IPAC2011 - List of Authors (Luo, Y.)

Paper	Title	Page
MOPO022	Precision Beam Instrumentation and Feedback-Based Beam Control at RHIC	526
	M.G. Minty, W. Fischer, H. Huang, R.L. Hulsart, C. Liu, Y. Luo, G.J. Marr, A. Marusic, K. Mernick, R.J. Michnoff, V. Ptitsyn, G. Robert-Demolaize, T. Roser, V. Schoefer, S. Tepikian, M. Wilinski BNL, Upton, Long Island, New York, USA
	Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy. In this report we present advances in beam instrumentation required for feedback-based beam control at the Relativistic Heavy Ion Collider (RHIC). Improved resolution has contributed to enabling now routine acceleration with multiple feedback loops. Better measurement and control of the beam’s properties have allowed acceleration at a new working point and have facilitated challenging experimental studies.

TUPZ037	Momentum Aperture for the Low Beta* Lattices in RHIC Au-Au Runs	1891
	Y. Luo, K.A. Brown, W. Fischer, X. Gu, G. Robert-Demolaize, T. Roser, V. Schoefer, S. Tepikian, D. Trbojevic BNL, Upton, Long Island, New York, USA
	Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy. In this article we calculate the momentum apertures with the low beta* lattices of 100 GeV RHIC Au-Au run. With RF re-bucketing, the maximum off-momentum spread reaches 1.7 ·10^-03 at store. To improve the momentum aperture, we need to reduce the nonlinear chromaticities. The methods to correct second order chromaticities in RHIC rings are presented. We also scan beta* at IP6 and IP8 and working point. The challenges to further reduce beta* in the RHIC Au-Au operation are discussed.

TUPZ035	RHIC Polarized Proton Status and Operation Highlights	1888
	H. Huang, L. A. Ahrens, I.G. Alekseev, E.C. Aschenauer, G. Atoian, M. Bai, A. Bazilevsky, M. Blaskiewicz, J.M. Brennan, K.A. Brown, D. Bruno, A. Dion, K.A. Drees, W. Fischer, J.W. Glenn, X. Gu, L.T. Hoff, C. Liu, Y. Luo, W.W. MacKay, Y. Makdisi, G.J. Marr, A. Marusic, F. Méot, M.G. Minty, C. Montag, J. Morris, A. Poblaguev, V. Ptitsyn, G. Robert-Demolaize, T. Roser, W.B. Schmidke, V. Schoefer, D. Smirnov, S. Tepikian, J.E. Tuozzolo, G. Wang, K. Yip, A. Zaltsman, A. Zelenski, S.Y. Zhang BNL, Upton, Long Island, New York, USA D. Svirida ITEP, Moscow, Russia
	RHIC operation as the polarized proton collider presents unique challenges since both luminosity and spin polarization are important. A lot of upgrades and modifications have been made since last polarized proton operation. A 9 MHz rf system has been installed to improve longitudinal match at injection and to increase luminosity. A vertical survey of RHIC was performed before the run to get better magnet alignment. The orbit control has also been improved this year. AGS polarization transfer efficiency is improved by a horizontal tune jump system. To preserve polarization on the ramp, a new working point was chosen with the vertical tune near a third order resonance. The orbit and tune control are essential for polarization preservation. To calibrate the polarization level at 250 GeV, polarized protons were accelerated up to 250GeV and decelerated back to 100GeV. The tune, orbit and chromaticity feedback is essential for this operation. The new record of luminosity was achieved with higher polarization at 250 GeV in this run. The overview of the changes and operation results are presented in this paper.

TUPZ038	RHIC Performance for FY2011 Au+Au Heavy Ion Run	1894
	G.J. Marr, L. A. Ahrens, M. Bai, J. Beebe-Wang, I. Blackler, M. Blaskiewicz, J.M. Brennan, K.A. Brown, D. Bruno, J.J. Butler, C. Carlson, R. Connolly, T. D'Ottavio, K.A. Drees, A.V. Fedotov, W. Fischer, W. Fu, C.J. Gardner, D.M. Gassner, J.W. Glenn, X. Gu, M. Harvey, T. Hayes, L.T. Hoff, H. Huang, P.F. Ingrassia, J.P. Jamilkowski, N.A. Kling, M. Lafky, J.S. Laster, C. Liu, Y. Luo, M. Mapes, A. Marusic, K. Mernick, R.J. Michnoff, M.G. Minty, C. Montag, J. Morris, C. Naylor, S. Nemesure, S. Polizzo, V. Ptitsyn, G. Robert-Demolaize, T. Roser, P. Sampson, J. Sandberg, V. Schoefer, C. Schultheiss, F. Severino, T.C. Shrey, K.S. Smith, D. Steski, S. Tepikian, P. Thieberger, D. Trbojevic, N. Tsoupas, J.E. Tuozzolo, B. Van Kuik, G. Wang, M. Wilinski, A. Zaltsman, K. Zeno, S.Y. Zhang BNL, Upton, Long Island, New York, USA
	Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy. Following the Fiscal Year (FY) 2010 (Run-10) Relativistic Heavy Ion Collider (RHIC) Au+Au run [1], RHIC experiment upgrades sought to improve detector capabilities. In turn, accelerator improvements were made to improve the luminosity available to the experiments for this run (Run-11). These improvements included: a redesign of the stochastic cooling systems for improved reliability; a relocation of “common” RF cavities to alleviate intensity limits due to beam loading; and an improved usage of feedback systems to control orbit, tune and coupling during energy ramps as well as while colliding at top energy. We present an overview of changes to the Collider and review the performance of the collider with respect to instantaneous and integrated luminosity goals.

THPZ020	eRHIC Interaction Region Design	3729
	D. Trbojevic, J. Beebe-Wang, Y. Hao, D. Kayran, Y. Luo, V. Ptitsyn, N. Tsoupas BNL, Upton, Long Island, New York, USA V. Litvinenko Stony Brook University, Stony Brook, USA
	Funding: *Work performed under a Contract Number DE-AC02-98CH10886 with the auspices of the US Department of Energy. Interaction region design of the future electron ion collider at Relativistic Heavy Ion Collider (eRHIC) is presented. Polarized protons/Helium and heavy ions will collider with 5-30 GeV polarized electrons with a 10 mrad angle by using the crab cavity crossing. The interaction region is designed without bending electrons to avoid problems with synchrotron radiation. Use of the combined function magnet in the ion side allows detection of neutrons. Design allows detection of deep virtual scattering as well as detection of partons with lower energies (po/2.5). The betatron function at collisions is 5 cm assuming use of three dimensional electron beam cooling. Special chromaticity correction is applied in both sides of the ion straight section interaction region. Electrons arrive with avoiding completely synchrotron radiation at the detector. Special superconducting combined function magnet is designed to allow passage of electrons through the field free region.

Paper

Title

Page

Precision Beam Instrumentation and Feedback-Based Beam Control at RHIC

526

M.G. Minty, W. Fischer, H. Huang, R.L. Hulsart, C. Liu, Y. Luo, G.J. Marr, A. Marusic, K. Mernick, R.J. Michnoff, V. Ptitsyn, G. Robert-Demolaize, T. Roser, V. Schoefer, S. Tepikian, M. Wilinski
BNL, Upton, Long Island, New York, USA

Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy.
In this report we present advances in beam instrumentation required for feedback-based beam control at the Relativistic Heavy Ion Collider (RHIC). Improved resolution has contributed to enabling now routine acceleration with multiple feedback loops. Better measurement and control of the beam’s properties have allowed acceleration at a new working point and have facilitated challenging experimental studies.

TUPZ037

Momentum Aperture for the Low Beta* Lattices in RHIC Au-Au Runs

1891

Y. Luo, K.A. Brown, W. Fischer, X. Gu, G. Robert-Demolaize, T. Roser, V. Schoefer, S. Tepikian, D. Trbojevic
BNL, Upton, Long Island, New York, USA

Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy.
In this article we calculate the momentum apertures with the low beta* lattices of 100 GeV RHIC Au-Au run. With RF re-bucketing, the maximum off-momentum spread reaches 1.7 ·10^-03 at store. To improve the momentum aperture, we need to reduce the nonlinear chromaticities. The methods to correct second order chromaticities in RHIC rings are presented. We also scan beta* at IP6 and IP8 and working point. The challenges to further reduce beta* in the RHIC Au-Au operation are discussed.

TUPZ035

RHIC Polarized Proton Status and Operation Highlights

1888

H. Huang, L. A. Ahrens, I.G. Alekseev, E.C. Aschenauer, G. Atoian, M. Bai, A. Bazilevsky, M. Blaskiewicz, J.M. Brennan, K.A. Brown, D. Bruno, A. Dion, K.A. Drees, W. Fischer, J.W. Glenn, X. Gu, L.T. Hoff, C. Liu, Y. Luo, W.W. MacKay, Y. Makdisi, G.J. Marr, A. Marusic, F. Méot, M.G. Minty, C. Montag, J. Morris, A. Poblaguev, V. Ptitsyn, G. Robert-Demolaize, T. Roser, W.B. Schmidke, V. Schoefer, D. Smirnov, S. Tepikian, J.E. Tuozzolo, G. Wang, K. Yip, A. Zaltsman, A. Zelenski, S.Y. Zhang
BNL, Upton, Long Island, New York, USA
D. Svirida
ITEP, Moscow, Russia

RHIC operation as the polarized proton collider presents unique challenges since both luminosity and spin polarization are important. A lot of upgrades and modifications have been made since last polarized proton operation. A 9 MHz rf system has been installed to improve longitudinal match at injection and to increase luminosity. A vertical survey of RHIC was performed before the run to get better magnet alignment. The orbit control has also been improved this year. AGS polarization transfer efficiency is improved by a horizontal tune jump system. To preserve polarization on the ramp, a new working point was chosen with the vertical tune near a third order resonance. The orbit and tune control are essential for polarization preservation. To calibrate the polarization level at 250 GeV, polarized protons were accelerated up to 250GeV and decelerated back to 100GeV. The tune, orbit and chromaticity feedback is essential for this operation. The new record of luminosity was achieved with higher polarization at 250 GeV in this run. The overview of the changes and operation results are presented in this paper.

TUPZ038

RHIC Performance for FY2011 Au+Au Heavy Ion Run

1894

G.J. Marr, L. A. Ahrens, M. Bai, J. Beebe-Wang, I. Blackler, M. Blaskiewicz, J.M. Brennan, K.A. Brown, D. Bruno, J.J. Butler, C. Carlson, R. Connolly, T. D'Ottavio, K.A. Drees, A.V. Fedotov, W. Fischer, W. Fu, C.J. Gardner, D.M. Gassner, J.W. Glenn, X. Gu, M. Harvey, T. Hayes, L.T. Hoff, H. Huang, P.F. Ingrassia, J.P. Jamilkowski, N.A. Kling, M. Lafky, J.S. Laster, C. Liu, Y. Luo, M. Mapes, A. Marusic, K. Mernick, R.J. Michnoff, M.G. Minty, C. Montag, J. Morris, C. Naylor, S. Nemesure, S. Polizzo, V. Ptitsyn, G. Robert-Demolaize, T. Roser, P. Sampson, J. Sandberg, V. Schoefer, C. Schultheiss, F. Severino, T.C. Shrey, K.S. Smith, D. Steski, S. Tepikian, P. Thieberger, D. Trbojevic, N. Tsoupas, J.E. Tuozzolo, B. Van Kuik, G. Wang, M. Wilinski, A. Zaltsman, K. Zeno, S.Y. Zhang
BNL, Upton, Long Island, New York, USA

Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy.
Following the Fiscal Year (FY) 2010 (Run-10) Relativistic Heavy Ion Collider (RHIC) Au+Au run [1], RHIC experiment upgrades sought to improve detector capabilities. In turn, accelerator improvements were made to improve the luminosity available to the experiments for this run (Run-11). These improvements included: a redesign of the stochastic cooling systems for improved reliability; a relocation of “common” RF cavities to alleviate intensity limits due to beam loading; and an improved usage of feedback systems to control orbit, tune and coupling during energy ramps as well as while colliding at top energy. We present an overview of changes to the Collider and review the performance of the collider with respect to instantaneous and integrated luminosity goals.

THPZ020

eRHIC Interaction Region Design

3729

D. Trbojevic, J. Beebe-Wang, Y. Hao, D. Kayran, Y. Luo, V. Ptitsyn, N. Tsoupas
BNL, Upton, Long Island, New York, USA
V. Litvinenko
Stony Brook University, Stony Brook, USA

Funding: *Work performed under a Contract Number DE-AC02-98CH10886 with the auspices of the US Department of Energy.
Interaction region design of the future electron ion collider at Relativistic Heavy Ion Collider (eRHIC) is presented. Polarized protons/Helium and heavy ions will collider with 5-30 GeV polarized electrons with a 10 mrad angle by using the crab cavity crossing. The interaction region is designed without bending electrons to avoid problems with synchrotron radiation. Use of the combined function magnet in the ion side allows detection of neutrons. Design allows detection of deep virtual scattering as well as detection of partons with lower energies (po/2.5). The betatron function at collisions is 5 cm assuming use of three dimensional electron beam cooling. Special chromaticity correction is applied in both sides of the ion straight section interaction region. Electrons arrive with avoiding completely synchrotron radiation at the detector. Special superconducting combined function magnet is designed to allow passage of electrons through the field free region.