IPAC2016 - List of Authors (Kim, D.I.)

Paper	Title	Page
TUPMR001	Preliminary Test of 1 Mv Electrostatic Accelerator at Komac	1222
	D.I. Kim KAERI, Daejon, Republic of Korea Y.-S. Cho, H.-J. Kwon, S.H. Park Korea Atomic Energy Research Institute (KAERI), Gyeongbuk, Republic of Korea
	Funding: This work was supported by the Ministry of Education, Science and Technology of the Korean Government. 1 MV electrostatic accelerator is being developed to satisfy the needs from the users, especially for the applications with a MeV range ion beam implantation at KOrea Multi-purpose Accelerator Complex (KOMAC). Typically, the accelerator consists of ion source, beam transport system and target chamber. For the accelerating voltage of a MeV range, ELV type high voltage power supply has been selected. And then, ion source has been selected as the newly developed RF ion source which can be installed inside the pressure vessel of high voltage power supply due to its limited space and electrical power. In this paper, preliminary test of 1 MV electrostatic accelerator including test results in test stand is presented.
DOI •	reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-TUPMR001
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPMR055	Solid Targetry for the Isotope Production Facility at the KOMAC 100 MeV Linac	1384
	S.P. Yun, Y.-S. Cho, H.S. Kim, H.-J. Kwon, K.T. Seol, Y.G. Song Korea Atomic Energy Research Institute (KAERI), Gyeongbuk, Republic of Korea D.I. Kim KAERI, Daejon, Republic of Korea
	Funding: *This work was supported by the Ministry of Science, ICT and Future Planning of the Korean Government. The construction of the isotope production facility was recently completed on the 100 MeV proton linac at the KOMAC (Korea multi-purpose accelerator complex). To produce the Sr-82 and Cu-67, we have prepared the solid targetry which consist of target transportation system , target cooling system and a hot-cell for remote handling. The Isotope production targets are made of RbCl pellet and stainless steel cladding. For the proton beam irradiation, the targets are transported by target drive system which consist of drive chain and guide rail by remotely. In this paper, we will report the detailed design, fabrication and operation status of the solid targetry at the KOMAC isotope production facility.
DOI •	reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-TUPMR055
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Preliminary Test of 1 Mv Electrostatic Accelerator at Komac

1222

D.I. Kim
KAERI, Daejon, Republic of Korea
Y.-S. Cho, H.-J. Kwon, S.H. Park
Korea Atomic Energy Research Institute (KAERI), Gyeongbuk, Republic of Korea

Funding: This work was supported by the Ministry of Education, Science and Technology of the Korean Government.
1 MV electrostatic accelerator is being developed to satisfy the needs from the users, especially for the applications with a MeV range ion beam implantation at KOrea Multi-purpose Accelerator Complex (KOMAC). Typically, the accelerator consists of ion source, beam transport system and target chamber. For the accelerating voltage of a MeV range, ELV type high voltage power supply has been selected. And then, ion source has been selected as the newly developed RF ion source which can be installed inside the pressure vessel of high voltage power supply due to its limited space and electrical power. In this paper, preliminary test of 1 MV electrostatic accelerator including test results in test stand is presented.

DOI •

reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-TUPMR001

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPMR055

Solid Targetry for the Isotope Production Facility at the KOMAC 100 MeV Linac

1384

S.P. Yun, Y.-S. Cho, H.S. Kim, H.-J. Kwon, K.T. Seol, Y.G. Song
Korea Atomic Energy Research Institute (KAERI), Gyeongbuk, Republic of Korea
D.I. Kim
KAERI, Daejon, Republic of Korea

Funding: *This work was supported by the Ministry of Science, ICT and Future Planning of the Korean Government.
The construction of the isotope production facility was recently completed on the 100 MeV proton linac at the KOMAC (Korea multi-purpose accelerator complex). To produce the Sr-82 and Cu-67, we have prepared the solid targetry which consist of target transportation system , target cooling system and a hot-cell for remote handling. The Isotope production targets are made of RbCl pellet and stainless steel cladding. For the proton beam irradiation, the targets are transported by target drive system which consist of drive chain and guide rail by remotely. In this paper, we will report the detailed design, fabrication and operation status of the solid targetry at the KOMAC isotope production facility.

DOI •

reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-TUPMR055

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)