IPAC2011 - List of Authors (Ko, I.S.)

Paper	Title	Page
MOPC033	The Status of a 1.6-cell Photocathode RF Gun at PAL	142
	M.S. Chae, J.H. Hong, I.S. Ko, Y.W. Parc POSTECH, Pohang, Kyungbuk, Republic of Korea S.J. Park PAL, Pohang, Kyungbuk, Republic of Korea
	The RF power conditioning of the photocathode RF gun with four holes at the side of the full cell named as 'Pohang gun' is in progress. The first goal of the conditioning is the operation of the gun with RF pulse width of 1.5 μm, repetition rate of 30 Hz, field gradient at the cathode of 130 MV/m. We operated the RF gun successfully with the conditions within last few months. It was first operational experience with such conditions in PAL. Now we have a plan to operate RF gun with higher repetition rate up to 60 Hz.

MOPC034	Design of a 0.6-cell Cell Photocathode RF Gun for FED	145
	Y.W. Parc, M.S. Chae, I.S. Ko POSTECH, Pohang, Kyungbuk, Republic of Korea
	Final goal of this study is the development of single cell radio-frequency (RF) electron gun which is optimized to the femotosecond electron diffraction. This study will open new technology basis for the laboratory research in the femto-second (fs) chemistry at the university. RF electron gun will be fabricated with single cell which will reduce the cost and effort. We will also conduct a simulation study to find an optimized operation condition of the RF gun to provide the best electron beam to the femtosecond electron diffraction experimentalist. In this presentation, we will show the status of the RF gun development. The results with the simulation code PARMELA will be presented to find the optimal operation condition of the single cell RF gun for FED.

Paper

Title

Page

The Status of a 1.6-cell Photocathode RF Gun at PAL

142

M.S. Chae, J.H. Hong, I.S. Ko, Y.W. Parc
POSTECH, Pohang, Kyungbuk, Republic of Korea
S.J. Park
PAL, Pohang, Kyungbuk, Republic of Korea

The RF power conditioning of the photocathode RF gun with four holes at the side of the full cell named as 'Pohang gun' is in progress. The first goal of the conditioning is the operation of the gun with RF pulse width of 1.5 μm, repetition rate of 30 Hz, field gradient at the cathode of 130 MV/m. We operated the RF gun successfully with the conditions within last few months. It was first operational experience with such conditions in PAL. Now we have a plan to operate RF gun with higher repetition rate up to 60 Hz.

MOPC034

Design of a 0.6-cell Cell Photocathode RF Gun for FED

145

Y.W. Parc, M.S. Chae, I.S. Ko
POSTECH, Pohang, Kyungbuk, Republic of Korea

Final goal of this study is the development of single cell radio-frequency (RF) electron gun which is optimized to the femotosecond electron diffraction. This study will open new technology basis for the laboratory research in the femto-second (fs) chemistry at the university. RF electron gun will be fabricated with single cell which will reduce the cost and effort. We will also conduct a simulation study to find an optimized operation condition of the RF gun to provide the best electron beam to the femtosecond electron diffraction experimentalist. In this presentation, we will show the status of the RF gun development. The results with the simulation code PARMELA will be presented to find the optimal operation condition of the single cell RF gun for FED.