IPAC2011 - List of Authors (Meusel, O.)

Paper	Title	Page
MOPC006	A Coupled RFQ-IH Combination for the Neutron Source FRANZ	74
	M. Heilmann, O. Meusel, D. Mäder, U. Ratzinger, A. Schempp IAP, Frankfurt am Main, Germany
	Funding: HIC for FAIR The Frankfurt Neutron Source at the Stern-Gerlach-Zentrum is driven by a 2 MeV proton linac consisting of a 4-rod-radio-frequency-quadrupol (RFQ) and an 8 gap IH-DTL structure. RFQ and IH cavity will be powered by only one radio frequency (RF) amplifier to reduce costs. The RF-amplifier of the RFQ-IH combination is coupled into the RFQ. Internal inductive coupling along the axis connects the RFQ with the IH cavity ensuring the required power transition as well as a fixed phase relation between the two structures. The main acceleration of 120 keV up to 2.03 MeV will be reached by the RFQ-IH combination with 175 MHz and at a total length of 2.3 m. The losses in the RFQ-IH combination are about 200 kW.

MOPS029	Experiments with a Fast Chopper System for Intense Ion Beams	664
	H. Dinter, M. Droba, M. Lotz, O. Meusel, I. Müller, D. Noll, U. Ratzinger, K. Schulte, C. Wagner, C. Wiesner IAP, Frankfurt am Main, Germany
	Chopper systems are used to pulse charged particle beams. In most cases, electric deflection systems are used to generate beam pulses of defined lengths and appropriate repetition rates. At high beam intensities, the field distribution of the chopper system needs to be adapted precisely to the beam dynamics in order to avoid aberrations. An additional challenge is a robust design which guarantees reliable operation. For the Frankfurt Neutron Source FRANZ, an E×B chopper system is being developed which combines static magnetic deflection with a pulsed electric field in a Wien filter configuration. It will generate proton pulses with a flat top of 50 ns at a repetition rate of 250 kHz for 120 keV, 200 mA beams. For the electric deflection, pre-experiments with static and pulsed fields were performed using a helium ion beam. In pulsed mode operation, ion beams of different energies were deflected with voltages of up to ±6 kV and the resulting response was measured using a beam current transformer. A comparison between experiments and theoretical calculations as well as numerical simulations are presented.

MOPS030	Beam Dynamics of the FRANZ Bunch Compressor using Realistic Fields with a Focus on the Rebuncher Cavities	667
	D. Noll, L.P. Chau, M. Droba, O. Meusel, H. Podlech, U. Ratzinger, C. Wiesner IAP, Frankfurt am Main, Germany
	Funding: Work supported by HIC for FAIR. The ARMADILLO bunch compressor currently being designed at IAP is capable of reaching a longitudinal pulse compression ratio of 45 for proton beams of 150 mA at 2 MeV. It will provide one nanosecond proton pulses with a peak current of 7.7 A. The system guides nine linacμbunches deflected by a 5 MHz rf kicker and uses four dipole magnets - two homogeneous and two with field gradients - to merge them on the target. For longitudinal focusing and an energy variation of ±200 keV two multitrack rf cavities are included. ARMADILLO will be installed at the end of the Frankfurt Neutron Source FRANZ making use of the unique 250 kHz time structure. This contribution will provide an overview of the layout of the system as well as recent advances in component design and beam dynamics of the compressor.

WEPC177	Collimation of High Intensity Ion Beams*	2403
	J. Pfister, O. Meusel IAP, Frankfurt am Main, Germany O.K. Kester GSI, Darmstadt, Germany
	Funding: HIC for FAIR Intense ion beams with small phase space occupation (high brilliance) are mandatory to keep beam losses low in high current injector accelerators like those planned for FAIR. The low energy beam transport from the ion source towards the linac has to keep the emittance growth low and has to support the optimization of the ion source tune. The Frankfurt Neutron Source Facility FRANZ is currently under construction. An intense beam of protons (2 MeV, 200 mA) will be used for neutron production using the Li⁷(p,n)Be⁷ reaction for studies of the astrophysical s-process. A collimation channel, which can be adjusted to allow the transport of beams with a certain beam emittance, is an ideal tool to optimize the ion source tune in terms of beam brightness. Therefore a collimation channel in the Low Energy Beam Transport section will be used. Through defined apertures and transversal phase space rotation using focusing solenoids the beam halo as well as unwanted H₂⁺ and H₃⁺ fractions will be cut. Theoretical studies which were carried out so far and a first design of the setup will be presented.

WEPS004	Confinement, Accumulation and Diagnostic of Low Energy Ion Beams in Toroidal Fields	2487
	M. Droba, A. Ates, O. Meusel, H. Niebuhr, U. Ratzinger, J.F. Wagner IAP, Frankfurt am Main, Germany
	An optimized design of a stellarator-type storage ring for low energy ion beams was numerically investigated. The magnetic field variation along the circumference and therefore magnetic heating is suppressed by using simple circular correction coils. Particle-in-Cell (PIC) simulations in a magnetic flux coordinate system show the ability of high current ion beam accumulation in such a configuration with unique features for clockwise and anticlockwise moving beams. Additionally scaled down experiments with two 30 degree room temperature toroidal segments were performed to demonstrate toroidal transport and to develop optical beam diagnostics. Properties of multi-component beams, redistribution of transversal momenta in the non-adiabatic part of the experimental configuration and investigation of strongly confined beam induced electron clouds will be addressed.

WEPS040	The Driver Linac of the Neutron Source FRANZ	2577
	U. Ratzinger, B. Basten, L.P. Chau, H. Dinter, M. Droba, M. Heilmann, M. Lotz, O. Meusel, I. Müller, D. Mäder, Y.C. Nie, D. Noll, H. Podlech, A. Schempp, W. Schweizer, K. Volk, C. Wiesner, C. Zhang IAP, Frankfurt am Main, Germany
	FRANZ is under construction at the Goethe University Frankfurt. A 2MeV ± 100 keV proton beam will produce 1 keV to 200 keV neutrons on a Li7 target. Experiments are planned in the field of nuclear astrophysics as well as in applied physics. A dc operated proton source with a maximum beam current of 200 mA was successfully beam tested end of 2010. FRANZ will have two experimental areas: One for activation experiments with cw proton beams of a few mA generating a usable neutron flux of some 10 billion per square cm per second, the other one for 250 kHz, 1 ns short neutron bunches generated by 1 ns proton pulses of a few Ampere beam current. A special 2 MeV, 175 MHz high current cavity is realized at present as a RFQ-DTL combination. Novel techniques have been invented to reach the needed pulsed target beam current by a bunch compressor system. Work supported by HICforFAIR and GSI.

THPS034	Studies on Electron Cloud Dynamics for an Optimized Space Charge Lens Design	3493
	K. Schulte, M. Droba, B. Glaeser, S. Klaproth, O. Meusel, U. Ratzinger IAP, Frankfurt am Main, Germany
	Funding: Work supported by HIC for FAIR. Space charge lenses using a stable electron cloud for focusing low energy heavy ion beams are an alternative concept to conventional ion optics. Due to external fields electrons are confined inside the lens’ volume. In case of a homogeneously distributed electron cloud the linear electric space charge field enables beam focusing free of aberration. Since the mapping quality of the lens is related to the confinement, non-destructive diagnostics has been developed to determine the plasma parameters and to characterize the collective behavior of the confined nonneutral plasma. Moreover, a scaled up space charge lens was constructed for a detailed investigation of the nonneutral plasma properties as well as beam interactions with a stable confined electron cloud. Experimental results will be presented in comparison with numerical simulations.

Paper

Title

Page

A Coupled RFQ-IH Combination for the Neutron Source FRANZ

74

M. Heilmann, O. Meusel, D. Mäder, U. Ratzinger, A. Schempp
IAP, Frankfurt am Main, Germany

Funding: HIC for FAIR
The Frankfurt Neutron Source at the Stern-Gerlach-Zentrum is driven by a 2 MeV proton linac consisting of a 4-rod-radio-frequency-quadrupol (RFQ) and an 8 gap IH-DTL structure. RFQ and IH cavity will be powered by only one radio frequency (RF) amplifier to reduce costs. The RF-amplifier of the RFQ-IH combination is coupled into the RFQ. Internal inductive coupling along the axis connects the RFQ with the IH cavity ensuring the required power transition as well as a fixed phase relation between the two structures. The main acceleration of 120 keV up to 2.03 MeV will be reached by the RFQ-IH combination with 175 MHz and at a total length of 2.3 m. The losses in the RFQ-IH combination are about 200 kW.

MOPS029

Experiments with a Fast Chopper System for Intense Ion Beams

664

H. Dinter, M. Droba, M. Lotz, O. Meusel, I. Müller, D. Noll, U. Ratzinger, K. Schulte, C. Wagner, C. Wiesner
IAP, Frankfurt am Main, Germany

Chopper systems are used to pulse charged particle beams. In most cases, electric deflection systems are used to generate beam pulses of defined lengths and appropriate repetition rates. At high beam intensities, the field distribution of the chopper system needs to be adapted precisely to the beam dynamics in order to avoid aberrations. An additional challenge is a robust design which guarantees reliable operation. For the Frankfurt Neutron Source FRANZ, an E×B chopper system is being developed which combines static magnetic deflection with a pulsed electric field in a Wien filter configuration. It will generate proton pulses with a flat top of 50 ns at a repetition rate of 250 kHz for 120 keV, 200 mA beams. For the electric deflection, pre-experiments with static and pulsed fields were performed using a helium ion beam. In pulsed mode operation, ion beams of different energies were deflected with voltages of up to ±6 kV and the resulting response was measured using a beam current transformer. A comparison between experiments and theoretical calculations as well as numerical simulations are presented.

MOPS030

Beam Dynamics of the FRANZ Bunch Compressor using Realistic Fields with a Focus on the Rebuncher Cavities

667

D. Noll, L.P. Chau, M. Droba, O. Meusel, H. Podlech, U. Ratzinger, C. Wiesner
IAP, Frankfurt am Main, Germany

Funding: Work supported by HIC for FAIR.
The ARMADILLO bunch compressor currently being designed at IAP is capable of reaching a longitudinal pulse compression ratio of 45 for proton beams of 150 mA at 2 MeV. It will provide one nanosecond proton pulses with a peak current of 7.7 A. The system guides nine linacμbunches deflected by a 5 MHz rf kicker and uses four dipole magnets - two homogeneous and two with field gradients - to merge them on the target. For longitudinal focusing and an energy variation of ±200 keV two multitrack rf cavities are included. ARMADILLO will be installed at the end of the Frankfurt Neutron Source FRANZ making use of the unique 250 kHz time structure. This contribution will provide an overview of the layout of the system as well as recent advances in component design and beam dynamics of the compressor.

WEPC177

Collimation of High Intensity Ion Beams*

2403

J. Pfister, O. Meusel
IAP, Frankfurt am Main, Germany
O.K. Kester
GSI, Darmstadt, Germany

Funding: HIC for FAIR
Intense ion beams with small phase space occupation (high brilliance) are mandatory to keep beam losses low in high current injector accelerators like those planned for FAIR. The low energy beam transport from the ion source towards the linac has to keep the emittance growth low and has to support the optimization of the ion source tune. The Frankfurt Neutron Source Facility FRANZ is currently under construction. An intense beam of protons (2 MeV, 200 mA) will be used for neutron production using the Li⁷(p,n)Be⁷ reaction for studies of the astrophysical s-process. A collimation channel, which can be adjusted to allow the transport of beams with a certain beam emittance, is an ideal tool to optimize the ion source tune in terms of beam brightness. Therefore a collimation channel in the Low Energy Beam Transport section will be used. Through defined apertures and transversal phase space rotation using focusing solenoids the beam halo as well as unwanted H₂⁺ and H₃⁺ fractions will be cut. Theoretical studies which were carried out so far and a first design of the setup will be presented.

WEPS004

Confinement, Accumulation and Diagnostic of Low Energy Ion Beams in Toroidal Fields

2487

M. Droba, A. Ates, O. Meusel, H. Niebuhr, U. Ratzinger, J.F. Wagner
IAP, Frankfurt am Main, Germany

An optimized design of a stellarator-type storage ring for low energy ion beams was numerically investigated. The magnetic field variation along the circumference and therefore magnetic heating is suppressed by using simple circular correction coils. Particle-in-Cell (PIC) simulations in a magnetic flux coordinate system show the ability of high current ion beam accumulation in such a configuration with unique features for clockwise and anticlockwise moving beams. Additionally scaled down experiments with two 30 degree room temperature toroidal segments were performed to demonstrate toroidal transport and to develop optical beam diagnostics. Properties of multi-component beams, redistribution of transversal momenta in the non-adiabatic part of the experimental configuration and investigation of strongly confined beam induced electron clouds will be addressed.

WEPS040

The Driver Linac of the Neutron Source FRANZ

2577

U. Ratzinger, B. Basten, L.P. Chau, H. Dinter, M. Droba, M. Heilmann, M. Lotz, O. Meusel, I. Müller, D. Mäder, Y.C. Nie, D. Noll, H. Podlech, A. Schempp, W. Schweizer, K. Volk, C. Wiesner, C. Zhang
IAP, Frankfurt am Main, Germany

FRANZ is under construction at the Goethe University Frankfurt. A 2MeV ± 100 keV proton beam will produce 1 keV to 200 keV neutrons on a Li7 target. Experiments are planned in the field of nuclear astrophysics as well as in applied physics. A dc operated proton source with a maximum beam current of 200 mA was successfully beam tested end of 2010. FRANZ will have two experimental areas: One for activation experiments with cw proton beams of a few mA generating a usable neutron flux of some 10 billion per square cm per second, the other one for 250 kHz, 1 ns short neutron bunches generated by 1 ns proton pulses of a few Ampere beam current. A special 2 MeV, 175 MHz high current cavity is realized at present as a RFQ-DTL combination. Novel techniques have been invented to reach the needed pulsed target beam current by a bunch compressor system.
Work supported by HICforFAIR and GSI.

THPS034

Studies on Electron Cloud Dynamics for an Optimized Space Charge Lens Design

3493

K. Schulte, M. Droba, B. Glaeser, S. Klaproth, O. Meusel, U. Ratzinger
IAP, Frankfurt am Main, Germany

Funding: Work supported by HIC for FAIR.
Space charge lenses using a stable electron cloud for focusing low energy heavy ion beams are an alternative concept to conventional ion optics. Due to external fields electrons are confined inside the lens’ volume. In case of a homogeneously distributed electron cloud the linear electric space charge field enables beam focusing free of aberration. Since the mapping quality of the lens is related to the confinement, non-destructive diagnostics has been developed to determine the plasma parameters and to characterize the collective behavior of the confined nonneutral plasma. Moreover, a scaled up space charge lens was constructed for a detailed investigation of the nonneutral plasma properties as well as beam interactions with a stable confined electron cloud. Experimental results will be presented in comparison with numerical simulations.