IPAC2016 - List of Authors (Kang, W.)

Paper	Title	Page
TUPMB007	Research and Development of the Pulse Bump Magnet for the Injection System in CSNS/RCS	1118
	L. Huo, M.Y. Huang, W. Kang, Y.Q. Liu, J. Qiu, L. Wang, S. Wang IHEP, Beijing, People's Republic of China
	The H⁻ stripping painting injection is adopted in the Rapid Cycling Synchrotron (RCS) of China Spallation Neutron Source (CSNS). Painting injection is realized by eight pulse bump magnets. The pulse bump magnet is the key of the performance of painting, as well as the beam loss control. The manufacture and the field measurement of the eight pulse bump magnets have been completed. In the development of the magnets, some key technical problems on fabrication of coil were solved, and the field measurement results show that the magnets fulfil the design specification.
DOI •	reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-TUPMB007
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMR048	Hall Element Relative Position and Angle Calibrations for the Cryogenic Permanent Magnet Undulator	2386
SUPSS108	use link to see paper's listing under its alternate paper code
	L. Gong, W. Chen, W. Kang, L.Z. Li, H.H. Lu, Y.F. Yang IHEP, Beijing, People's Republic of China
	A three dimensions Hall probe will be manufactured for characterizing the magnetic performance of Cryogenic Permanent Magnet Undulator (CPMU) of Chinese High Energy Photon Source and the test facility (HEPS-TF) at Institute of High Energy Physics (IHEP). The positional and angular misalignment errors of the Hall sensors play an important role in the measurement accuracy of CPMU. In order to minimize the misalignment errors, a method of calibrating relative displacements and assembly angles of a 3-D Hall probe is carried out. In this paper, details of the calibration procedures and the data processing are presented.
DOI •	reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-WEPMR048
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Research and Development of the Pulse Bump Magnet for the Injection System in CSNS/RCS

1118

L. Huo, M.Y. Huang, W. Kang, Y.Q. Liu, J. Qiu, L. Wang, S. Wang
IHEP, Beijing, People's Republic of China

The H⁻ stripping painting injection is adopted in the Rapid Cycling Synchrotron (RCS) of China Spallation Neutron Source (CSNS). Painting injection is realized by eight pulse bump magnets. The pulse bump magnet is the key of the performance of painting, as well as the beam loss control. The manufacture and the field measurement of the eight pulse bump magnets have been completed. In the development of the magnets, some key technical problems on fabrication of coil were solved, and the field measurement results show that the magnets fulfil the design specification.

DOI •

reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-TUPMB007

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMR048

Hall Element Relative Position and Angle Calibrations for the Cryogenic Permanent Magnet Undulator

2386

SUPSS108

use link to see paper's listing under its alternate paper code

L. Gong, W. Chen, W. Kang, L.Z. Li, H.H. Lu, Y.F. Yang
IHEP, Beijing, People's Republic of China

A three dimensions Hall probe will be manufactured for characterizing the magnetic performance of Cryogenic Permanent Magnet Undulator (CPMU) of Chinese High Energy Photon Source and the test facility (HEPS-TF) at Institute of High Energy Physics (IHEP). The positional and angular misalignment errors of the Hall sensors play an important role in the measurement accuracy of CPMU. In order to minimize the misalignment errors, a method of calibrating relative displacements and assembly angles of a 3-D Hall probe is carried out. In this paper, details of the calibration procedures and the data processing are presented.

DOI •

reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-WEPMR048

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)