Author: Bogomyagkov, A.V.
Paper Title Page
THPOR019 Momentum Acceptance Optimization in FCC-ee Lattice (CERN) 3814
 
  • A.V. Bogomyagkov, E.B. Levichev
    BINP SB RAS, Novosibirsk, Russia
 
  Funding: Work is supported by the Ministry of Education and Science of the Russian Federation.
The part of the ongoing study of the future circular collider (FCC) is an electron positron machine with center of mass energy from 90 to 350 GeV. Crab waist collision scheme and small (1 mm) vertical beta function at the interaction point (IP) provide superior luminosity. At the top energy, radiation in the field of the opposite bunch (beamstrahlung) limits the beam lifetime and therefore achievable luminosity. Beamstrahlung influence depends on momentum acceptance of the lattice, the value of 2% provides acceptable lifetime. The small value of vertical beta function enhances effects of nonlinear chromaticity. The present work describes principles used in design and optimization of FCC-ee momentum acceptance optimization and are based on chromatic variations of beta function.
 
DOI • reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-THPOR019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPOR022 Design of Beam Optics for the FCC-ee Collider Ring 3821
 
  • K. Oide, K. Ohmi, D. Zhou
    KEK, Ibaraki, Japan
  • M. Aiba
    PSI, Villigen PSI, Switzerland
  • S. Aumon, M. Benedikt, H. Burkhardt, A. Doblhammer, B. Härer, B.J. Holzer, J.M. Jowett, M. Koratzinos, L.E. Medina Medrano, Y. Papaphilippou, J. Wenninger, F. Zimmermann
    CERN, Geneva, Switzerland
  • A.P. Blondel
    DPNC, Genève, Switzerland
  • A.V. Bogomyagkov, I. Koop, E.B. Levichev, P.A. Piminov, D.N. Shatilov, D.B. Shwartz, S.V. Sinyatkin
    BINP SB RAS, Novosibirsk, Russia
  • M. Boscolo
    INFN/LNF, Frascati (Roma), Italy
  • Y. Cai, M.K. Sullivan, U. Wienands
    SLAC, Menlo Park, California, USA
 
  A design of beam optics will be presented for the FCC-ee double-ring collider. The main characteristics are 45 to 175 GeV beam energy, 100 km circumference with two IPs/ring, 30 mrad crossing angle at the IP, crab-waist scheme with local chromaticity correction system, and "tapering" of the magnets along with the local beam energy. An asymmetric layout near the interaction region suppresses the critical energy of synchrotron radiation toward the detector at the IP less than 100 keV, while keeping the geometry as close as to the FCC-hh beam line. A sufficient transverse/longitudinal dynamic aperture is obtained to assure the lifetime with beamstrahlung and top-up injection. The synchrotron radiation in all magnets, the IP solenoid and its compensation, nonlinearity of the final quadrupoles are taken into account.  
DOI • reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-THPOR022  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPOR023 The FCC-ee Interaction Region Magnet Design 3824
 
  • M. Koratzinos, A.P. Blondel
    DPNC, Genève, Switzerland
  • M. Benedikt, B.J. Holzer, F. Zimmermann, J. van Nugteren
    CERN, Geneva, Switzerland
  • A.V. Bogomyagkov, S.V. Sinyatkin
    BINP SB RAS, Novosibirsk, Russia
  • K. Oide
    KEK, Ibaraki, Japan
 
  The design of the region close to the interaction point of the FCC-ee experiments is especially challenging. The beams collide at an angle (±15 mrad) in the high-field region of the detector solenoid. Moreover, the very low vertical β* of the machine necessitates that the final focusing quadrupoles have a distance from the IP (L*) of around 2 m and therefore are inside the main detector solenoid. The beams should be screened from the effect of the detector magnetic field, and the emittance blow-up due to vertical dispersion in the interaction region should be minimized, while leaving enough space for detector components. Crosstalk between the two final focus quadrupoles, only about 6 cm apart at the tip, should also be minimized.  
DOI • reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-THPOR023  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)