Author: Kitano, T.
Paper Title Page
WEPMY033 Intermediate Commissioning Results of the 70 mA/50 keV H+ and 140 mA/100 keV D+ ECR Injector of IFMIF/LIPAC 2625
 
  • B. Bolzon, N. Chauvin, S. Chel, R. Gobin, F. Harrault, F. Senée, M. Valette
    CEA/DSM/IRFU, France
  • J.M. Ayala, J. Knaster, A. Marqueta, K. Nishiyama, Y. Okumura, M. Perez, G. Pruneri, F. Scantamburlo
    IFMIF/EVEDA, Rokkasho, Japan
  • P.-Y. Beauvais, H. Dzitko, D. Gex, G. Phillips
    F4E, Germany
  • L. Bellan
    Univ. degli Studi di Padova, Padova, Italy
  • L. Bellan, M. Comunian, E. Fagotti, F. Grespan, A. Pisent
    INFN/LNL, Legnaro (PD), Italy
  • P. Cara, R. Heidinger
    Fusion for Energy, Garching, Germany
  • R. Ichimiya, A. Ihara, Y. Ikeda, A. Kasugai, T. Kikuchi, T. Kitano, M. Komata, K. Kondo, S. Maebara, S. O'hira, M. Sugimoto, H. Takahashi, H. Usami
    JAEA, Aomori, Japan
  • K. Sakamoto
    QST, Aomori, Japan
  • K. Shinto
    Japan Atomic Energy Agency (JAEA), International Fusion Energy Research Center (IFERC), Rokkasho, Kamikita, Aomori, Japan
 
  The LIPAc accelerator aims to operate 125 mA/CW deuteron beam at 9 MeV to validate IFMIF's accelerators that will operate in CW 125 mA at 40 MeV. The different subsystems of LIPAc have been designed and constructed mainly by European labs and are being installed and commissioned in Rokkasho Fusion Center. The 2.45 GHz ECR injector developed by CEA-Saclay is designed to deliver 140 mA/100 keV CW D+ beam with 99% gas fraction ratio. Its LEBT presents a dual solenoid focusing system to transport and match the beam into the RFQ. Its commissioning continues in 2016 in parallel with the RFQ installation. The normalized RMS emittance at the RFQ injection cone is to be within 0.25π mm·mrad to allow 96% transmission through the 9.81 m long RFQ. In order to avoid activation during commissioning, an equal perveance H+ beam of half current and half energy as nominal with deuterons is used. In this article, the commissioning results with 110 mA/100 keV D+ beam and 55 mA/50 keV H+ beam are first reported.  
DOI • reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-WEPMY033  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)