Author: Leemann, S.C.
Paper Title Page
MOPO010 Orbit Feedback System for the MAX IV 3 GeV Storage Ring 499
  • M. Sjöström, J. Ahlbäck, M.A.G. Johansson, S.C. Leemann, R. Nilsson
    MAX-lab, Lund, Sweden
  The paper describes the current orbit correction system design for the 3 GeV storage ring at the MAX IV laboratory, a light source facility under construction in Lund, Sweden. The orbit stability requirements for the 3 GeV storage ring are tight at roughly 200 nm vertical position stability in the insertion device (ID) straight sections. To meet this the ring will be equipped with 200 beam position monitors (BPMs) and 380 dipole corrector magnets, 200 in the horizontal and 180 in the vertical plane. The feedback loop solution, one slow orbit feedback (SOFB) loop and one fast orbit feedback (FOFB) loop in fast acquisition mode at 10,000 samples/second, will be presented. The paper will also discuss the various boundary conditions specific to the MAX IV 3 GeV storage ring design, such as a Cu vacuum chamber, and the impact on the corrector design.  
THPC058 The MAX IV Synchrotron Light Source 3026
  • M. Eriksson, J. Ahlbäck, Å. Andersson, M.A.G. Johansson, D. Kumbaro, S.C. Leemann, F. Lindau, L.-J. Lindgren, L. Malmgren, J.H. Modéer, R. Nilsson, M. Sjöström, J. Tagger, P.F. Tavares, S. Thorin, E.J. Wallén, S. Werin
    MAX-lab, Lund, Sweden
  • B. Anderberg
    AMACC, Uppsala, Sweden
  • L.O. Dallin
    CLS, Saskatoon, Saskatchewan, Canada
  The MAX IV synchrotron radiation facility is currently being constructed in Lund, Sweden. It consists of a 3 GeV linac injector and 2 storage rings operated at 1.5 and 3 GeV respectively. The linac injector will also be used for the generation of short X-ray pulses. The three machines mentioned above will be descibed with some emphasis on the effort to create a very small emittance in the 3 GeV ring. Some unconventional technical solutions will also be presented.  
THPC059 Recent Improvements to the Lattices for the MAX IV Storage Rings 3029
  • S.C. Leemann
    MAX-lab, Lund, Sweden
  Construction of the MAX IV facility started early this year. The facility will include two storage rings for the production of synchrotron radiation. The 3 GeV ring will house insertion devices for the production of x-rays while the 1.5 GeV ring will serve UV and IR users. Recently, the lattices for the storage rings in the MAX IV facility were updated. In the 3 GeV storage ring the vertical beam size in the long straights has been reduced. The lattice of the 1.5 GeV storage ring has been updated to take into account first results from detailed magnet and vacuum system designs. Additionally, a new injection method to facilitate commissioning of the storage rings has been studied. This paper summarizes the changes made in the lattices and the effect of these modifications.  
THPC054 Project Status of the Polish Synchrotron Radiation Facility Solaris 3014
  • C.J. Bocchetta, P.P. Goryl, K. Królas, M. Mlynarczyk, M.J. Stankiewicz, P.S. Tracz, Ł. Walczak, A.I. Wawrzyniak
    Solaris, Krakow, Poland
  • J. Ahlbäck, Å. Andersson, M. Eriksson, M.A.G. Johansson, D. Kumbaro, S.C. Leemann, L. Malmgren, J.H. Modéer, P.F. Tavares, S. Thorin
    MAX-lab, Lund, Sweden
  • E. Al-dmour, D. Einfeld
    CELLS-ALBA Synchrotron, Cerdanyola del Vallès, Spain
  Funding: European Regional Development Fund within the frame of the Innovative Economy Operational Program: POIG.02.01.00-12-213/09
The Polish synchrotron radiation facility Solaris is being built at the Jagiellonian University in Krakow. The project is based on an identical copy of the 1.5 GeV storage ring being concurrently built for the MAX IV project in Lund, Sweden. A general description of the facility is given together with a status of activities. Unique features associated with Solaris are outlined, such as infra-structure, the injector and operational characteristics.
THPC123 Injector Layout and Beam Injection into Solaris 3173
  • A.I. Wawrzyniak, C.J. Bocchetta
    Solaris, Krakow, Poland
  • S.C. Leemann, S. Thorin
    MAX-lab, Lund, Sweden
  Funding: European Regional Development Fund within the frame of the Innovative Economy Operational Program: POIG.02.01.00-12-213/09
The Solaris synchrotron radiation storage ring to be built in Krakow, Poland is based on the MAX IV 1.5 GeV design. The injector will be a linear accelerator and its components identical to those for the MAX IV project, however, injection is not at full energy and the injector layout is different. The linac and transfer line layout, optics and injection scheme into the storage ring is presented and an analysis of accumulation before energy ramping is discussed.