IPAC2011 - List of Authors (Brachmann, A.)

Paper	Title	Page
THPC134	LCLS RF Gun Copper Cathode Performance	3200
	A. Brachmann, F.-J. Decker, P. Emma, R.H. Iverson, P. Stefan, J.L. Turner, F. Zhou SLAC, Menlo Park, California, USA
	Funding: Work supported by Department of Energy contract DE-AC03-76SF00515 We report on the performance and the operational experience of the LCLS RF gun copper photocathodes used during the LCLS run I, II, III and IV. We discuss the problems of cathode surface contamination and our experience with methods to remove such contamination. Techniques to obtain high quantum efficiency (QE) while preserving the low emittance quality are discussed. Furthermore, we will present the current status of the installed cathode, its quantum efficiency and the typical injector emittances of the extracted beam.

THPZ003	The SuperB Project: Accelerator Status and R&D	3684
	M.E. Biagini, S. Bini, R. Boni, M. Boscolo, B. Buonomo, T. Demma, E. Di Pasquale, A. Drago, L.G. Foggetta, S. Guiducci, S.M. Liuzzo, G. Mazzitelli, L. Pellegrino, M.A. Preger, P. Raimondi, U. Rotundo, C. Sanelli, M. Serio, A. Stecchi, A. Stella, S. Tomassini, M. Zobov INFN/LNF, Frascati (Roma), Italy M.A. Baylac, O. Bourrion, J.-M. De Conto, N. Monseu, C. Vescovi LPSC, Grenoble, France K.J. Bertsche, A. Brachmann, Y. Cai, A. Chao, M.H. Donald, R.C. Field, A.S. Fisher, D. Kharakh, A. Krasnykh, K.C. Moffeit, Y. Nosochkov, A. Novokhatski, M.T.F. Pivi, J.T. Seeman, M.K. Sullivan, S.P. Weathersby, A.W. Weidemann, U. Wienands, W. Wittmer, G. Yocky SLAC, Menlo Park, California, USA S. Bettoni PSI, Villigen, Switzerland A.V. Bogomyagkov, I. Koop, E.B. Levichev, S.A. Nikitin, I.N. Okunev, P.A. Piminov, D.N. Shatilov, S.V. Sinyatkin, P. Vobly BINP SB RAS, Novosibirsk, Russia B. Bolzon, M. Esposito CERN, Geneva, Switzerland F. Bosi INFN-Pisa, Pisa, Italy L. Brunetti, A. Jeremie IN2P3-LAPP, Annecy-le-Vieux, France A. Chancé CEA, Gif-sur-Yvette, France P. Fabbricatore, S. Farinon, R. Musenich INFN Genova, Genova, Italy E. Paoloni University of Pisa and INFN, Pisa, Italy C. Rimbault, A. Variola LAL, Orsay, France Y. Zhang IHEP Beijing, Beijing, People's Republic of China
	The SuperB collider project has been recently approved by the Italian Government as part of the National Research Plan. SuperB is a high luminosity (10³6 cm^-2 s^-1) asymmetric e⁺e⁻ collider at the Y(4S) energy. The design is based on a “large Piwinski angle and Crab Waist” scheme already successfully tested at the DAΦNE Phi-Factory in Frascati, Italy. The project combines the challenges of high luminosity colliders and state-of-the-art synchrotron light sources, with two beams (e⁺ at 6.7 and e^- at 4.2 GeV) with extremely low emittances and small beam sizes at the Interaction Point. As unique features, the electron beam will be longitudinally polarized at the IP and the rings will be able to ramp down to collide at the tau/charm energy threshold with one tenth the luminosity. The relatively low beam currents (about 2 A) will allow for low running (power) costs compared to similar machines. The insertion of beam lines for synchrotron radiation users is the latest feature included in the design. The lattice has been recently modified to accommodate insertion devices for X-rays production. A status of the project and a description of R&D in progress will be presented.

Paper

Title

Page

LCLS RF Gun Copper Cathode Performance

3200

A. Brachmann, F.-J. Decker, P. Emma, R.H. Iverson, P. Stefan, J.L. Turner, F. Zhou
SLAC, Menlo Park, California, USA

Funding: Work supported by Department of Energy contract DE-AC03-76SF00515
We report on the performance and the operational experience of the LCLS RF gun copper photocathodes used during the LCLS run I, II, III and IV. We discuss the problems of cathode surface contamination and our experience with methods to remove such contamination. Techniques to obtain high quantum efficiency (QE) while preserving the low emittance quality are discussed. Furthermore, we will present the current status of the installed cathode, its quantum efficiency and the typical injector emittances of the extracted beam.

THPZ003

The SuperB Project: Accelerator Status and R&D

3684

M.E. Biagini, S. Bini, R. Boni, M. Boscolo, B. Buonomo, T. Demma, E. Di Pasquale, A. Drago, L.G. Foggetta, S. Guiducci, S.M. Liuzzo, G. Mazzitelli, L. Pellegrino, M.A. Preger, P. Raimondi, U. Rotundo, C. Sanelli, M. Serio, A. Stecchi, A. Stella, S. Tomassini, M. Zobov
INFN/LNF, Frascati (Roma), Italy
M.A. Baylac, O. Bourrion, J.-M. De Conto, N. Monseu, C. Vescovi
LPSC, Grenoble, France
K.J. Bertsche, A. Brachmann, Y. Cai, A. Chao, M.H. Donald, R.C. Field, A.S. Fisher, D. Kharakh, A. Krasnykh, K.C. Moffeit, Y. Nosochkov, A. Novokhatski, M.T.F. Pivi, J.T. Seeman, M.K. Sullivan, S.P. Weathersby, A.W. Weidemann, U. Wienands, W. Wittmer, G. Yocky
SLAC, Menlo Park, California, USA
S. Bettoni
PSI, Villigen, Switzerland
A.V. Bogomyagkov, I. Koop, E.B. Levichev, S.A. Nikitin, I.N. Okunev, P.A. Piminov, D.N. Shatilov, S.V. Sinyatkin, P. Vobly
BINP SB RAS, Novosibirsk, Russia
B. Bolzon, M. Esposito
CERN, Geneva, Switzerland
F. Bosi
INFN-Pisa, Pisa, Italy
L. Brunetti, A. Jeremie
IN2P3-LAPP, Annecy-le-Vieux, France
A. Chancé
CEA, Gif-sur-Yvette, France
P. Fabbricatore, S. Farinon, R. Musenich
INFN Genova, Genova, Italy
E. Paoloni
University of Pisa and INFN, Pisa, Italy
C. Rimbault, A. Variola
LAL, Orsay, France
Y. Zhang
IHEP Beijing, Beijing, People's Republic of China

The SuperB collider project has been recently approved by the Italian Government as part of the National Research Plan. SuperB is a high luminosity (10³6 cm^-2 s^-1) asymmetric e⁺e⁻ collider at the Y(4S) energy. The design is based on a “large Piwinski angle and Crab Waist” scheme already successfully tested at the DAΦNE Phi-Factory in Frascati, Italy. The project combines the challenges of high luminosity colliders and state-of-the-art synchrotron light sources, with two beams (e⁺ at 6.7 and e^- at 4.2 GeV) with extremely low emittances and small beam sizes at the Interaction Point. As unique features, the electron beam will be longitudinally polarized at the IP and the rings will be able to ramp down to collide at the tau/charm energy threshold with one tenth the luminosity. The relatively low beam currents (about 2 A) will allow for low running (power) costs compared to similar machines. The insertion of beam lines for synchrotron radiation users is the latest feature included in the design. The lattice has been recently modified to accommodate insertion devices for X-rays production. A status of the project and a description of R&D in progress will be presented.