IPAC2011 - List of Authors (Hatakeyama, S.)

Paper	Title	Page
TUPC103	Monitoring of the Betatron Tune and Amplitude at Multi-batch Injection of J-PARC MR	1254
	S. Hatakeyama JAEA/J-PARC, Tokai-mura, Japan M. Takagi Kanto Information Service (KIS), Accelerator Group, Ibaraki, Japan M. Tejima, T. Toyama KEK, Ibaraki, Japan
	The beam power of J-PARC Main Ring Synchrotron (MR) increased gradually from 2008, and came to be able regularly to supply the beam of 145kW February, 2011. Many of current beam losses are localized to the collimator located on the injection section. One of the problems of the beam injection is that the orbit of the beam transportation line is unstable. It causes sometimes large transverse injection error. Because the transverse injection error is essentially proportional to the amplitude of the betatron oscillation, it is possible to observe by measuring the turn-by-turn position for every bunch of injected beam by using BPMs located on the injection section. In this report, it is described the method how to measure injection error from beam position. It is also discussed about the effect of reflection wave of injection kicker magnets.

THPS040	Measurement of the Stripping Efficiency for HBC Stripper Foil in the 3-GeV RCS of J-PARC	3511
	P.K. Saha, H. Harada, S. Hatakeyama, H. Hotchi, M. Kinsho, Y. Yamazaki, M. Yoshimoto JAEA/J-PARC, Tokai-Mura, Naka-Gun, Ibaraki-Ken, Japan Y. Irie, I. Sugai KEK, Ibaraki, Japan
	We have carried out experimental measurement of the stripping efficiency for the newly developed HBC (Hybrid type Boron doped Carbon) stripper foils. The HBC foil is used for charge-exchange injection in the RCS (Rapid Cycling Synchrotron) of J-PARC (Japan Proton Accelerator Research Complex) and plays an important role for the RCS operation. We have developed a rather simple but very precise method using which stripping efficiencies for several HBC foils were determined accurately. Importance of knowing an accurate stripping efficiency so as to determine a realistic stripper foil for the RCS operation will be discussed.

Paper

Title

Page

Monitoring of the Betatron Tune and Amplitude at Multi-batch Injection of J-PARC MR

1254

S. Hatakeyama
JAEA/J-PARC, Tokai-mura, Japan
M. Takagi
Kanto Information Service (KIS), Accelerator Group, Ibaraki, Japan
M. Tejima, T. Toyama
KEK, Ibaraki, Japan

The beam power of J-PARC Main Ring Synchrotron (MR) increased gradually from 2008, and came to be able regularly to supply the beam of 145kW February, 2011. Many of current beam losses are localized to the collimator located on the injection section. One of the problems of the beam injection is that the orbit of the beam transportation line is unstable. It causes sometimes large transverse injection error. Because the transverse injection error is essentially proportional to the amplitude of the betatron oscillation, it is possible to observe by measuring the turn-by-turn position for every bunch of injected beam by using BPMs located on the injection section. In this report, it is described the method how to measure injection error from beam position. It is also discussed about the effect of reflection wave of injection kicker magnets.

THPS040

Measurement of the Stripping Efficiency for HBC Stripper Foil in the 3-GeV RCS of J-PARC

3511

P.K. Saha, H. Harada, S. Hatakeyama, H. Hotchi, M. Kinsho, Y. Yamazaki, M. Yoshimoto
JAEA/J-PARC, Tokai-Mura, Naka-Gun, Ibaraki-Ken, Japan
Y. Irie, I. Sugai
KEK, Ibaraki, Japan

We have carried out experimental measurement of the stripping efficiency for the newly developed HBC (Hybrid type Boron doped Carbon) stripper foils. The HBC foil is used for charge-exchange injection in the RCS (Rapid Cycling Synchrotron) of J-PARC (Japan Proton Accelerator Research Complex) and plays an important role for the RCS operation. We have developed a rather simple but very precise method using which stripping efficiencies for several HBC foils were determined accurately. Importance of knowing an accurate stripping efficiency so as to determine a realistic stripper foil for the RCS operation will be discussed.