Author: Kimura, A.
Paper Title Page
THPMY002 Fabrication of Ferrite-Copper Block by Spark Plasma Sintering (SPS) 3654
  • Y. Suetsugu, T. Ishibashi, S. Terui
    KEK, Ibaraki, Japan
  • H. Ishizaki, A. Kimura, T. Sawhata
    Metal Technology Co. Ltd., Ibaraki, Japan
  A ferrite has been well known as an effective material for absorbing electromagnetic waves. Various types of the ferrite blocks have been actually used in accelerator fields as the higher-order modes (HOMs) absorbers in the vacuum beam pipes. However, one of difficulties in using the ferrite is to bond it to the beam pipes with a sufficient adhesive force, and to assure the contact with a high thermal conductivity in vacuum. The brazing or Hot Isostatic Pressing (HIP) is not so easy owing to a low thermal expansion rate and a relatively low tensile strength of the ferrite. We established a method of fabricating a ferrite block bonded to copper by spark plasma sintering (SPS). The ferrite powders are directly sintered on a copper block in the SPS process together with some metals to relax the thermal stress between them. The sintered ferrite-copper block can be brazed or welded to other metal blocks, or directly on the beam pipes. Here reported are R&D results of the fabrication method, and some experimental results on the properties of the ferrite-copper block.  
DOI • reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-THPMY002  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)