Paper | Title | Page |
---|---|---|
TUPOW006 | Six-dimensional Phase-space Rotation and its Applications | 1754 |
|
||
Funding: This work is partly supported by Grant-in-Aid for Scientific Research by MEXT, Japan (KAKENHI) 25390126. Recent progress on the accelerator science requires optimized phase space distributions of the beam for each applications. A classical approach to satisfy the requirements is minimizing the beam emittance with a bunch charge as much as possible. This classical approach is not efficient and not compatible to the beam dynamics nature. 6D phase-space rotation, e.g. z-x and x-y, gives a way to optimize the phase space distribution for various applications. In this article, we discus possible applications of the 6D phase space rotation. The x-y rotation generates the high aspect ratio beam for linear colliders directly without DR (Damping Ring). Combination of bunch clipping with a mechanical slit and x-z rotation can generate micro-bunch structure which is applicable for FEL enhancement and drive beam for dielectric acceleration. We present our theoretical and simulation study on these applications. |
||
DOI • | reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-TUPOW006 | |
Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
TUPOW036 | Recent Developments and Operational Status of the Compact ERL at KEK | 1835 |
|
||
The Compact Energy Recovery Linac (cERL) at KEK is a test accelerator in order to develop key components to realize remarkable ERL performance as a future light source. After the beam commissioning in December 2013, the legal current limit has been increased step-by-step like 1 uA, 10 uA, and 100 uA. Survey for the source of beam losses has been conducted in each step, and the study on beam dynamics and tuning has also been carried out. As a next step, 1 mA operation is scheduled in February 2016. In parallel to the increase in beam current, a laser Compton scattering (LCS) system which can provide high-flux X-ray to a beamline has been successfully commissioned. We report recent progress in various kinds of beam tuning: improvement of electron gun performance, high bunch charge operation, mitigation of beam losses, LCS optics tuning and bunch compression for THz radiation. | ||
DOI • | reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-TUPOW036 | |
Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
WEPOW020 | Present Status of KEK Photon Factory and Future Project | 2871 |
|
||
Two synchrotron radiation sources of KEK, the PF-ring and the PF-AR, continue their user operation with various improvements. Scrap and build of the first generation undulators of 1980s at the PF-ring is pushed forward year by year. Five new elliptically polarized undulators have been installed in these five years, and we have also installed four very narrow-gap short-period undulators generating high brilliant X-ray. The new beam transport line that enables the 6.5-GeV full energy injection for PF-AR will be completed by the end of 2016 in order to make the top-up operation of the two SR sources compatible with the continuous injection for two main rings of the Super-KEKB. We have proposed a project of further upgrade of the 2.5-GeV PF-ring to improve its horizontal emittance as 8 nm rad using combined bending magnets at the arc sections. And we are also moving ahead on proposal of constructing a new KEK light source of an extremely low emittance as 0.3 nm rad. The progress and detail of our future project will be described in this paper. | ||
DOI • | reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-WEPOW020 | |
Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |