IPAC2011 - Classification: 07 Accelerator Technology / T13 Cryogenics

Paper	Title	Page
WEPO035	Thermal Performance of the S1-Global Cryomodule for ILC	2472
	N. Ohuchi, M. Akemoto, S. Fukuda, K. Hara, H. Hayano, N. Higashi, E. Kako, Y. Kojima, Y. Kondo, T. Matsumoto, S. Michizono, T. Miura, H. Nakai, H. Nakajima, K. Nakanishi, S. Noguchi, T. Saeki, M. Satoh, T. Shidara, T. Shishido, T. Takenaka, A. Terashima, N. Toge, K. Tsuchiya, K. Watanabe, S. Yamaguchi, A. Yamamoto, Y. Yamamoto, K. Yokoya KEK, Ibaraki, Japan T.T. Arkan, S. Barbanotti, H. Carter, M.S. Champion, A. Hocker, R.D. Kephart, J.S. Kerby, D.V. Mitchell, T.J. Peterson, Y.M. Pischalnikov, M.C. Ross Fermilab, Batavia, USA A. Bosotti, C. Pagani, R. Paparella, P. Pierini INFN/LASA, Segrate (MI), Italy D. Kostin, L. Lilje, A. Matheisen, W.-D. Möller, N.J. Walker, H. Weise DESY, Hamburg, Germany
	The S1-Global program is the international research collaboration among INFN, FNAL, DESY, SLAC and KEK as one of the GDE R&D for construction of ILC. The S1-Global cryomodule consists of two half-size cryomodules of 6 meter. One was designed by IFNF, and it contained two FNAL cavities and two DESY cavities. The associated components, like input couplers and RF cables, were same as the TTF-III cryomodule. The other was designed by KEK, and the thermal design was based on the TTF-III cryomodule. This cryomodule contains four KEK cavities with the associated components which were designed by KEK. For characterizing the thermal performances of two cryomodules, the static heat load and the temperature profiles of the cold components were measured. The temperature profiles of the components were compared between two cryomodules and the static heat load was evaluated with the design values of the cryomodules. The dynamic losses of the DESY, FNAL and two KEK cavities at their maximum operative gradients were measured and, with the measured losses, Q values were calculated. In this paper, we will make the summary of the thermal measurements of the S1-Global cryomodule.

WEPO036	Design of a Cryogenic Regulation Valve Box for SRF Operation at TPS	2475
	M.H. Chang, L.-H. Chang, L.J. Chen, F.-T. Chung, F. Z. Hsiao, M.-C. Lin, Y.-H. Lin, C.H. Lo, H.H. Tsai, Ch. Wang, T.-T. Yang, M.-S. Yeh, T.-C. Yu NSRRC, Hsinchu, Taiwan L.L. Han, M.H. Tsai NTUT, Taiwan
	A 3-GeV light source named Taiwan Photon Source (TPS) at National Synchrotron Radiation Research Center (NSRRC) is under construction, and is scheduled for commissioning in 2013/2014. An SRF module of KEKB type has been selected for the TPS as the accelerating cavity of its storage ring. The SRF valve boxes, as part of the cryogenic transfer system, stabilize the cryogenic operational conditions required for various needs of SRF operation. The SRF operation requires a large dynamic variation in the cryogenic loading that challenges appropriate sizing of the cryogenic regulation valves to minimize the pressure drop and concurrently to maintain a fine regulation of pressure. Here, we report our design considerations for an SRF valve box with emphasis on highly stabilizing the helium pressure for SRF operation with a dual-return valve scheme. The estimated fluctuations of pressure due to finite accuracy of the valve opening decrease to a tenth of what is obtained from the conventional single return-valve scheme.

Paper

Title

Page

Thermal Performance of the S1-Global Cryomodule for ILC

2472

N. Ohuchi, M. Akemoto, S. Fukuda, K. Hara, H. Hayano, N. Higashi, E. Kako, Y. Kojima, Y. Kondo, T. Matsumoto, S. Michizono, T. Miura, H. Nakai, H. Nakajima, K. Nakanishi, S. Noguchi, T. Saeki, M. Satoh, T. Shidara, T. Shishido, T. Takenaka, A. Terashima, N. Toge, K. Tsuchiya, K. Watanabe, S. Yamaguchi, A. Yamamoto, Y. Yamamoto, K. Yokoya
KEK, Ibaraki, Japan
T.T. Arkan, S. Barbanotti, H. Carter, M.S. Champion, A. Hocker, R.D. Kephart, J.S. Kerby, D.V. Mitchell, T.J. Peterson, Y.M. Pischalnikov, M.C. Ross
Fermilab, Batavia, USA
A. Bosotti, C. Pagani, R. Paparella, P. Pierini
INFN/LASA, Segrate (MI), Italy
D. Kostin, L. Lilje, A. Matheisen, W.-D. Möller, N.J. Walker, H. Weise
DESY, Hamburg, Germany

The S1-Global program is the international research collaboration among INFN, FNAL, DESY, SLAC and KEK as one of the GDE R&D for construction of ILC. The S1-Global cryomodule consists of two half-size cryomodules of 6 meter. One was designed by IFNF, and it contained two FNAL cavities and two DESY cavities. The associated components, like input couplers and RF cables, were same as the TTF-III cryomodule. The other was designed by KEK, and the thermal design was based on the TTF-III cryomodule. This cryomodule contains four KEK cavities with the associated components which were designed by KEK. For characterizing the thermal performances of two cryomodules, the static heat load and the temperature profiles of the cold components were measured. The temperature profiles of the components were compared between two cryomodules and the static heat load was evaluated with the design values of the cryomodules. The dynamic losses of the DESY, FNAL and two KEK cavities at their maximum operative gradients were measured and, with the measured losses, Q values were calculated. In this paper, we will make the summary of the thermal measurements of the S1-Global cryomodule.

WEPO036

Design of a Cryogenic Regulation Valve Box for SRF Operation at TPS

2475

M.H. Chang, L.-H. Chang, L.J. Chen, F.-T. Chung, F. Z. Hsiao, M.-C. Lin, Y.-H. Lin, C.H. Lo, H.H. Tsai, Ch. Wang, T.-T. Yang, M.-S. Yeh, T.-C. Yu
NSRRC, Hsinchu, Taiwan
L.L. Han, M.H. Tsai
NTUT, Taiwan

A 3-GeV light source named Taiwan Photon Source (TPS) at National Synchrotron Radiation Research Center (NSRRC) is under construction, and is scheduled for commissioning in 2013/2014. An SRF module of KEKB type has been selected for the TPS as the accelerating cavity of its storage ring. The SRF valve boxes, as part of the cryogenic transfer system, stabilize the cryogenic operational conditions required for various needs of SRF operation. The SRF operation requires a large dynamic variation in the cryogenic loading that challenges appropriate sizing of the cryogenic regulation valves to minimize the pressure drop and concurrently to maintain a fine regulation of pressure. Here, we report our design considerations for an SRF valve box with emphasis on highly stabilizing the helium pressure for SRF operation with a dual-return valve scheme. The estimated fluctuations of pressure due to finite accuracy of the valve opening decrease to a tenth of what is obtained from the conventional single return-valve scheme.