IPAC2011 - List of Authors (Inoue, F.)

Paper	Title	Page
MOPC095	Superconducting Cavity R&D for ILC at MHI	298
	H. Hitomi, H. Hara, F. Inoue, K. Kanaoka, K. Sennyu, T. Yanagisawa MHI, Kobe, Japan
	We have developed and manufactured some superconducting RF cavity for STF project in KEK. In recent vertical test in KEK, the MHI-#12 cavity which is one of cavities for STF phase 2 project reached ILC specification(max Eacc was about 40MV/m). So techniques for manufacturing cavity is making steady progress in MHI. To be realized ILC project, we also try to decrease the manufacturing cost by using some new techniques, for example Laser Beam Welding, deep drawing, seamless dumbbell, etc. In this meeting, we will report recent MHI's activities for ILC.

TUPS085	Mass Production Report of C-band Choke Mode Accelerating Structure and RF Pulse Compressor	1737
	S. Miura, T. Hashirano, F. Inoue, K. Okihira MHI, Kobe, Japan T. Inagaki RIKEN/SPring-8, Hyogo, Japan H. Maesaka, T. Shintake RIKEN Spring-8 Harima, Hyogo, Japan
	RIKEN and JASRI already completed the construction of XFEL/SPring8. Recently the facility was named “SACLA” (SPring-8 Angstrom Compact Free Electron LAser). The commissioning team succeeded in acceleration of 8 GeV electron beam and observation of the undulator light of 0.8 angstrom wavelength in March 2011. Now the accelerator is stably operated for the XFEL commissioning. In this project, a C-band (5712 MHz) choke mode accelerating structures and C-band RF pulse compressors are employed to obtain a high acceleration gradient of more than 35 MeV/m. We completed the fabrication of 128 accelerating structures, 64 RF pulse compressors, and 64 units of waveguide components and conducted RF measurements on them until May 2010. We report the result of the mass-production of these 64 C-Band units.

Paper

Title

Page

Superconducting Cavity R&D for ILC at MHI

298

H. Hitomi, H. Hara, F. Inoue, K. Kanaoka, K. Sennyu, T. Yanagisawa
MHI, Kobe, Japan

We have developed and manufactured some superconducting RF cavity for STF project in KEK. In recent vertical test in KEK, the MHI-#12 cavity which is one of cavities for STF phase 2 project reached ILC specification(max Eacc was about 40MV/m). So techniques for manufacturing cavity is making steady progress in MHI. To be realized ILC project, we also try to decrease the manufacturing cost by using some new techniques, for example Laser Beam Welding, deep drawing, seamless dumbbell, etc. In this meeting, we will report recent MHI's activities for ILC.

TUPS085

Mass Production Report of C-band Choke Mode Accelerating Structure and RF Pulse Compressor

1737

S. Miura, T. Hashirano, F. Inoue, K. Okihira
MHI, Kobe, Japan
T. Inagaki
RIKEN/SPring-8, Hyogo, Japan
H. Maesaka, T. Shintake
RIKEN Spring-8 Harima, Hyogo, Japan

RIKEN and JASRI already completed the construction of XFEL/SPring8. Recently the facility was named “SACLA” (SPring-8 Angstrom Compact Free Electron LAser). The commissioning team succeeded in acceleration of 8 GeV electron beam and observation of the undulator light of 0.8 angstrom wavelength in March 2011. Now the accelerator is stably operated for the XFEL commissioning. In this project, a C-band (5712 MHz) choke mode accelerating structures and C-band RF pulse compressors are employed to obtain a high acceleration gradient of more than 35 MeV/m. We completed the fabrication of 128 accelerating structures, 64 RF pulse compressors, and 64 units of waveguide components and conducted RF measurements on them until May 2010. We report the result of the mass-production of these 64 C-Band units.