IPAC2016 - List of Authors (Kikunaga, H.)

Paper	Title	Page
TUPOW011	Profile Measurements of Bremsstrahlung Gamma-Rays from Tungsten Plates for Radioactive Isotope Production via Photonuclear Reaction using a 60 MeV Electron Linac	1766
	K. Takahashi, H. Hama, F. Hinode, S. Kashiwagi, H. Kikunaga, T. Muto, I. Nagasawa, K. Nanbu, Y. Shibasaki, T. Suda, C. Tokoku, K. Tsukada Tohoku University, Research Center for Electron Photon Science, Sendai, Japan
	Radioactive isotopes have been produced via photo-nuclear reaction using a 60 MeV high-power electron linac for research fields of nuclear chemistry and radioac-tive analysis at Research Center for Electron Photon Science (ELPH), Tohoku University. The electron beam with an average current more than 100 μA is transported to an electron-bremsstrahlung gamma-ray converter of 2 mm thickness platinum or tungsten plate at the irradiation station. A target of 10 mm diameter is placed 3 cm behind a converter. It is enclosed with a quartz glass in the water cooling system and is irradiated for photonuclear reaction. Since the correlation between the spatial profile of bremsstrahlung gamma-rays at the target position and accelerator parameters is of our primary interest, nickel thin films are irradiated and the profiles of bremsstrahlung gamma-rays are measured by intensity distribution measurements of 57Ni radioactivity using the phosphorus imaging plate. In the meantime, the beam emittance and Twiss parameters are measured.
DOI •	reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-TUPOW011
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Profile Measurements of Bremsstrahlung Gamma-Rays from Tungsten Plates for Radioactive Isotope Production via Photonuclear Reaction using a 60 MeV Electron Linac

1766

K. Takahashi, H. Hama, F. Hinode, S. Kashiwagi, H. Kikunaga, T. Muto, I. Nagasawa, K. Nanbu, Y. Shibasaki, T. Suda, C. Tokoku, K. Tsukada
Tohoku University, Research Center for Electron Photon Science, Sendai, Japan

Radioactive isotopes have been produced via photo-nuclear reaction using a 60 MeV high-power electron linac for research fields of nuclear chemistry and radioac-tive analysis at Research Center for Electron Photon Science (ELPH), Tohoku University. The electron beam with an average current more than 100 μA is transported to an electron-bremsstrahlung gamma-ray converter of 2 mm thickness platinum or tungsten plate at the irradiation station. A target of 10 mm diameter is placed 3 cm behind a converter. It is enclosed with a quartz glass in the water cooling system and is irradiated for photonuclear reaction. Since the correlation between the spatial profile of bremsstrahlung gamma-rays at the target position and accelerator parameters is of our primary interest, nickel thin films are irradiated and the profiles of bremsstrahlung gamma-rays are measured by intensity distribution measurements of 57Ni radioactivity using the phosphorus imaging plate. In the meantime, the beam emittance and Twiss parameters are measured.

DOI •

reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-TUPOW011

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)