IPAC2011 - List of Authors (Sanz, S.)

Paper	Title	Page
MOPO026	Design, Manufacturing and Tests of Closed-loop Quadrupole Mover Prototypes for European XFEL	535
	J. Munilla, J. Calero, J.M. Cela-Ruiz, L. García-Tabarés, A. Guirao, J.L. Gutiérrez, T. Martínez de Alvaro, E. Molina Marinas, S. Sanz, F. Toral, C. Vazquez CIEMAT, Madrid, Spain
	Funding: Work partially supported by Spanish Ministry of Science and Innovation under SEI Resolution on 17-September-2009 In this report the development of a quadrupole mover with submicron repeatability is reported, which will be used in the intersections of the Undulator Systems of the European XFEL (EXFEL). It is part of the Spanish in-kind contribution to this facility. The main specifications include submicron repeatability for a 70 kg quadrupole magnet within compact dimensions and a ±1.5 mm stroke in the vertical and horizontal direction. Compact linear actuators based on 5-phase stepping motors have been chosen. Vertical actuator works in a wedge configuration to take mechanical advantage. A closed-loop control system has been developed to achieve this repeatability. For the feedback, one LVDT sensor for each axis was used. Mechanical switches are used to limit movement. In addition, hard-stops are included for emergency. Prototyping stage is done and a serial production of more than 90 devices is expected, so intense work has been done to achieve a reliable industrial production and validation. In this report, results of mechanical measurements including reproducibility, tests of different operation strategies and critical situations will be reported.

WEPO030	Fabrication and Testing of the First Magnet Package Prototype for the SRF Linac of LIPAc	2463
	S. Sanz, J. Calero, F.M. De Aragon, J.L. Gutiérrez, I. Moya, I. Podadera, F. Toral, J.G.S. de la Gama CIEMAT, Madrid, Spain N. Bazin, P. Bosland, P. Bredy, N. Grouas, P. Hardy, V.M. Hennion, J. Migne, F. Orsini, B. Renard CEA/DSM/IRFU, France G. Disset, J. Relland CEA, Gif-sur-Yvette, France H. Jenhani CEA/IRFU, Gif-sur-Yvette, France E.N. Zaplatin FZJ, Jülich, Germany
	Funding: Work partially supported by Spanish Ministry of Science and Innovation under project AIC10-A-000441 and ENE2009-11230. The IFMIF-EVEDA accelerator will be a 9 MeV, 125 mA CW deuteron accelerator which aims to validate the technology that will be used in the future IFMIF accelerator. The SRF Linac design is based on superconducting Half Wave Resonators (HWR) cavities operating at 4.4 K. Due to space charge associated to the high intensity beam, a short, but strong, superconducting focusing magnet package is necessary between cavities. The selected configuration has been a superconducting NbTi solenoid acting as a magnetic lens and a concentric outer solenoid in antiparallel configuration to reduce the dangerous stray field on the cavities. The selected arrangement for the steerers is a pair of parallel racetrack coils for each vertical and horizontal axis. This paper describes the manufacturing techniques of the different coils, and the test realized in warm and cold conditions, with special attention to the training test of the main solenoid, as the nominal working point in the load line is very high (86.2%).

THPC174	Manufacturing and Testing of the First Phase Shifter Prototypes Built by CIEMAT for the European-XFEL	3308
	I. Moya, J. Calero, J.M. Cela-Ruiz, L. García-Tabarés, A. Guirao, J.L. Gutiérrez, L.M. Martinez Fresno, T. Martínez de Alvaro, E. Molina Marinas, A.L. Pardillo, L. Sanchez, S. Sanz, F. Toral, C. Vazquez, J.G.S. de la Gama CIEMAT, Madrid, Spain
	Funding: Work partially supported by the Spanish Ministry of Science and Innovation under SEI Resolution on 17-September-2009. The European X-ray Free Electron Laser (EXFEL) will be based on a 10 to 17.5 GeV electron linac. Its beam will be used in three undulator systems to obtain ultra-brilliant X-ray flashes from 0.1 to 6 nanometres for experimentation. The undulator systems are formed by 5m long undulator segments and 1.1m long intersections in between. They accommodate a quadrupole on top of a precision mover, a beam position monitor, two air coil correctors and a phase shifter. The function of the phase shifter is to adjust the phase of the electron beam with respect to that of the radiation field when the wavelength is changed by tuning the gap. In this context, CIEMAT will deliver 92 phase shifters, as part of the Spanish in-kind contribution to the EXFEL project. This paper describes the engineering design, the manufacturing techniques and the mechanical and magnetic tests realized on the first prototypes.

Paper

Title

Page

Design, Manufacturing and Tests of Closed-loop Quadrupole Mover Prototypes for European XFEL

535

J. Munilla, J. Calero, J.M. Cela-Ruiz, L. García-Tabarés, A. Guirao, J.L. Gutiérrez, T. Martínez de Alvaro, E. Molina Marinas, S. Sanz, F. Toral, C. Vazquez
CIEMAT, Madrid, Spain

Funding: Work partially supported by Spanish Ministry of Science and Innovation under SEI Resolution on 17-September-2009
In this report the development of a quadrupole mover with submicron repeatability is reported, which will be used in the intersections of the Undulator Systems of the European XFEL (EXFEL). It is part of the Spanish in-kind contribution to this facility. The main specifications include submicron repeatability for a 70 kg quadrupole magnet within compact dimensions and a ±1.5 mm stroke in the vertical and horizontal direction. Compact linear actuators based on 5-phase stepping motors have been chosen. Vertical actuator works in a wedge configuration to take mechanical advantage. A closed-loop control system has been developed to achieve this repeatability. For the feedback, one LVDT sensor for each axis was used. Mechanical switches are used to limit movement. In addition, hard-stops are included for emergency. Prototyping stage is done and a serial production of more than 90 devices is expected, so intense work has been done to achieve a reliable industrial production and validation. In this report, results of mechanical measurements including reproducibility, tests of different operation strategies and critical situations will be reported.

WEPO030

Fabrication and Testing of the First Magnet Package Prototype for the SRF Linac of LIPAc

2463

S. Sanz, J. Calero, F.M. De Aragon, J.L. Gutiérrez, I. Moya, I. Podadera, F. Toral, J.G.S. de la Gama
CIEMAT, Madrid, Spain
N. Bazin, P. Bosland, P. Bredy, N. Grouas, P. Hardy, V.M. Hennion, J. Migne, F. Orsini, B. Renard
CEA/DSM/IRFU, France
G. Disset, J. Relland
CEA, Gif-sur-Yvette, France
H. Jenhani
CEA/IRFU, Gif-sur-Yvette, France
E.N. Zaplatin
FZJ, Jülich, Germany

Funding: Work partially supported by Spanish Ministry of Science and Innovation under project AIC10-A-000441 and ENE2009-11230.
The IFMIF-EVEDA accelerator will be a 9 MeV, 125 mA CW deuteron accelerator which aims to validate the technology that will be used in the future IFMIF accelerator. The SRF Linac design is based on superconducting Half Wave Resonators (HWR) cavities operating at 4.4 K. Due to space charge associated to the high intensity beam, a short, but strong, superconducting focusing magnet package is necessary between cavities. The selected configuration has been a superconducting NbTi solenoid acting as a magnetic lens and a concentric outer solenoid in antiparallel configuration to reduce the dangerous stray field on the cavities. The selected arrangement for the steerers is a pair of parallel racetrack coils for each vertical and horizontal axis. This paper describes the manufacturing techniques of the different coils, and the test realized in warm and cold conditions, with special attention to the training test of the main solenoid, as the nominal working point in the load line is very high (86.2%).

THPC174

Manufacturing and Testing of the First Phase Shifter Prototypes Built by CIEMAT for the European-XFEL

3308

I. Moya, J. Calero, J.M. Cela-Ruiz, L. García-Tabarés, A. Guirao, J.L. Gutiérrez, L.M. Martinez Fresno, T. Martínez de Alvaro, E. Molina Marinas, A.L. Pardillo, L. Sanchez, S. Sanz, F. Toral, C. Vazquez, J.G.S. de la Gama
CIEMAT, Madrid, Spain

Funding: Work partially supported by the Spanish Ministry of Science and Innovation under SEI Resolution on 17-September-2009.
The European X-ray Free Electron Laser (EXFEL) will be based on a 10 to 17.5 GeV electron linac. Its beam will be used in three undulator systems to obtain ultra-brilliant X-ray flashes from 0.1 to 6 nanometres for experimentation. The undulator systems are formed by 5m long undulator segments and 1.1m long intersections in between. They accommodate a quadrupole on top of a precision mover, a beam position monitor, two air coil correctors and a phase shifter. The function of the phase shifter is to adjust the phase of the electron beam with respect to that of the radiation field when the wavelength is changed by tuning the gap. In this context, CIEMAT will deliver 92 phase shifters, as part of the Spanish in-kind contribution to the EXFEL project. This paper describes the engineering design, the manufacturing techniques and the mechanical and magnetic tests realized on the first prototypes.