IPAC2016 - List of Authors (Benedikt, M.)

Paper	Title	Page
TUPMW037	Luminosity Targets for FCC-hh	1523
	F. Zimmermann, M. Benedikt, X. Buffat, D. Schulte CERN, Geneva, Switzerland
	Funding: Supported by the European Commission under the Capacities 7th Framework Programme project EuCARD-2, grant agreement 312453, and under the HORIZON 2020 project EuroCirCol, grant agreement 654305. We discuss the choice of target values for the peak and integrated luminosity of a future high-energy frontier circular hadron collider (FCC-hh). We review the arguments on the physics reach of a hadron collider. Next we show that accelerator constraints will limit the beam current and the turnaround time. Taking these limits into account, we derive an expression for the ultimate integrated luminosity per year, depending on a possible pile-up limit imposed by the physics experiments. We finally benchmark our result against the planned two phases of FCC-hh.
DOI •	reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-TUPMW037
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPOR022	Design of Beam Optics for the FCC-ee Collider Ring	3821
	K. Oide, K. Ohmi, D. Zhou KEK, Ibaraki, Japan M. Aiba PSI, Villigen PSI, Switzerland S. Aumon, M. Benedikt, H. Burkhardt, A. Doblhammer, B. Härer, B.J. Holzer, J.M. Jowett, M. Koratzinos, L.E. Medina Medrano, Y. Papaphilippou, J. Wenninger, F. Zimmermann CERN, Geneva, Switzerland A.P. Blondel DPNC, Genève, Switzerland A.V. Bogomyagkov, I. Koop, E.B. Levichev, P.A. Piminov, D.N. Shatilov, D.B. Shwartz, S.V. Sinyatkin BINP SB RAS, Novosibirsk, Russia M. Boscolo INFN/LNF, Frascati (Roma), Italy Y. Cai, M.K. Sullivan, U. Wienands SLAC, Menlo Park, California, USA
	A design of beam optics will be presented for the FCC-ee double-ring collider. The main characteristics are 45 to 175 GeV beam energy, 100 km circumference with two IPs/ring, 30 mrad crossing angle at the IP, crab-waist scheme with local chromaticity correction system, and "tapering" of the magnets along with the local beam energy. An asymmetric layout near the interaction region suppresses the critical energy of synchrotron radiation toward the detector at the IP less than 100 keV, while keeping the geometry as close as to the FCC-hh beam line. A sufficient transverse/longitudinal dynamic aperture is obtained to assure the lifetime with beamstrahlung and top-up injection. The synchrotron radiation in all magnets, the IP solenoid and its compensation, nonlinearity of the final quadrupoles are taken into account.
DOI •	reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-THPOR022
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPOR023	The FCC-ee Interaction Region Magnet Design	3824
	M. Koratzinos, A.P. Blondel DPNC, Genève, Switzerland M. Benedikt, B.J. Holzer, F. Zimmermann, J. van Nugteren CERN, Geneva, Switzerland A.V. Bogomyagkov, S.V. Sinyatkin BINP SB RAS, Novosibirsk, Russia K. Oide KEK, Ibaraki, Japan
	The design of the region close to the interaction point of the FCC-ee experiments is especially challenging. The beams collide at an angle (±15 mrad) in the high-field region of the detector solenoid. Moreover, the very low vertical β* of the machine necessitates that the final focusing quadrupoles have a distance from the IP (L*) of around 2 m and therefore are inside the main detector solenoid. The beams should be screened from the effect of the detector magnetic field, and the emittance blow-up due to vertical dispersion in the interaction region should be minimized, while leaving enough space for detector components. Crosstalk between the two final focus quadrupoles, only about 6 cm apart at the tip, should also be minimized.
DOI •	reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-THPOR023
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPOR024	Electrical Power Budget for FCC-ee	3828
	F. Zimmermann, S. Aull, M. Benedikt, D. Bozzini, O. Brunner, J.-P. Burnet, A.C. Butterworth, R. Calaga, E. Jensen, V. Mertens, A. Milanese, M. Nonis, N. Schwerg, L.J. Tavian, J. Wenninger CERN, Geneva, Switzerland A.P. Blondel, M. Koratzinos DPNC, Genève, Switzerland Sh. Gorgi Zadeh Rostock University, Faculty of Computer Science and Electrical Engineering, Rostock, Germany K. Oide KEK, Ibaraki, Japan L. Rinolfi JUAS, Archamps, France
	Funding: Supported by the European Commission under the Capacities 7th Framework Programme project EuCARD-2, grant agreement 312453. We present a first rough estimate for the electrical power consumption of the FCC-ee lepton collider. This electrical power is dominated by the RF system, which provides the motivation for the ongoing R&D on highly efficient RF power sources. Other contributions come from the warm arc magnets, the cryogenics systems, cooling, ventilation, general services, the particle-physics detectors, and the injector complex.
DOI •	reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-THPOR024
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Luminosity Targets for FCC-hh

1523

F. Zimmermann, M. Benedikt, X. Buffat, D. Schulte
CERN, Geneva, Switzerland

Funding: Supported by the European Commission under the Capacities 7th Framework Programme project EuCARD-2, grant agreement 312453, and under the HORIZON 2020 project EuroCirCol, grant agreement 654305.
We discuss the choice of target values for the peak and integrated luminosity of a future high-energy frontier circular hadron collider (FCC-hh). We review the arguments on the physics reach of a hadron collider. Next we show that accelerator constraints will limit the beam current and the turnaround time. Taking these limits into account, we derive an expression for the ultimate integrated luminosity per year, depending on a possible pile-up limit imposed by the physics experiments. We finally benchmark our result against the planned two phases of FCC-hh.

DOI •

reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-TUPMW037

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPOR022

Design of Beam Optics for the FCC-ee Collider Ring

3821

K. Oide, K. Ohmi, D. Zhou
KEK, Ibaraki, Japan
M. Aiba
PSI, Villigen PSI, Switzerland
S. Aumon, M. Benedikt, H. Burkhardt, A. Doblhammer, B. Härer, B.J. Holzer, J.M. Jowett, M. Koratzinos, L.E. Medina Medrano, Y. Papaphilippou, J. Wenninger, F. Zimmermann
CERN, Geneva, Switzerland
A.P. Blondel
DPNC, Genève, Switzerland
A.V. Bogomyagkov, I. Koop, E.B. Levichev, P.A. Piminov, D.N. Shatilov, D.B. Shwartz, S.V. Sinyatkin
BINP SB RAS, Novosibirsk, Russia
M. Boscolo
INFN/LNF, Frascati (Roma), Italy
Y. Cai, M.K. Sullivan, U. Wienands
SLAC, Menlo Park, California, USA

A design of beam optics will be presented for the FCC-ee double-ring collider. The main characteristics are 45 to 175 GeV beam energy, 100 km circumference with two IPs/ring, 30 mrad crossing angle at the IP, crab-waist scheme with local chromaticity correction system, and "tapering" of the magnets along with the local beam energy. An asymmetric layout near the interaction region suppresses the critical energy of synchrotron radiation toward the detector at the IP less than 100 keV, while keeping the geometry as close as to the FCC-hh beam line. A sufficient transverse/longitudinal dynamic aperture is obtained to assure the lifetime with beamstrahlung and top-up injection. The synchrotron radiation in all magnets, the IP solenoid and its compensation, nonlinearity of the final quadrupoles are taken into account.

DOI •

reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-THPOR022

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPOR023

The FCC-ee Interaction Region Magnet Design

3824

M. Koratzinos, A.P. Blondel
DPNC, Genève, Switzerland
M. Benedikt, B.J. Holzer, F. Zimmermann, J. van Nugteren
CERN, Geneva, Switzerland
A.V. Bogomyagkov, S.V. Sinyatkin
BINP SB RAS, Novosibirsk, Russia
K. Oide
KEK, Ibaraki, Japan

The design of the region close to the interaction point of the FCC-ee experiments is especially challenging. The beams collide at an angle (±15 mrad) in the high-field region of the detector solenoid. Moreover, the very low vertical β* of the machine necessitates that the final focusing quadrupoles have a distance from the IP (L*) of around 2 m and therefore are inside the main detector solenoid. The beams should be screened from the effect of the detector magnetic field, and the emittance blow-up due to vertical dispersion in the interaction region should be minimized, while leaving enough space for detector components. Crosstalk between the two final focus quadrupoles, only about 6 cm apart at the tip, should also be minimized.

DOI •

reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-THPOR023

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPOR024

Electrical Power Budget for FCC-ee

3828

F. Zimmermann, S. Aull, M. Benedikt, D. Bozzini, O. Brunner, J.-P. Burnet, A.C. Butterworth, R. Calaga, E. Jensen, V. Mertens, A. Milanese, M. Nonis, N. Schwerg, L.J. Tavian, J. Wenninger
CERN, Geneva, Switzerland
A.P. Blondel, M. Koratzinos
DPNC, Genève, Switzerland
Sh. Gorgi Zadeh
Rostock University, Faculty of Computer Science and Electrical Engineering, Rostock, Germany
K. Oide
KEK, Ibaraki, Japan
L. Rinolfi
JUAS, Archamps, France

Funding: Supported by the European Commission under the Capacities 7th Framework Programme project EuCARD-2, grant agreement 312453.
We present a first rough estimate for the electrical power consumption of the FCC-ee lepton collider. This electrical power is dominated by the RF system, which provides the motivation for the ongoing R&D on highly efficient RF power sources. Other contributions come from the warm arc magnets, the cryogenics systems, cooling, ventilation, general services, the particle-physics detectors, and the injector complex.

DOI •

reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-THPOR024

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)