IPAC2011 - List of Authors (Lanza, G.)

Paper

Title

Page

The LHC Experimental Beam Pipe Neon Venting, Pumping and Conditioning

1557

V. Baglin, G. Bregliozzi, D. Calegari, J.M. Jimenez, G. Lanza, G. Schneider
CERN, Geneva, Switzerland

The experimental vacuum chambers of the four LHC experiments (ATLAS, CMS, LHCb and ALICE) are mechanically optimized in order to be transparent to particles. In order to grant their mechanical stability and to avoid any overstress, every time there was a request for detector opening or closing and for working in the vicinity of the vacuum chamber, the experimental beam vacuum chambers have been vented to atmospheric pressure. Since the LHC start up a safety procedure has been applied to mechanically secure the four experimental beam pipes during each long technical stop. Ultra-pure neon was used to preserve at best the NEG pumping efficiency. Up to now more than 15 neon injections and pump down have been performed without detecting any reduction of the NEG efficiency. This paper describes the Gas Injection System performances and the main points of the venting and pumping procedure. Details of the experimental beam pipe vacuum recovery and conditioning are presented for each of the four LHC experiments (ATLAS, CMS, LHCb and ALICE).

TUPS018

Observations of Electron Cloud Effects with the LHC Vacuum System

1560

V. Baglin, G. Bregliozzi, P. Chiggiato, P. Cruikshank, B. Henrist, J.M. Jimenez, G. Lanza
CERN, Geneva, Switzerland

In autumn 2010, during the LHC beam commissioning, electron-cloud effects producing pressure rise in common and single vacuum beam pipes, were observed. To understand the potential limitations for future operation, dedicated machine studies were performed with beams of 50 and 75 ns bunch spacing at energy of 450 GeV. In order to push further the LHC performances, a scrubbing run was held in spring 2011. This paper summarizes the vacuum observations made during these periods. The effects of bunch intensity and different filling schemes on the vacuum levels are discussed. Simulations taking into account the effective pumping speed at the location of the vacuum gauge are introduced. As a consequence, the different vacuum levels observed along the LHC ring could be explained. Finally, the results obtained during the scrubbing run are shown together with an estimation of pressure profiles during the 2011 run.

TUPS019

Synchrotron Radiation in the LHC Vacuum System

1563

V. Baglin, G. Bregliozzi, J.M. Jimenez, G. Lanza
CERN, Geneva, Switzerland

CERN is currently operating the Large Hadron Collider (LHC) with 3.5 TeV per beam. At this energy level, when the protons trajectory is bent, the protons emit synchrotron radiation (SR) with a critical energy of 5.5 eV. Under operation, SR induced molecular desorption is routinely observed in the LHC arcs, long straight sections and experiments. This contribution recalls the SR parameters over the LHC ring for the present and nominal beam parameters. Vacuum observations during energy ramp, after accumulation of dose and along the LHC ring are discussed. Expected pressure profiles and long term behaviours of vacuum levels will be also addressed.

THOBA01

Electron Cloud Observations in LHC

2862

G. Rumolo, G. Arduini, V. Baglin, H. Bartosik, P. Baudrenghien, N. Biancacci, G. Bregliozzi, S.D. Claudet, R. De Maria, J. Esteban Muller, M. Favier, C. Hansen, W. Höfle, J.M. Jimenez, V. Kain, E. Koukovini, G. Lanza, K.S.B. Li, G.H.I. Maury Cuna, E. Métral, G. Papotti, T. Pieloni, F. Roncarolo, B. Salvant, E.N. Shaposhnikova, R.J. Steinhagen, L.J. Tavian, D. Valuch, W. Venturini Delsolaro, F. Zimmermann
CERN, Geneva, Switzerland
C.M. Bhat
Fermilab, Batavia, USA
U. Iriso
CELLS-ALBA Synchrotron, Cerdanyola del Vallès, Spain
N. Mounet, C. Zannini
EPFL, Lausanne, Switzerland

Operation of LHC with bunch trains different spacings has revealed the formation of an electron cloud inside the machine. The main observations of electron cloud build-up are the pressure rise measured at the vacuum gauges in the warm regions, as well as the increase of the beam screen temperature in the cold regions due to an additional heat load. The effects of the electron cloud were also visible as a strong instability and emittance growth affecting the last bunches of longer trains, which could be improved running with higher chromaticity and/or larger transverse emittances. A summary of the 2010 and 2011 observations and measurements and a comparison with existing models will be presented. The efficiency of scrubbing and scrubbing strategies to improve the machine running performance will be also briefly discussed.

Slides THOBA01 [2.911 MB]

Paper	Title	Page
TUPS017	The LHC Experimental Beam Pipe Neon Venting, Pumping and Conditioning	1557
	V. Baglin, G. Bregliozzi, D. Calegari, J.M. Jimenez, G. Lanza, G. Schneider CERN, Geneva, Switzerland
	The experimental vacuum chambers of the four LHC experiments (ATLAS, CMS, LHCb and ALICE) are mechanically optimized in order to be transparent to particles. In order to grant their mechanical stability and to avoid any overstress, every time there was a request for detector opening or closing and for working in the vicinity of the vacuum chamber, the experimental beam vacuum chambers have been vented to atmospheric pressure. Since the LHC start up a safety procedure has been applied to mechanically secure the four experimental beam pipes during each long technical stop. Ultra-pure neon was used to preserve at best the NEG pumping efficiency. Up to now more than 15 neon injections and pump down have been performed without detecting any reduction of the NEG efficiency. This paper describes the Gas Injection System performances and the main points of the venting and pumping procedure. Details of the experimental beam pipe vacuum recovery and conditioning are presented for each of the four LHC experiments (ATLAS, CMS, LHCb and ALICE).

TUPS018	Observations of Electron Cloud Effects with the LHC Vacuum System	1560
	V. Baglin, G. Bregliozzi, P. Chiggiato, P. Cruikshank, B. Henrist, J.M. Jimenez, G. Lanza CERN, Geneva, Switzerland
	In autumn 2010, during the LHC beam commissioning, electron-cloud effects producing pressure rise in common and single vacuum beam pipes, were observed. To understand the potential limitations for future operation, dedicated machine studies were performed with beams of 50 and 75 ns bunch spacing at energy of 450 GeV. In order to push further the LHC performances, a scrubbing run was held in spring 2011. This paper summarizes the vacuum observations made during these periods. The effects of bunch intensity and different filling schemes on the vacuum levels are discussed. Simulations taking into account the effective pumping speed at the location of the vacuum gauge are introduced. As a consequence, the different vacuum levels observed along the LHC ring could be explained. Finally, the results obtained during the scrubbing run are shown together with an estimation of pressure profiles during the 2011 run.

TUPS019	Synchrotron Radiation in the LHC Vacuum System	1563
	V. Baglin, G. Bregliozzi, J.M. Jimenez, G. Lanza CERN, Geneva, Switzerland
	CERN is currently operating the Large Hadron Collider (LHC) with 3.5 TeV per beam. At this energy level, when the protons trajectory is bent, the protons emit synchrotron radiation (SR) with a critical energy of 5.5 eV. Under operation, SR induced molecular desorption is routinely observed in the LHC arcs, long straight sections and experiments. This contribution recalls the SR parameters over the LHC ring for the present and nominal beam parameters. Vacuum observations during energy ramp, after accumulation of dose and along the LHC ring are discussed. Expected pressure profiles and long term behaviours of vacuum levels will be also addressed.

THOBA01	Electron Cloud Observations in LHC	2862
	G. Rumolo, G. Arduini, V. Baglin, H. Bartosik, P. Baudrenghien, N. Biancacci, G. Bregliozzi, S.D. Claudet, R. De Maria, J. Esteban Muller, M. Favier, C. Hansen, W. Höfle, J.M. Jimenez, V. Kain, E. Koukovini, G. Lanza, K.S.B. Li, G.H.I. Maury Cuna, E. Métral, G. Papotti, T. Pieloni, F. Roncarolo, B. Salvant, E.N. Shaposhnikova, R.J. Steinhagen, L.J. Tavian, D. Valuch, W. Venturini Delsolaro, F. Zimmermann CERN, Geneva, Switzerland C.M. Bhat Fermilab, Batavia, USA U. Iriso CELLS-ALBA Synchrotron, Cerdanyola del Vallès, Spain N. Mounet, C. Zannini EPFL, Lausanne, Switzerland
	Operation of LHC with bunch trains different spacings has revealed the formation of an electron cloud inside the machine. The main observations of electron cloud build-up are the pressure rise measured at the vacuum gauges in the warm regions, as well as the increase of the beam screen temperature in the cold regions due to an additional heat load. The effects of the electron cloud were also visible as a strong instability and emittance growth affecting the last bunches of longer trains, which could be improved running with higher chromaticity and/or larger transverse emittances. A summary of the 2010 and 2011 observations and measurements and a comparison with existing models will be presented. The efficiency of scrubbing and scrubbing strategies to improve the machine running performance will be also briefly discussed.
	Slides THOBA01 [2.911 MB]