IPAC2011 - List of Authors (Vorozhtsov, A.S.)

Paper	Title	Page
WEPO017	Status of CLIC Magnets Studies	2433
	M. Modena CERN, Geneva, Switzerland A.S. Vorozhtsov JINR, Dubna, Moscow Region, Russia
	R&D Magnets activities for CLIC Project have now entered a new phase with the design & manufacturing of several prototypes investigating the most challenging aspects of the CLIC Project. As concerning the CLIC Magnet System, challenges can be related to pure technical aspects (e.g. the Final Focus QD0 quadrupole where a gradient of more than 550 T/m is requested) or to industrial production choices (e.g. the Main Beam Quadrupoles where compactness and high tolerances are requested for the mechanical assembly, or the Drive Beam Quadrupoles where a productions of more than 40000 units is needed). In this paper the key aspects of the magnets under studies such as the Drive Beam, Main Beam and the Final Focus quadrupoles will be presented and discussed. Results on prototypes under assembly and measured performances will also be addressed.

WEPO018	Status of the New Linac4 Magnets at CERN	2436
	Th. Zickler, F. Borgnolutti, O. Crettiez, A. Newborough, L. Vanherpe CERN, Geneva, Switzerland A.S. Vorozhtsov JINR, Dubna, Moscow Region, Russia
	Linac4 is a new H⁻ linear accelerator at CERN replacing Linac2 as injector to the PS Booster. Almost 100 electro-magnets of different types are needed for the Linac4 project. Following a detailed analysis of the requirements and constraints, several magnet designs have been studied and are well advanced. This paper presents the design considerations, main parameters and characteristics of the new Linac4 magnets and summarizes the present status.

Paper

Title

Page

Status of CLIC Magnets Studies

2433

M. Modena
CERN, Geneva, Switzerland
A.S. Vorozhtsov
JINR, Dubna, Moscow Region, Russia

R&D Magnets activities for CLIC Project have now entered a new phase with the design & manufacturing of several prototypes investigating the most challenging aspects of the CLIC Project. As concerning the CLIC Magnet System, challenges can be related to pure technical aspects (e.g. the Final Focus QD0 quadrupole where a gradient of more than 550 T/m is requested) or to industrial production choices (e.g. the Main Beam Quadrupoles where compactness and high tolerances are requested for the mechanical assembly, or the Drive Beam Quadrupoles where a productions of more than 40000 units is needed). In this paper the key aspects of the magnets under studies such as the Drive Beam, Main Beam and the Final Focus quadrupoles will be presented and discussed. Results on prototypes under assembly and measured performances will also be addressed.

WEPO018

Status of the New Linac4 Magnets at CERN

2436

Th. Zickler, F. Borgnolutti, O. Crettiez, A. Newborough, L. Vanherpe
CERN, Geneva, Switzerland
A.S. Vorozhtsov
JINR, Dubna, Moscow Region, Russia

Linac4 is a new H⁻ linear accelerator at CERN replacing Linac2 as injector to the PS Booster. Almost 100 electro-magnets of different types are needed for the Linac4 project. Following a detailed analysis of the requirements and constraints, several magnet designs have been studied and are well advanced. This paper presents the design considerations, main parameters and characteristics of the new Linac4 magnets and summarizes the present status.