.4 A. The QC2E for the electron beam line is designed to generate G=28.44 T/m and L=0.537 mm, 0.419 mm (for QC2LE, QC2RE) at I=977 A. In the paper, we will present the designs and the constructions of the two types of the quadrupole magnets.  
DOI • reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-TUPMB033  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
TUPOW036 Recent Developments and Operational Status of the Compact ERL at KEK 1835
  • T. Obina, M. Adachi, S. Adachi, T. Akagi, M. Akemoto, D.A. Arakawa, S. Araki, S. Asaoka, M. Egi, K. Enami, K. Endo, S. Fukuda, T. Furuya, K. Haga, K. Hara, K. Harada, T. Honda, Y. Honda, H. Honma, T. Honma, K. Hosoyama, K. Hozumi, A. Ishii, X.J. Jin, E. Kako, Y. Kamiya, H. Katagiri, R. Kato, H. Kawata, Y. Kobayashi, Y. Kojima, Y. Kondo, T. Konomi, A. Kosuge, T. Kume, T. Matsumoto, H. Matsumura, H. Matsushita, S. Michizono, T. Miura, T. Miyajima, H. Miyauchi, S. Nagahashi, H. Nakai, H. Nakajima, N. Nakamura, K. Nakanishi, K. Nakao, K.N. Nigorikawa, T. Nogami, S. Noguchi, S. Nozawa, T. Ozaki, F. Qiu, H. Sagehashi, H. Sakai, S. Sakanaka, S. Sasaki, K. Satoh, Y. Seimiya, T. Shidara, M. Shimada, K. Shinoe, T. Shioya, T. Shishido, M. Tadano, T. Tahara, T. Takahashi, R. Takai, H. Takaki, T. Takenaka, O. Tanaka, Y. Tanimoto, N. Terunuma, M. Tobiyama, K. Tsuchiya, T. Uchiyama, A. Ueda, K. Umemori, J. Urakawa, K. Watanabe, M. Yamamoto, N. Yamamoto, Y. Yamamoto, Y. Yano, M. Yoshida
    KEK, Ibaraki, Japan
  • R. Hajima, M. Mori, R. Nagai, N. Nishimori, M. Sawamura, T. Shizuma
    QST, Tokai, Japan
  • M. Kuriki
    Hiroshima University, Graduate School of Science, Higashi-Hiroshima, Japan
  The Compact Energy Recovery Linac (cERL) at KEK is a test accelerator in order to develop key components to realize remarkable ERL performance as a future light source. After the beam commissioning in December 2013, the legal current limit has been increased step-by-step like 1 uA, 10 uA, and 100 uA. Survey for the source of beam losses has been conducted in each step, and the study on beam dynamics and tuning has also been carried out. As a next step, 1 mA operation is scheduled in February 2016. In parallel to the increase in beam current, a laser Compton scattering (LCS) system which can provide high-flux X-ray to a beamline has been successfully commissioned. We report recent progress in various kinds of beam tuning: improvement of electron gun performance, high bunch charge operation, mitigation of beam losses, LCS optics tuning and bunch compression for THz radiation.  
DOI • reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-TUPOW036  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
WEPMB015 Construction and 2K Cooling Test of Horizontal Test Cryostat at KEK 2151
  • K. Umemori, K. Hara, E. Kako, Y. Kobayashi, Y. Kondo, H. Nakai, H. Sakai, S. Yamaguchi
    KEK, Ibaraki, Japan
  A horizontal test cryostat was designed and constructed at AR East building on KEK. Main purposes of test stand are improvement of module assembly technique and effective development of module components. Diameter of vacuum chamber is 1 m and its length is 3 m, which is enough to realize performance test of L-band 9-cell cavity with full assembly, including input couplers, HOM dampers/couplers and frequency tuners. On the sides, several ports are prepared to access to components, such as coupler and tuners. A cold box is placed on the top of the chamber. Liquid He is filled in a 4K-pod and 2K He is supplied through a J-T valve. A He pumping system is prepared. Inside of the chamber was covered with 80K shield, which is cooled by Liquid nitrogen. A cavity is supported on 5K table, which is also used as 5K thermal anchors. After cooling down to 80K using liquid Nitrogen, 4K He was stored and pumped down to 2K. The cooling test was successful. In this presentation, details of design and construction of the horizontal test cryostat is described and results of the cooling tests are shown. High power tests will be realized in near future.  
DOI • reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-WEPMB015  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)