IPAC2011 - List of Authors (Mey, S.)

Paper	Title	Page
TUPC033	Verifying the Single Bunch Capability of the New Injector at ELSA*	1072
	S. Mey, O. Boldt, W. Hillert, N. Hofmann, F. Klarner, D. Krönung, A. Roth, M. Schedler ELSA, Bonn, Germany S. Aderhold DESY, Hamburg, Germany
	Funding: Funded by the DFG within the SFB / TR 16 and the Helmholtz Alliance HA 10¹ "Physics at the Terascale". In order to enhance the operating capabilities of the Bonn University Accelerator Facility, ELSA, a new injector is currently under commissioning. One of its main purpose is to allow a single pulse mode. The injector produces a single electron bunch with 1.5 A pulse current. Design and optimization of the injector have been performed with EGUN, PARMELA and numerical simulations based on the numerical integration of the paraxial equation. A 1 ns long pulse is produced by a thermionic electron source with 90 kV anode - cathode voltage, then compressed and pre-accelerated by a subsequent 500 MHz RF cavity and a four-cell travelling wave buncher. Finally, the bunch will be accelerated to 20 MeV by the main LINAC section. Measurements have been conducted concerning the resulting pulse length and pulse charge to confirm the predictions made by simulations and to investigate the efficiency of the injector system.

Paper

Title

Page

Verifying the Single Bunch Capability of the New Injector at ELSA*

1072

S. Mey, O. Boldt, W. Hillert, N. Hofmann, F. Klarner, D. Krönung, A. Roth, M. Schedler
ELSA, Bonn, Germany
S. Aderhold
DESY, Hamburg, Germany

Funding: Funded by the DFG within the SFB / TR 16 and the Helmholtz Alliance HA 10¹ "Physics at the Terascale".
In order to enhance the operating capabilities of the Bonn University Accelerator Facility, ELSA, a new injector is currently under commissioning. One of its main purpose is to allow a single pulse mode. The injector produces a single electron bunch with 1.5 A pulse current. Design and optimization of the injector have been performed with EGUN, PARMELA and numerical simulations based on the numerical integration of the paraxial equation. A 1 ns long pulse is produced by a thermionic electron source with 90 kV anode - cathode voltage, then compressed and pre-accelerated by a subsequent 500 MHz RF cavity and a four-cell travelling wave buncher. Finally, the bunch will be accelerated to 20 MeV by the main LINAC section. Measurements have been conducted concerning the resulting pulse length and pulse charge to confirm the predictions made by simulations and to investigate the efficiency of the injector system.