IPAC2011 - List of Authors (Satoh, M.)

Paper

Title

Page

S1-Global Module Tests at STF/KEK

38

D. Kostin, K. Jensch, L. Lilje, A. Matheisen, W.-D. Möller, P. Schilling, M. Schmökel, N.J. Walker, H. Weise
DESY, Hamburg, Germany
C. Adolphsen, C.D. Nantista
SLAC, Menlo Park, California, USA
M. Akemoto, S. Fukuda, K. Hara, H. Hayano, N. Higashi, E. Kako, H. Katagiri, Y. Kojima, Y. Kondo, T. Matsumoto, H. Matsushita, S. Michizono, T. Miura, H. Nakai, H. Nakajima, K. Nakanishi, S. Noguchi, N. Ohuchi, T. Saeki, M. Satoh, T. Shidara, T. Shishido, T. Takenaka, A. Terashima, N. Toge, K. Tsuchiya, K. Watanabe, S. Yamaguchi, A. Yamamoto, Y. Yamamoto, K. Yokoya
KEK, Ibaraki, Japan
T.T. Arkan, S. Barbanotti, M.A. Battistoni, H. Carter, M.S. Champion, A. Hocker, R.D. Kephart, J.S. Kerby, D.V. Mitchell, T.J. Peterson, Y.M. Pischalnikov, M.C. Ross, W. Schappert, B.E. Smith
Fermilab, Batavia, USA
A. Bosotti, C. Pagani, R. Paparella, P. Pierini
INFN/LASA, Segrate (MI), Italy

S1-Global collaborative effort of INFN, DESY, FNAL, SLAC and KEK, recently successfully finished at KEK as a part of ILC GDE, is an important milestone for the ILC. International collaboration of three regions, Asia, North America and Europe, proved to be efficient on the construction and cold tests of the accelerating module consisting of 8 SRF cavities; 2 from FNAL, 2 from DESY and 4 from KEK. Three different cavity tuning systems were tested together with two types of high power couplers. The module was cooled down three times which enabled extensive high power tests with cavities, performance limits investigation, Lorentz force detuning tests, simultaneous multiple cavities operation and other activities such as an operation test of distributed RF scheme with low level RF feedback. The results of this S1-Global module test are presented and discussed.

Slides MOODA02 [2.982 MB]

MOPO023

Laser-based Alignment System at the KEKB Injector Linac

529

M. Satoh, N. Iida, T. Suwada
KEK, Ibaraki, Japan
K. Minoshima, S. Telada
AIST, Tsukuba, Japan

A laser-based alignment system is under development at the 500-m-long KEKB injector linac. The original system was designed and constructed more than thirty-years ago, and thus, we are revisiting our alignment system because the previous alignment system has become too obsolete. The new alignment system is again strongly required for the next generation SuperKEKB project. The new laser alignment system is similar to the previous one, which comprises a helium-neon laser and quadrant photodetectors installed in vacuum light pipes. A girder displacement of the accelerating structure can be precisely measured in the direction of the laser-ray trace, where the laser light must stably propagate up to 500-m downstream without any orbital and beam-size fluctuation. We tested the laser-ray propagation and the stability along a 100-m-long beam line under a vacuum condition of 0.1-1 Torr. In this paper, we will report the system description and test results in detail.

MOPO025

Experimental Study on New Laser-based Alignment System utilizing a Sequential Three-point Method at the KEKB Injector Linac

532

T. Suwada, M. Satoh
KEK, Ibaraki, Japan
K. Minoshima, S. Terada
AIST, Tsukuba, Japan

A new laser-based alignment system is under development in order to precisely align accelerator components along an ideal straight line at the 600-m-long KEKB injector linac. A well-known sequential three-point method with Fresnel lenses and a CCD camera is revisited in a preliminary design of the new alignment system. The new alignment system is strongly required in order to stably accelerate high-brightness electron and positron beams with high bunch charges and also to keep the beam stability with higher quality towards the Super B-factory at KEK. A new laser optics has been developed and the laser propagation characteristics has been systematically investigated at a 200-m-long straight section at atmospheric pressure. In this report, the preliminary experimental results are reported along with the basic design of the new laser-based alignment system.

MOPS058

KEKB Linac Wakefield Studies of Comparing Theoretical Calculation, Simulation and Experimental Measurement*

739

L. Zang, N. Iida, Y. Ogawa, M. Satoh, M. Yoshida, D.M. Zhou
KEK, Ibaraki, Japan

For superKEKB, in order to achieve aiming luminosity machine need to run with a nano-beam scheme so that a small beam emittance is critical important. During the beam propagation, the short-range wake field in the accelerating structure will cause the beam instability and emittance growth. In practical, injecting beam with certain offset could compensate wakfield. And beam emittance could be measured by tuning the quadruple known as quadscan method. In this paper, wakefield theoretical calculation, simulation results will be presented. And then the wakefield impact to beam emittance and wakefield compensation will be discussed. Finally, we will show the comparison of the results getting from theoretical calculation and experimental measurement.

WEPO035

Thermal Performance of the S1-Global Cryomodule for ILC

2472

N. Ohuchi, M. Akemoto, S. Fukuda, K. Hara, H. Hayano, N. Higashi, E. Kako, Y. Kojima, Y. Kondo, T. Matsumoto, S. Michizono, T. Miura, H. Nakai, H. Nakajima, K. Nakanishi, S. Noguchi, T. Saeki, M. Satoh, T. Shidara, T. Shishido, T. Takenaka, A. Terashima, N. Toge, K. Tsuchiya, K. Watanabe, S. Yamaguchi, A. Yamamoto, Y. Yamamoto, K. Yokoya
KEK, Ibaraki, Japan
T.T. Arkan, S. Barbanotti, H. Carter, M.S. Champion, A. Hocker, R.D. Kephart, J.S. Kerby, D.V. Mitchell, T.J. Peterson, Y.M. Pischalnikov, M.C. Ross
Fermilab, Batavia, USA
A. Bosotti, C. Pagani, R. Paparella, P. Pierini
INFN/LASA, Segrate (MI), Italy
D. Kostin, L. Lilje, A. Matheisen, W.-D. Möller, N.J. Walker, H. Weise
DESY, Hamburg, Germany

The S1-Global program is the international research collaboration among INFN, FNAL, DESY, SLAC and KEK as one of the GDE R&D for construction of ILC. The S1-Global cryomodule consists of two half-size cryomodules of 6 meter. One was designed by IFNF, and it contained two FNAL cavities and two DESY cavities. The associated components, like input couplers and RF cables, were same as the TTF-III cryomodule. The other was designed by KEK, and the thermal design was based on the TTF-III cryomodule. This cryomodule contains four KEK cavities with the associated components which were designed by KEK. For characterizing the thermal performances of two cryomodules, the static heat load and the temperature profiles of the cold components were measured. The temperature profiles of the components were compared between two cryomodules and the static heat load was evaluated with the design values of the cryomodules. The dynamic losses of the DESY, FNAL and two KEK cavities at their maximum operative gradients were measured and, with the measured losses, Q values were calculated. In this paper, we will make the summary of the thermal measurements of the S1-Global cryomodule.

Paper	Title	Page
MOODA02	S1-Global Module Tests at STF/KEK	38
	D. Kostin, K. Jensch, L. Lilje, A. Matheisen, W.-D. Möller, P. Schilling, M. Schmökel, N.J. Walker, H. Weise DESY, Hamburg, Germany C. Adolphsen, C.D. Nantista SLAC, Menlo Park, California, USA M. Akemoto, S. Fukuda, K. Hara, H. Hayano, N. Higashi, E. Kako, H. Katagiri, Y. Kojima, Y. Kondo, T. Matsumoto, H. Matsushita, S. Michizono, T. Miura, H. Nakai, H. Nakajima, K. Nakanishi, S. Noguchi, N. Ohuchi, T. Saeki, M. Satoh, T. Shidara, T. Shishido, T. Takenaka, A. Terashima, N. Toge, K. Tsuchiya, K. Watanabe, S. Yamaguchi, A. Yamamoto, Y. Yamamoto, K. Yokoya KEK, Ibaraki, Japan T.T. Arkan, S. Barbanotti, M.A. Battistoni, H. Carter, M.S. Champion, A. Hocker, R.D. Kephart, J.S. Kerby, D.V. Mitchell, T.J. Peterson, Y.M. Pischalnikov, M.C. Ross, W. Schappert, B.E. Smith Fermilab, Batavia, USA A. Bosotti, C. Pagani, R. Paparella, P. Pierini INFN/LASA, Segrate (MI), Italy
	S1-Global collaborative effort of INFN, DESY, FNAL, SLAC and KEK, recently successfully finished at KEK as a part of ILC GDE, is an important milestone for the ILC. International collaboration of three regions, Asia, North America and Europe, proved to be efficient on the construction and cold tests of the accelerating module consisting of 8 SRF cavities; 2 from FNAL, 2 from DESY and 4 from KEK. Three different cavity tuning systems were tested together with two types of high power couplers. The module was cooled down three times which enabled extensive high power tests with cavities, performance limits investigation, Lorentz force detuning tests, simultaneous multiple cavities operation and other activities such as an operation test of distributed RF scheme with low level RF feedback. The results of this S1-Global module test are presented and discussed.
	Slides MOODA02 [2.982 MB]

MOPO023	Laser-based Alignment System at the KEKB Injector Linac	529
	M. Satoh, N. Iida, T. Suwada KEK, Ibaraki, Japan K. Minoshima, S. Telada AIST, Tsukuba, Japan
	A laser-based alignment system is under development at the 500-m-long KEKB injector linac. The original system was designed and constructed more than thirty-years ago, and thus, we are revisiting our alignment system because the previous alignment system has become too obsolete. The new alignment system is again strongly required for the next generation SuperKEKB project. The new laser alignment system is similar to the previous one, which comprises a helium-neon laser and quadrant photodetectors installed in vacuum light pipes. A girder displacement of the accelerating structure can be precisely measured in the direction of the laser-ray trace, where the laser light must stably propagate up to 500-m downstream without any orbital and beam-size fluctuation. We tested the laser-ray propagation and the stability along a 100-m-long beam line under a vacuum condition of 0.1-1 Torr. In this paper, we will report the system description and test results in detail.

MOPO025	Experimental Study on New Laser-based Alignment System utilizing a Sequential Three-point Method at the KEKB Injector Linac	532
	T. Suwada, M. Satoh KEK, Ibaraki, Japan K. Minoshima, S. Terada AIST, Tsukuba, Japan
	A new laser-based alignment system is under development in order to precisely align accelerator components along an ideal straight line at the 600-m-long KEKB injector linac. A well-known sequential three-point method with Fresnel lenses and a CCD camera is revisited in a preliminary design of the new alignment system. The new alignment system is strongly required in order to stably accelerate high-brightness electron and positron beams with high bunch charges and also to keep the beam stability with higher quality towards the Super B-factory at KEK. A new laser optics has been developed and the laser propagation characteristics has been systematically investigated at a 200-m-long straight section at atmospheric pressure. In this report, the preliminary experimental results are reported along with the basic design of the new laser-based alignment system.

MOPS058	KEKB Linac Wakefield Studies of Comparing Theoretical Calculation, Simulation and Experimental Measurement*	739
	L. Zang, N. Iida, Y. Ogawa, M. Satoh, M. Yoshida, D.M. Zhou KEK, Ibaraki, Japan
	For superKEKB, in order to achieve aiming luminosity machine need to run with a nano-beam scheme so that a small beam emittance is critical important. During the beam propagation, the short-range wake field in the accelerating structure will cause the beam instability and emittance growth. In practical, injecting beam with certain offset could compensate wakfield. And beam emittance could be measured by tuning the quadruple known as quadscan method. In this paper, wakefield theoretical calculation, simulation results will be presented. And then the wakefield impact to beam emittance and wakefield compensation will be discussed. Finally, we will show the comparison of the results getting from theoretical calculation and experimental measurement.

WEPO035	Thermal Performance of the S1-Global Cryomodule for ILC	2472
	N. Ohuchi, M. Akemoto, S. Fukuda, K. Hara, H. Hayano, N. Higashi, E. Kako, Y. Kojima, Y. Kondo, T. Matsumoto, S. Michizono, T. Miura, H. Nakai, H. Nakajima, K. Nakanishi, S. Noguchi, T. Saeki, M. Satoh, T. Shidara, T. Shishido, T. Takenaka, A. Terashima, N. Toge, K. Tsuchiya, K. Watanabe, S. Yamaguchi, A. Yamamoto, Y. Yamamoto, K. Yokoya KEK, Ibaraki, Japan T.T. Arkan, S. Barbanotti, H. Carter, M.S. Champion, A. Hocker, R.D. Kephart, J.S. Kerby, D.V. Mitchell, T.J. Peterson, Y.M. Pischalnikov, M.C. Ross Fermilab, Batavia, USA A. Bosotti, C. Pagani, R. Paparella, P. Pierini INFN/LASA, Segrate (MI), Italy D. Kostin, L. Lilje, A. Matheisen, W.-D. Möller, N.J. Walker, H. Weise DESY, Hamburg, Germany
	The S1-Global program is the international research collaboration among INFN, FNAL, DESY, SLAC and KEK as one of the GDE R&D for construction of ILC. The S1-Global cryomodule consists of two half-size cryomodules of 6 meter. One was designed by IFNF, and it contained two FNAL cavities and two DESY cavities. The associated components, like input couplers and RF cables, were same as the TTF-III cryomodule. The other was designed by KEK, and the thermal design was based on the TTF-III cryomodule. This cryomodule contains four KEK cavities with the associated components which were designed by KEK. For characterizing the thermal performances of two cryomodules, the static heat load and the temperature profiles of the cold components were measured. The temperature profiles of the components were compared between two cryomodules and the static heat load was evaluated with the design values of the cryomodules. The dynamic losses of the DESY, FNAL and two KEK cavities at their maximum operative gradients were measured and, with the measured losses, Q values were calculated. In this paper, we will make the summary of the thermal measurements of the S1-Global cryomodule.