Status of the STAR Project

Bacci, Alberto; Agostino, Raffaele; Alesini, David; Barberis, Riccardo; Bellaveglia, Marco; Beltrano, Joseph; Bisesto, Fabrizio; Borgese, Gianluca; Buonomo, Bruno; Cianchi, Alessandro; D'Auria, Gerardo; Di Pirro, Giampiero; Di Raddo, Gianluca; Drebot, Illya; Esposito, Adolfo; Fabris, Alessandro; Gallo, Alessandro; Ghedini, Mauro; Ghigo, Andrea; Iungo, Francesco; Marazzi, Marco; Martire, Fiorello; Pace, Calogero; Pellegrino, Luigi; Petrillo, Vittoria; Puppin, Ezio; Rossetti Conti, Marcello; Serafini, Luca; Stella, Angelo; Torri, Verardo; Vaccarezza, Cristina

doi:10.18429/JACoW-IPAC2016-TUPOW004

Joint Accelerator Conferences Website

The Joint Accelerator Conferences Website (JACoW) is an international collaboration that publishes the proceedings of accelerator conferences held around the world.

RIS citation export for TUPOW004: Status of the STAR Project

TY - CONF
AU - Bacci, A.
AU - Agostino, R.G.
AU - Alesini, D.
AU - Barberis, R.
AU - Bellaveglia, M.
AU - Beltrano, J.J.
AU - Bisesto, F.G.
AU - Borgese, G.
AU - Buonomo, B.
AU - Cianchi, A.
AU - D'Auria, G.
AU - Di Pirro, G.
AU - Di Raddo, G.
AU - Drebot, I.
AU - Esposito, A.
AU - Fabris, A.
AU - Gallo, A.
AU - Ghedini, M.
AU - Ghigo, A.
AU - Iungo, F.
AU - Marazzi, M.
AU - Martire, F.
AU - Pace, C.
AU - Pellegrino, L.
AU - Petrillo, V.
AU - Puppin, E.
AU - Rossetti Conti, M.
AU - Serafini, L.
AU - Stella, A.
AU - Torri, V.
AU - Vaccarezza, C.
ED - Petit-Jean-Genaz, Christine
ED - Kim, Dong Eon
ED - Kim, Kyung Sook
ED - Ko, In Soo
ED - Schaa, Volker RW
TI - Status of the STAR Project
J2 - Proc. of IPAC2016, Busan, Korea, May 8-13, 2016
C1 - Busan, Korea
T2 - International Particle Accelerator Conference
T3 - 7
LA - english
AB - This paper reports on the final design and the work in progress on the STAR project (IPAC2014:WEPRO115), which is under construction at the Univ. of Calabria (Italy). The project is devoted to the construction of an advanced Thomson source of monochromatic tunable, ps-long, polarized X-ray beams, ranging from 40 up to 140 KeV . At present the buildings and main plants have been completed as the acquisition of main components: the RF photo-injector, the accelerating section, laser systems for collision and photo-cathode, RF Power Source and magnets are ready to start installation and site acceptance tests. The design of laser lines is complete and simulated by ZEMAX, aiming to minimize energy losses, optical distortions and providing a tunable experimental setup as well. The RF power network is close to be tested, it's based on a 55MW (2.5us pulse) S-band Klystron driven by a 500kV Pulse Forming Network based modulator and a Low Level RF system, running at 100 Hz. The Control System is been designed using EPICS and allows to manage easily and fastly each machine parameter. We expect to start commissioning the machine by the end of 2016 and obtain the first collisions within the first part of 2017.
PB - JACoW
CP - Geneva, Switzerland
SP - 1747
EP - 1750
KW - laser
KW - electron
KW - focusing
KW - controls
KW - vacuum
DA - 2016/06
PY - 2016
SN - 978-3-95450-147-2
DO - 10.18429/JACoW-IPAC2016-TUPOW004
UR - http://jacow.org/ipac2016/papers/tupow004.pdf
ER -