ICALEPCS2011 - List of Authors (Golonka, P.)

Paper

Title

Page

Integrating Controls Frameworks: Control Systems for NA62 LAV Detector Test Beams

285

O. Holme, J.A.R. Arroyo Garcia, P. Golonka, M. Gonzalez-Berges, H. Milcent
CERN, Geneva, Switzerland
O. Holme
ETH, Zurich, Switzerland

The detector control system for the NA62 experiment at CERN, to be ready for physics data-taking in 2014, is going to be built based on control technologies recommended by the CERN Engineering group. A rich portfolio of the technologies is planned to be showcased and deployed in the final application, and synergy between them is needed. In particular two approaches to building controls application need to play in harmony: the use of the high-level application framework called UNICOS, and a bottom-up approach of development based on the components of the JCOP Framework. The aim of combining the features provided by the two frameworks is to avoid duplication of functionality and minimize the maintenance and development effort for future controls applications. In the paper the result of the integration efforts obtained so far are presented; namely the control applications developed for beam-testing of NA62 detector prototypes. Even though the delivered applications are simple, significant conceptual and development work was required to bring about the smooth inter-play between the two frameworks, while assuring the possibility of unleashing their full power. A discussion of current open issues is presented, including the viability of the approach for larger-scale applications of high complexity, such as the complete detector control system for the NA62 detector.

Poster MOPMN020 [1.464 MB]

WEPMS005

Automated Coverage Tester for the Oracle Archiver of WinCC OA

981

A. Voitier, P. Golonka, M. Gonzalez-Berges
CERN, Geneva, Switzerland

A large number of control systems at CERN are built with the commercial SCADA tool WinCC OA. They cover projects in the experiments, accelerators and infrastructure. An important component is the Oracle archiver used for long term storage of process data (events) and alarms. The archived data provide feedback to the operators and experts about how the system was behaving at particular moment in the past. In addition a subset of these data is used for offline physics analysis. The consistency of the archived data has to be ensured from writing to reading as well as throughout updates of the control systems. The complexity of the archiving subsystem comes from the multiplicity of data types, required performance and other factors such as operating system, environment variables or versions of the different software components, therefore an automatic tester has been implemented to systematically execute test scenarios under different conditions. The tests are based on scripts which are automatically generated from templates. Therefore they can cover a wide range of software contexts. The tester has been fully written in the same software environment as the targeted SCADA system. The current implementation is able to handle over 300 test cases, both for events and alarms. It has enabled to report issues to the provider of WinCC OA. The template mechanism allows sufficient flexibility to adapt the suite of tests to future needs. The developed tools are generic enough to be used to tests other parts of the control systems.

Poster WEPMS005 [0.279 MB]

Paper	Title	Page
MOPMN020	Integrating Controls Frameworks: Control Systems for NA62 LAV Detector Test Beams	285
	O. Holme, J.A.R. Arroyo Garcia, P. Golonka, M. Gonzalez-Berges, H. Milcent CERN, Geneva, Switzerland O. Holme ETH, Zurich, Switzerland
	The detector control system for the NA62 experiment at CERN, to be ready for physics data-taking in 2014, is going to be built based on control technologies recommended by the CERN Engineering group. A rich portfolio of the technologies is planned to be showcased and deployed in the final application, and synergy between them is needed. In particular two approaches to building controls application need to play in harmony: the use of the high-level application framework called UNICOS, and a bottom-up approach of development based on the components of the JCOP Framework. The aim of combining the features provided by the two frameworks is to avoid duplication of functionality and minimize the maintenance and development effort for future controls applications. In the paper the result of the integration efforts obtained so far are presented; namely the control applications developed for beam-testing of NA62 detector prototypes. Even though the delivered applications are simple, significant conceptual and development work was required to bring about the smooth inter-play between the two frameworks, while assuring the possibility of unleashing their full power. A discussion of current open issues is presented, including the viability of the approach for larger-scale applications of high complexity, such as the complete detector control system for the NA62 detector.
	Poster MOPMN020 [1.464 MB]

WEPMS005	Automated Coverage Tester for the Oracle Archiver of WinCC OA	981
	A. Voitier, P. Golonka, M. Gonzalez-Berges CERN, Geneva, Switzerland
	A large number of control systems at CERN are built with the commercial SCADA tool WinCC OA. They cover projects in the experiments, accelerators and infrastructure. An important component is the Oracle archiver used for long term storage of process data (events) and alarms. The archived data provide feedback to the operators and experts about how the system was behaving at particular moment in the past. In addition a subset of these data is used for offline physics analysis. The consistency of the archived data has to be ensured from writing to reading as well as throughout updates of the control systems. The complexity of the archiving subsystem comes from the multiplicity of data types, required performance and other factors such as operating system, environment variables or versions of the different software components, therefore an automatic tester has been implemented to systematically execute test scenarios under different conditions. The tests are based on scripts which are automatically generated from templates. Therefore they can cover a wide range of software contexts. The tester has been fully written in the same software environment as the targeted SCADA system. The current implementation is able to handle over 300 test cases, both for events and alarms. It has enabled to report issues to the provider of WinCC OA. The template mechanism allows sufficient flexibility to adapt the suite of tests to future needs. The developed tools are generic enough to be used to tests other parts of the control systems.
	Poster WEPMS005 [0.279 MB]